02 Grade comparison

L-tryptophan or DL-tryptophan: choosing a grade

Technical document 02 · Reviewed 2026-11-19 · L-Tryptophan

On this page
  1. Two decisions hide behind the word “grade”
  2. L and DL side by side
  3. What 40 mesh, 80 mesh and granulated change
  4. Fitting the form to the dosage form
  5. Writing the grade into the specification
  6. When not to switch

L-tryptophan and DL-tryptophan are different label ingredients, and the choice between them is settled by the label, the rotation and the dosage form rather than by the assay percentage. Inside the L form, the second decision is physical: 40 mesh is the standard, with milling to 80 mesh or granulation on request. This page puts the two decisions side by side and shows what changes when either is switched.

In one line

The grade is chosen by the label and the rotation, not by the assay: L and DL can both read 99% and be different materials.

Two decisions hide behind the word “grade”

In amino-acid trade, “grade” covers two unrelated choices. The first is which molecule is in the drum: the L enantiomer, the racemic DL mixture, or a different substance such as 5-HTP that shares part of the name. The second is the physical form of that molecule: crystal size, flow, dust and how fast it dissolves. A quotation that names only “tryptophan 99%” has answered neither question.

For this product the molecule is fixed as L-tryptophan, CAS 73-22-3. A request for DL is a request for a different material, with its own certificate, its own label name and its own regulatory position, and it is handled as such rather than as a variant of the same line.

The assay is a poor guide to the first decision. A racemic lot and an L lot can both sit inside a 98.5–101.5% HPLC window, because the assay counts the molecule and not its handedness. The rotation is the line that separates them, and it belongs in the specification before the first order rather than in a conversation after it.

L and DL side by side

L-tryptophan and DL-tryptophan compared
AttributeL-tryptophanDL-tryptophan
Chemical name(S)-2-amino-3-(1H-indol-3-yl)propanoic acidRacemic mixture of the two enantiomers
CAS number73-22-354-12-6
CompositionOne enantiomerApproximately equal parts D and L
Specific rotation−29.4° to −32.8° on the dried basisClose to zero
Assay by HPLC98.5–101.5% on the dried basisSame method and a similar range; read the certificate
L content per gram1.00 gAbout 0.50 g
Label nameL-tryptophanDL-tryptophan
Usual supplySupplement and food useFeed and industrial routes

Two rows carry the commercial consequences. The rotation is measured, not calculated, so it can be checked on arrival with a polarimeter and a dissolved sample. The L content is arithmetic: a gram of racemic material delivers about half a gram of the L form, so a formula written for 500 mg of L-tryptophan needs roughly twice the mass if DL is substituted. The comparison is grams of L delivered, not kilograms of powder.

What 40 mesh, 80 mesh and granulated change

The catalog form is a crystalline powder with at least 95% passing a 40 mesh sieve. That is the particle size most capsule fillers and blender feeds are set up for. Milling to 80 mesh is available on request and gives a finer powder: it dissolves faster and distributes more evenly in a small blend, and it also produces more dust, more static and a greater tendency to segregate from a coarser excipient.

Granulation is the other direction. A granulated lot flows better, generates less dust and fills a capsule or a stick pack more evenly; the granules also dissolve a little more slowly than the milled powder, which matters in a drink mix. Neither variant is better in general. The dosage form and the filling line decide, and the trial decides between them.

Bulk density and flow are not on the catalog specification. If the filler needs a number, ask for the bulk density and the angle of repose on the lot being offered, and run a fill trial before the purchase order rather than after it. Particle size is described in the particle-size glossary note.

Fitting the form to the dosage form

Capsules and tablets take the 40 mesh powder directly. A tablet at a gram dose is a large tablet, and the granulated form gives the press better flow; the compaction trial decides whether a binder or a larger tool is needed. Capsules are more forgiving, but a fine milled powder can bridge in the hopper and slow the fill.

Powder sticks and drink mixes are the harder case, because the dose has to dissolve. L-tryptophan is sparingly soluble — roughly 11 g per litre of water at room temperature — so a 1 g stick pack in 100 mL sits close to saturation and may leave a fine suspension rather than a clear drink. A larger volume, a granulated form or a split dose each solve part of that; the formulation trial should be run at the real volume, not in a beaker of warm water.

The physical form also changes the packing decision: a fine milled powder holds more air and settles differently in a 1 kg pouch, which affects the net weight check.

Writing the grade into the specification

A grade is only real when it is written down. The specification should name L-tryptophan and CAS 73-22-3, give the assay by HPLC on the dried basis, state the specific rotation with its solvent, concentration and temperature, set the related-substance limits with the method, cap loss on drying at 0.5%, and fix the particle size as at least 95% through 40 mesh — or the milled or granulated variant that was ordered.

Two lines are often left out and should not be. The rotation is the only line that proves the L form on a routine basis, and the related-substance limits are what stop a reworked lot from entering as new material. The pack belongs in the same document: a foil pouch or an opaque drum, because the material is light-sensitive and a clear bag undoes the specification in a warehouse window.

The certificate for a lot is described on the COA page, and the tests that separate the forms are on the identity page.

When not to switch

Do not switch L to DL to close a cost gap. The label has to name the form that is in the drum, the file has to match the label, and a formula written for the L form needs about twice the mass of the racemic material to deliver the same amount — a saving on the invoice is not a saving in the formula.

Do not switch if the artwork, the specification and the customer's approved sample all say L-tryptophan. Changing the molecule means a new specification revision, a new label and a new stability question, and that work is larger than the difference on the invoice that prompted it.

Do not accept a DL certificate without a rotation, and do not mill to 80 mesh without a fill or blend trial. Both are small changes on paper and measurable ones on the line. The head-to-head comparison of the two molecules is on the L versus DL page; the market rules that follow the name are on the compliance page, and the catalog specification is on the product page.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation