Taurine: MOQ, packaging and ordering
A taurine order starts at 1 kg, packed in a foil pouch and shipped with the certificate for the lot it came from. The lead time is 1–7 days after the specification and the order are confirmed. Everything else in the quotation follows from four variables: the grade, the pack, the destination and the documents the destination requires.
One kilogram from a released lot, with that lot's certificate, is the minimum; the rest of the quotation is grade, pack and destination.
Why the minimum is one kilogram
One kilogram is the smallest unit that still carries a lot identity. It is enough for a bench trial, enough for a second trial after the formula changes, and enough to keep a retained sample for the life of the project. Below that, a material stops being a lot and becomes a hand sample, and a hand sample cannot support a label claim or a release decision.
The minimum is a packing unit, not a volume tier. A buyer who needs 500 g should ask for a sample rather than a split pouch, because a split pouch loses the sealed liner and the lot label that make the material traceable. A buyer who needs 30 kg should ask for the drum, because two pouches are not the same pack and the freight is different.
Packaging
| Pack | Net weight | Material | Typical use | Watch |
|---|---|---|---|---|
| Foil pouch | 1 kg | Foil laminate, sealed | Bench trial, small batch, retained sample | Reseal after opening; keep the lot label |
| Fiber drum | 25 kg | Fiber drum with sealed liner | Production batch | Liner and closure carry the moisture barrier |
Both packs rely on the liner rather than on the outer wall. A pouch that has been opened and folded closed is not sealed, and a drum that has been opened for a partial weigh-out is no longer a controlled environment unless the liner is closed again. The label on the pack should carry the product name, the lot number, the net weight and the pack date; the certificate should carry the same lot number.
Lead time
The 1–7 day window is measured from two confirmations: the specification and the order. A quotation is not a confirmation, and an order placed against a different specification is a new order. If the material is held in stock in the standard pack, the window is short. If the grade has to be milled to 80 mesh or granulated, the window starts when that step is scheduled, not when the enquiry arrived.
Documents run on a parallel clock. A shipment to a market that requires a certificate of origin, a safety data sheet in a specific format or a third-party certificate will not move on the strength of the commercial documents alone. Ask for the document list before the order is confirmed, so that the lead time quoted includes it.
What the quotation needs
- The product and grade: taurine, crystalline, with the mesh and the source route if either is specified.
- The assay basis and method: dried basis, HPLC or titration, as written in the specification.
- The quantity and the pack: 1 kg pouches, 25 kg drums, or a mix, with the number of each.
- The destination and the delivery term, so that freight and documents are quoted on the same basis.
- The documentation required: COA, specification, SDS, allergen and origin statements, route declaration.
- Any additional test: third-party assay, ion chromatography, ICP-MS, or a sample for the buyer's laboratory.
Six lines is enough to quote and enough to compare two quotations. A quotation that names only “taurine 99%” and a quantity is not comparable with one that names a grade, a basis and a pack, because the two may not describe the same drum.
Samples
A sample should come from the lot that will be offered, not from a separate sample stock. Ask for the lot number on the sample bag and on the certificate, and confirm that the sample was drawn before the pack was sealed rather than scooped from an opened drum. The quantity should be enough for the trial plus a retained portion; the buyer's laboratory will need both.
A sample is also the right moment to test the things a certificate cannot show: how the powder flows, how fast it dissolves, whether it cakes after a week on the bench, and whether the colour matches the previous lot. Those observations take a week and avoid a rejected drum.
Where the terms stop
Commercial terms are quotation-only: this page describes the pack, the minimum and the lead time, and the quotation carries the rest. The minimum applies per grade and per pack; a mixed order is quoted line by line. The lead time is a commitment from confirmation, not from enquiry, and it assumes the specification that was quoted.
Three boundaries are worth writing into the purchase order. The specification is the release document, so a change to the mesh, the ash limit or the route is a new specification and a new quotation. The certificate travels with the lot, so the lot number on the COA, the pack and the invoice should match. And a route claim is only a claim if it is documented; if the label says fermentation-derived, the order should require a declaration, not an assumption.
The release tests are described on the COA page, the pack and moisture questions on the stability page, and the documents a destination may ask for on the compliance page. The product page carries the specification, and MOQ and lead time are defined in the glossary.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation