01 COA & batch testing

What the COA for L-tryptophan actually contains

Technical document 01 · Reviewed 2026-11-19 · L-Tryptophan

On this page
  1. The certificate as a test report
  2. What the assay, the drying basis and the rotation measure
  3. Release limit versus batch result
  4. What moves between batches
  5. When to order an outside test
  6. What to compare between suppliers

The certificate for an L-tryptophan lot reports appearance, identity by IR and the ninhydrin reaction, assay by HPLC on the dried basis, specific rotation, loss on drying, residue on ignition, pH of a 1% solution, the related-substance profile, particle size, heavy metals and microbiology. Each row should carry the method and the release limit, not only a number. The ranges here are the catalog specification; the batch COA confirms one drum. The two figures that carry the most weight are the drying basis behind the assay and the rotation that separates the L form from the D and DL forms.

In one line

The assay measures how much tryptophan is in the drum; the drying basis, the rotation and the related-substance panel say what that number means.

The certificate as a test report

A certificate is useful when it can be audited line by line: what was measured, with which method, against which limit it was released. A page that lists appearance, assay and “conforms” answers none of the identity questions an amino acid raises.

Identity, assay and physical tests · L-tryptophan
ParameterMethodRelease limit
AppearanceVisualWhite to off-white crystalline powder
IdentificationIR and ninhydrin reactionConforms to reference
AssayHPLC, UV detection, external standard98.5–101.5% on the dried basis
Specific rotationPolarimetry, 589 nm−29.4° to −32.8° on the dried basis
Loss on dryingGravimetric≤0.5%
Residue on ignitionGravimetric≤0.1%
pH (1% solution)Potentiometry5.5–7.0
Related substancesChromatographic, stated on the COAIndividual and total reported; limits agreed in the specification
Particle size, contaminants and microbiology
ParameterMethodRelease limit
Particle sizeSieve analysis≥95% through 40 mesh
Heavy metalsICP-MSPb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg
MicrobiologyPlate count and absence testsAPC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent

What the assay, the drying basis and the rotation measure

The assay is a reversed-phase separation with UV detection against an external standard. The indole ring absorbs near 280 nm, so the detector sees tryptophan and any indole-bearing impurity at the same wavelength — which is why the assay peak needs the related-substance panel beside it. A co-eluting species can sit inside the main peak and leave the percentage inside the window.

“Dried basis” means the result is corrected for the water the lot carries. Convert with as-is = dried × (100 − LOD) ÷ 100. A result of 98.5% dried with 0.4% loss on drying converts to 98.1% as sold; 101.5% dried converts to 101.1%. Because the catalog caps loss on drying at 0.5%, the gap between the bases is at most about half a percentage point — small, but enough to move a lot across the lower limit when the two sides disagree. The certificate should state the drying temperature and time.

Specific rotation is measured in water at the sodium D line: [α] = observed rotation ÷ (path in dm × concentration in g/mL). At 1 g per 100 mL and a 1 dm cell, a value near −31° gives an observed rotation of only −0.3°, so temperature, incomplete dissolution near the solubility limit and the cell all matter. A rotation without its conditions cannot be repeated.

pH of a 1% solution is a process check, not an identity test: the window 5.5–7.0 spans the isoelectric point at 5.9, so a near-neutral reading is expected, and a shift towards acid or alkali points to residual acid or base.

Release limit versus batch result

The release limit is the acceptance boundary; the batch result is what the laboratory measured. Both belong on the page, in separate columns, with the method beside them. A result column filled with the specification range is a copy of the gate, not a result, and the reader should be able to reach “passes specification” from the numbers.

Related substances usually arrive as a bare total. Ask for the individual peaks, their sum, the column, the detection wavelength and the limit of quantification. An enantiomer does not appear in that chromatogram: D-tryptophan co-elutes with the L form on a conventional reversed-phase column, so no care with the assay will detect it. The rotation is the check, and a chiral column is the confirmation.

Edge decisions need a rule. A rotation of −29.3° against a window starting at −29.4° is outside by a tenth of a degree, inside the repeatability of many polarimeters. Re-test a fresh solution and record the decision against the method's uncertainty rather than rounding the figure until it passes.

What moves between batches

Rotation moves with enantiomer content and with the measurement; loss on drying moves with the drying step and the packing room; related substances move with route and crystallisation; particle size moves with milling. None is a defect by itself, and each reads better as a trend.

Colour is the least quantitative line and often the most revealing. A cream or yellow tint on a white-to-off-white powder points to light or oxygen exposure, or to a drying step that ran hot, while the assay still passes. Ask for the batch record before rejecting the lot on appearance.

A supplier whose last five lots show rotation drifting towards the lower edge and total related substances climbing is describing a crystallisation, even when every certificate says “conforms”.

When to order an outside test

Order an independent test for a new source, a first shipment into a regulated market, a form claim the certificate does not prove, or a disputed result. The panel is targeted: chiral HPLC for the D enantiomer, LC-MS for a peak that does not belong to the standard, ICP-MS for the metals, and a plate count.

Ask the laboratory for its limit of detection and limit of quantification. “Not detected” without a limit says something about the method, not about the sample. The same applies to the assay: a report naming column, detector and basis can be compared across laboratories; a bare percentage cannot.

For a dispute, give the referee the retained sample, the certificate and the specification, and ask for the tests that separate the forms; the sample tested should be the sample retained, and the lot code should link the sample, the certificate and the drum.

What to compare between suppliers

Put six lines side by side: form and CAS; assay with its basis; rotation with its conditions; the related-substance method with individual and total figures; loss on drying; appearance and the light barrier of the pack. Two quotations that match on assay and diverge on the other five are not describing the same powder.

The second layer is traceability: the lot code should be identical on the certificate, the drum and the retained sample, and the certificate should name the manufacturer, not only the distributor. A correct certificate can still belong to a drum other than the one on the loading dock.

The catalog specification sits on the L-tryptophan product page. The form decision is on the grade page, and the tests that separate the forms are on the identity page. The release workflow is on the quality page, and the chromatographic method in the HPLC method note.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation