01 COA & batch testing

What the COA for acid protease actually contains

Technical document 01 · Reviewed 2026-11-19 · Acid Protease

On this page
  1. The certificate as a test report
  2. The unit is a rate, and the method defines it
  3. Where the limit ends and the result begins
  4. What moves between batches
  5. When a second laboratory earns its fee
  6. Six lines for a supplier comparison

An acid protease certificate is read in two halves. The first half is routine: appearance, moisture, mesh, metals and microbiology. The second half is the activity line, and that line is a measurement whose value depends on the method behind it — the substrate, the acid pH, the temperature and the standard. The limits shown here are the catalog specification for acid protease powder; a batch COA is the record for one lot.

In one line

The activity figure on an acid protease COA is a rate measured at a named acid pH, so the unit definition, the substrate and the assay conditions have to appear beside the number.

The certificate as a test report

A certificate should let a reviewer reconstruct the release without asking the supplier. Each row needs the parameter, the method and the acceptance limit; the measured result should sit in its own column. For an enzyme, the activity row needs two more things: the unit definition and the assay conditions.

Catalog release limits · acid protease powder
ParameterMethodRelease limit
AppearanceVisualWhite to off-white, free-flowing powder
Acid protease activityFolin-Ciocalteu colour at acid pH; substrate and conditions printed on the COA≥100,000 U/g
IdentificationActivity assay and infrared spectroscopyConforms to the reference
Loss on dryingGravimetric≤8.0%
Particle sizeSieve analysis≥95% through 40 mesh
Heavy metalsICP-MSPb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg
MicrobiologyPlate count and absence testsAPC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent

Read the identification row carefully. Infrared spectroscopy confirms that the sample is protein, not which protein; the activity assay confirms that the protein cuts a substrate under acid conditions. The organism that produced it is a specification item, not a certificate line.

The unit is a rate, and the method defines it

U is a rate. One unit is defined by the amount of product released per minute under fixed conditions, so a number without those conditions cannot be compared with anything. The common acid protease method uses casein at pH 3.0 and 40 °C, stops the digestion after a set time and quantifies the released tyrosine with Folin-Ciocalteu reagent. One U corresponds to 1 µg of tyrosine equivalent per minute. A method sheet that uses another acid pH or another protein is a different scale, even if it prints the same U/g.

The activity entry · what a complete method states
ElementWhat it has to sayWhy it moves the result
UnitU per gram of the powder as soldActivity per gram of protein is a different measure
SubstrateThe protein used, with grade and concentrationDifferent proteins expose different bonds
pHThe acid pH of the assay, typically 3.0Rate changes sharply across the acid profile
Temperature40 °C in the common method, or as statedHeat raises the rate until unfolding begins
TimeDigestion time before the reaction is stoppedThe reaction is linear only for part of the curve
DetectionFolin-Ciocalteu colour, tyrosine standardThe standard curve sets the scale
BasisAs-is or dry-solids correctedWater changes the denominator

Moisture is the quiet variable. A powder at 100,000 U/g as-is with 8.0% loss on drying corresponds to about 108,700 U/g on dry solids. Both numbers are true, and a comparison that ignores the basis invents a difference. Multiply the per-gram figure by the pack weight to get the units in the pack: 1 kg carries 100 million U at the catalog floor.

Where the limit ends and the result begins

Activity has a floor, not a ceiling. A lot at 103,000 U/g and a lot at 170,000 U/g both meet ≥100,000 U/g, but the second leaves more room for losses in granulation, tableting or storage. The result column is where that difference appears; the limit column never shows it.

A certificate that prints the specification range as the result has not reported a measurement. Ask for the measured value, the method used and the release date. Also ask whether the figure is release activity or end-of-shelf-life activity; those are different promises. A lot shipped late in its life arrives with less than the release figure. The methods index shows how the assay families are described.

What moves between batches

Three stages move the activity. Fermentation determines how much enzyme the broth contains; recovery and concentration determine how much survives into the concentrate; standardisation and drying determine where the powder lands per gram. Because the last stage is a blend, two lots can agree on U/g and disagree on protein, carrier and specific activity.

Process temperature and moisture move the result during drying and milling. A darker or greyer shade can follow a longer hold or a hotter dryer while the activity still passes, so colour is a prompt to ask, not a release test. The pH of a 1% solution can shift with the fermentation or with the salts used in standardisation. The method can shift too: a new substrate lot or a different assay pH makes two U/g figures non-comparable, even when both certificates look identical.

When a second laboratory earns its fee

An independent laboratory is useful when the source is new, the market is regulated, the result is disputed or the customer requires its own release. The core panel is activity by the customer's method on a retained sample, protein, moisture, metals by ICP-MS, microbiology and a protein pattern by gel electrophoresis. Add a pH-activity profile when the identity of the enzyme is contested.

Insist that the referee uses the same substrate and acid pH as the specification; otherwise the exercise compares methods. Each metal result should carry a reporting limit, and each microbiological absence should name the test. The sample tested and the sample retained must be the same, with the lot code on the certificate, the pack and the report.

Six lines for a supplier comparison

Compare six things: preparation and CAS, unit definition and assay pH, measured activity, protein and specific activity, moisture and mesh, organism and carrier. A quotation that matches only on the activity figure has matched one line out of six.

The second question is traceability. The lot code, organism, carrier and specification version should line up across the certificate, the pack and the retained sample. The product page lists the catalog values; the identity page covers the evidence; the neutral protease page shows the other pH window; the quality page describes release.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation