Food grade, feed grade or DL: choosing an L-threonine grade
L-threonine is offered as food and supplement grade, as feed grade, as the racemic DL form and as the allo diastereomer. Only the first is the material specified on this page. The grade changes the documentation, the stereochemistry and the label before it changes the assay.
Grade in L-threonine is a decision about end use, stereochemistry and documentation, not a higher purity number.
Why the form is the grade
Purity and grade are separate questions. A 99% feed-grade lot and a 99% food-grade lot can share an assay and still differ in the contaminant panel, the documentation and the intended use. The DL form and the allo form are not grades of the same substance: they have different stereochemistry, different CAS numbers and different identity tests. Grade in this range means form, end use and file.
The label follows the grade. A panel that says L-threonine describes the L amino acid; a panel that says DL-threonine describes the racemate; a feed label follows feed rules and does not become a supplement label because the powder is the same colour. A drum change without a label change is a labelling defect, not a grade upgrade.
The grades and related forms side by side
| Form | Configuration | CAS | Assay and rotation | What it is for |
|---|---|---|---|---|
| Food and supplement grade | (2S,3R) | 72-19-5 | 98.5–101.5% dried basis; -26.5° to -29.0° | Capsules, tablets and powder blends |
| Feed grade | (2S,3R) | 72-19-5 | Feed-grade assay and feed dossier; rotation conforms | Animal nutrition |
| DL-threonine | Racemic: (2S,3R) and (2R,3S) | 80-68-2 | Racemic; rotation near zero | Reference and non-stereospecific work |
| L-allo-threonine | (2S,3S) | 28954-12-3 | Reference grade; about +8° to +10° in water | Reference standard and impurity marker |
The first two rows share a molecule and a CAS number; the difference is the file and the end use. The last two rows are different substances. A certificate that says “threonine” without the configuration has not named which row is being bought.
Mesh, flow and the physical grade
Food and supplement grade is a white crystalline powder, ≥95% through 40 mesh, with granulation on request. The mesh is a specification line, not a packing choice: a finer powder flows differently, dusts more and fills a capsule at a different weight. A granulated grade flows better but dissolves more slowly. Feed grade may be supplied at a different mesh or as granules; its physical specification belongs to the feed dossier and does not transfer to a supplement.
Threonine dissolves in water and the solution is neutral; a 1% solution sits at pH 5.0–7.0. The dissolution rate depends on mesh and on the matrix. Test the grade in the intended process, not only in water. If threonine is one component of a powder blend, a mesh mismatch with the other components can segregate in a drum or on a stick line, so ask for the mesh and run a uniformity check.
The label arithmetic and the assay basis
A label that declares L-threonine needs the L form. A DL lot contains both enantiomers by definition, so it cannot be declared as L-threonine without naming the DL ingredient; the D fraction is not L-threonine. The same rule applies to a blend with L-serine: each amino acid is a separate ingredient and each amount is declared.
The assay is on the dried basis, so convert it to as-is before weighing. Take a lot at 99.0% on the dried basis with 0.3% loss on drying: it contains 98.7% as-is, so a 500 mg label claim needs 506.6 mg of powder. That is arithmetic, not a batch result; use the lot's own figures. A feed premix follows feed labelling rules, and the food specification does not transfer to it.
The grade also sets the overage question. A granulated or coarser lot may need a different fill weight to deliver the same amount, and a powder blend may lose material to dust. The weigh-up should start from the as-is assay and the mesh, not from the label claim alone.
What to write into the specification
- “L-threonine, CAS 72-19-5, C4H9NO3, (2S,3R)-2-amino-3-hydroxybutanoic acid.”
- “Food and supplement grade; assay 98.5–101.5% by HPLC on the dried basis; loss on drying ≤0.5%.”
- “Specific rotation -26.5° to -29.0° on the dried basis, with solvent, concentration and temperature.”
- “Identification by infrared and HPLC; report the allo-threonine result and the limit agreed.”
- “Particle size ≥95% through 40 mesh; granulated on request; pH 5.0–7.0 at 1%.”
- “Heavy metals and microbiology as listed; food-grade documentation with the lot.”
We supply the food and supplement grade. Feed grade, DL-threonine and L-allo-threonine are separate purchases and should not be substituted without a written change control and a label check.
When the other grade is the wrong choice
Feed grade is the wrong choice for a human supplement: the feed dossier is not a food file, and the contaminant and labelling questions are different. DL-threonine is the wrong choice when the label names L-threonine: half the material is the D enantiomer, and the label, the assay and the identity file no longer match. L-allo-threonine is a reference material or an impurity marker, not a substitute for the L form; a lot with a high allo content is a stereochemical failure, not a grade.
Granulation is the wrong choice when the process needs a fine powder for dissolution or uniformity. The mesh is part of the specification, and a change from 40 mesh to a granulated grade is a change control, not a packing note.
The catalog specification is on the L-threonine product page; the certificate lines are explained on the COA page; the stereochemistry is taken further on L-threonine vs L-serine; the tests that separate the forms are on the identity page; the market file is on the compliance page.
In this document
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation