Amino Acids · Core range

Taurine

C₂H₇NO₃S · CAS 107-35-7 · 2-aminoethanesulfonic acid, crystalline

Taurine specified at 98.5–101.5% on the dried basis, for capsules, sticks and sports powders where the assay basis and the impurity panel decide the grade.

Assay (dried basis)
98.5–101.5%
Minimum order
1 kg
Indicative lead time
1–7 days
Standard packing
1 kg foil pouch25 kg fiber drum

Specification

What the certificate will report

Assay (dried basis)98.5–101.5% (HPLC or titration)
AppearanceWhite crystalline powder
IdentificationIR conforms
Loss on drying≤0.3%
Residue on ignition≤0.1%
Chloride≤0.05%
Sulfate≤0.03%
Iron≤30 ppm
Heavy metalsPb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg
Particle size20–200 mesh
MicrobiologyAPC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent
Chemical formulaC₂H₇NO₃S
CAS107-35-7
Marker setTaurine (98.5–101.5%, dried basis)
AppearanceWhite crystalline powder
SolubilityFreely soluble in water; the 5% solution is acidic (pH 4.0–6.0).

Primary method HPLC and titration — the method behind each figure matters as much as the figure. How the COA is built →

What to confirm before ordering

  • Confirm the assay basis: dried, as-is or anhydrous. The same lot can look different against each basis.
  • Ask for chloride, sulfate and residue on ignition; a high ash figure is the usual sign of an inexpensive grade.
  • The source route (fermentation or chemical synthesis) is not always on the certificate; ask for it if the label claims a route.
  • Taurine use in food supplements is market-specific; confirm the destination rule before the label is designed.

Buyer questions

Practical answers

What is Taurine specified to?

Assay (dried basis): 98.5–101.5% (HPLC or titration). The full specification adds Appearance, Identification, Loss on drying, Residue on ignition, Chloride and the contaminant panel. Every figure on the batch COA is reported with the method used to produce it.

Is the taurine fermented or chemically synthesised?

The certificate does not always state the route. If the label claims a route, ask for the source statement before the order; the grade page explains what the route changes in the impurity profile and the documentation.

Which dosage forms does this grade fit?

Capsules and tablets, Powder sticks and drink mixes, Sports and energy powders, Functional beverages. The grade is selected against the dosage form and the target dose: capsule fill and tablet flow depend on bulk density and particle size, while a stick pack or gummy depends on dissolution and taste.

Which documents are supplied with the batch?

A batch-specific COA, TDS, SDS, allergen and GMO statements, an origin record and a residual-solvent statement. Third-party heavy-metal or microbiological reports can be arranged, and the specification comparison is issued before the first order.

What is the minimum order and lead time?

1 kg minimum, packed in a 1 kg foil pouch from a released lot; 25 kg fiber drums are available as quantities scale. 1–7 days after specification and order confirmation. Samples are typically 100–500 g and carry the COA of the lot they were drawn from.

Documentation

Released with every lot

  • Batch-specific certificate of analysis against the agreed specification
  • Technical data sheet with form, CAS or species, carrier, storage and packing
  • Safety data sheet in the 16-section format
  • Allergen, GMO and origin statements signed for the batch
  • Residual-solvent statement for the crystallisation system
  • Specification comparison against the specification you sent

What this page does not claim

Taurine is sold as an ingredient powder. No therapeutic or disease claim is made here, and no finished dosage form is offered. In the EU, claims for the nutrient or ingredient are restricted to the authorised list; in the US, structure/function statements are the responsibility of the brand that makes them and require substantiation. We publish specification, method, form and documents — that is the boundary of what we write.

Next step

Send the spec. We will confirm the form.

A competitor COA, a label claim or a target dose is enough to start. We reply with the grade we can release, the documents behind it and the questions we still need answered.