06 Identity & adulteration

How we prove an L-threonine lot is the right stereoisomer

Technical document 06 · Reviewed 2026-11-19 · L-Threonine

On this page
  1. The identity layers
  2. The ratio check: nitrogen, rotation and the allo pair
  3. The solid state and X-ray diffraction
  4. What substitution looks like
  5. How to write the identity into the specification
  6. Five questions to put to a supplier

An L-threonine lot is the named material only when four identity lines agree: the record names L-threonine and CAS 72-19-5, infrared and HPLC show the threonine molecule, specific rotation and chiral HPLC assign the L configuration, and an achiral HPLC or NMR check covers the allo diastereomer. The assay and the mass balance then have to close; the assay alone cannot do it, because serine, allo-threonine and D-threonine can all lift a non-specific assay.

In one line

The record names the material, the chromatogram separates it from serine and allo-threonine, the rotation fixes the L form, and the mass balance closes the assay.

The identity layers

A certificate becomes identity evidence only when the layers agree on the same lot. Work from the paper record to the instrument, then to the configuration, then to the powder.

Identity layers for L-threonine and what each one misses
LayerQuestionTestWhat it proves
RecordWhat the lot is meant to beName, CAS 72-19-5, formula, lot codePaperwork only
MoleculeIs the amino acid threonine?Infrared, HPLC retention, LC-MSThe molecule, not its stereochemistry
ConfigurationIs it the L enantiomer?Specific rotation, chiral HPLCThe L form, not the allo fraction
DiastereomerIs allo-threonine absent?Achiral HPLC, NMRThe second stereocentre
Mass balanceIs the powder diluted?Assay, loss on drying, residueConsistency of the numbers

A certificate that names the material and reports 99% has proved the record and maybe the assay; it has not proved the configuration or the allo fraction. Start with the assay and you are looking at the one number compatible with several failures.

The ratio check: nitrogen, rotation and the allo pair

Two ratios are worth calculating. The first is nitrogen content: threonine is 11.76% nitrogen and serine 13.33%. A serine cut raises the nitrogen figure in proportion; a D or allo cut leaves it unchanged. Kjeldahl or CHN is a screen, not an identity test, because the 6.25 factor used for protein is not the factor for a pure amino acid.

The second is the rotation, which is a mass-weighted ratio. L-threonine is about -28° in water, L-serine about -6.8°, L-allo-threonine about +8° to +10° and D-threonine about +28°. A serine, D or allo fraction pulls the reading toward zero. The catalog window -26.5° to -29.0° catches a large cut, not a small one; it does not replace the chromatogram.

The ratio of allo-threonine to L-threonine is the related-substance result. The catalog does not set a limit, so agree one and report it with the detection limit. A result of “allo-threonine not detected” without a limit describes the method, not the sample.

The solid state and X-ray diffraction

X-ray diffraction reads the crystal lattice. A crystalline L-threonine lot gives a pattern that can be compared with a reference; the pattern can separate a crystalline material from an amorphous blend or a different solid form. It is not a purity assay and it does not measure the enantiomer.

Enantiomers share a powder pattern, so XRD cannot tell L-threonine from D-threonine. Diastereomers have different crystal structures, so L-threonine and L-allo-threonine can give different patterns if the references are available. That makes XRD a useful solid-state check for the allo question, not a routine release test. Ask for the reference pattern and the detection limit before reading a “match” statement.

What substitution looks like

Substitution routes for L-threonine and the test that catches each
AdulterantWhat it doesSignalTest
L-serineLower molecular weight; higher nitrogenSecond peak; nitrogen above 11.76%HPLC, LC-MS, IR, CHN
L-allo-threonineSame mass and nitrogen; different configuration at C3Rotation shifts positive; separate peakAchiral HPLC, NMR, rotation
D-threonine or DLSame mass and nitrogen; opposite configuration at C2Rotation moves toward zeroChiral HPLC, rotation
Glycine or alanineDifferent mass and retentionExtra peak; molecular ion differsHPLC, LC-MS, IR
Dilution or moistureLowers assay; raises loss on dryingMass balance does not closeAssay, loss on drying, residue

Serine is the substitution a non-specific assay misses most easily: both are white, water-soluble and have one carboxyl and one amino group. The HPLC method has to separate them, and the certificate has to show the separation. The allo form is the substitution a rotation-only screen can miss; the achiral HPLC or NMR is the direct check.

How to write the identity into the specification

  • “L-threonine, CAS 72-19-5, C4H9NO3, (2S,3R)-2-amino-3-hydroxybutanoic acid.”
  • “Assay 98.5–101.5% by HPLC on the dried basis; loss on drying ≤0.5%.”
  • “Identification by infrared and HPLC; report the chromatogram, the derivatisation and the detector.”
  • “Specific rotation -26.5° to -29.0° on the dried basis, with solvent, concentration and temperature.”
  • “Allo-threonine by achiral HPLC: report the result and the limit agreed.”
  • “D-threonine by chiral HPLC where the risk assessment requires it.”
  • “Particle size ≥95% through 40 mesh; heavy metals and microbiology as listed.”

Three clauses carry the weight. “L-threonine” excludes the DL and allo forms. “Dried basis” blocks a silent water correction. The allo and D lines belong in the specification because an unwritten limit disappears when the supplier changes.

Five questions to put to a supplier

  1. Do the certificate and the pack name L-threonine, CAS 72-19-5, and the (2S,3R) configuration?
  2. Which HPLC method and detection mode released the lot, and can you send the chromatogram and the peak purity?
  3. What is the allo-threonine result, and what limit applies?
  4. What rotation did this lot give, in which solvent, at what concentration and temperature, and on which basis?
  5. Will you accept a joint re-test on the retained sample if the lot is disputed?

Five direct answers amount to an identity file. A single assay percentage does not. The certificate that should carry those answers is described on the COA page; the forms are compared on the grade page; the comparison with serine is on L-threonine vs L-serine. The product hub carries the catalog specification, the separation is explained in the HPLC method note, and assay is defined in the glossary.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation