02.1 Threonine vs serine

L-threonine vs L-serine: one methyl group, two stereocentres

Technical document 02.1 · Reviewed 2026-11-19 · L-Threonine

On this page
  1. Two hydroxyl amino acids, one carbon apart
  2. Two stereocentres against one
  3. The tests are not the same
  4. Assay methods and the detection mode
  5. Two names, two ingredients
  6. When to choose which

L-threonine and L-serine are both neutral amino acids with a hydroxyl side chain, but they are different ingredients. Threonine is 2-amino-3-hydroxybutanoic acid (C4H9NO3, 119.12 g/mol) with two stereocentres; serine is 2-amino-3-hydroxypropanoic acid (C3H7NO3, 105.09 g/mol) with one. The extra carbon changes the molecular weight, the number of stereoisomers, the identity tests and the label.

In one line

One methyl group gives threonine a second stereocentre, a different molecular weight and identity tests that serine does not need.

Two hydroxyl amino acids, one carbon apart

Both are α-amino acids with a hydroxyl side chain. The hydroxyl is not ionisable at food pH, so both are neutral and both solutions sit near pH 5–7. Threonine's side chain is -CH(OH)CH3, a secondary alcohol; serine's is -CH2OH, a primary alcohol. That is one carbon and two hydrogens more, and it raises the molecular weight by 14.03 g/mol.

L-threonine and L-serine · structure and constants
PropertyL-threonineL-serine
CAS number72-19-556-45-1
FormulaC4H9NO3C3H7NO3
Molecular weight119.12105.09
IUPAC name(2S,3R)-2-amino-3-hydroxybutanoic acid(2S)-2-amino-3-hydroxypropanoic acid
Side chain-CH(OH)CH3-CH2OH
pKa (carboxyl / amino)2.09 / 9.102.19 / 9.21
Isoelectric point5.605.68
Stereocentres21
Nitrogen content11.76%13.33%

The isoelectric points are close, so pH is not a way to tell the two apart. Nitrogen content differs by about 1.6 percentage points, and the molecular weight differs by 14 units, which LC-MS sees at a glance. Serine sits between alanine and threonine in size: removing its hydroxyl gives L-alanine, and adding a methyl to the β-carbon gives threonine. The three are easy to confuse as white powders, which is why the certificate has to name the molecule.

Two stereocentres against one

Threonine has stereocentres at C2 and C3. L-threonine is (2S,3R); the other three isomers are D-threonine (2R,3S), L-allo-threonine (2S,3S) and D-allo-threonine (2R,3R). Serine has one stereocentre at C2: L-serine is (2S), D-serine is (2R), and there is no allo form.

The allo pair are diastereomers, not enantiomers. They have different physical properties and different NMR spectra, and an achiral HPLC method can separate them. L-threonine and D-threonine are enantiomers; they behave identically on an achiral column and need rotation or chiral HPLC to separate. That is the extra identity burden that threonine carries and serine does not.

Specific rotation in water is about -28° for L-threonine, +8° to +10° for L-allo-threonine and -6.8° for L-serine in water (the sign is positive in dilute HCl). A mixture's rotation is a weighted sum, so a serine or allo fraction pulls the reading toward zero. The catalog range -26.5° to -29.0° is a gate, not proof that the allo fraction is absent.

The tests are not the same

Identity questions for L-threonine and L-serine
QuestionL-threonineL-serine
Is the amino acid the named one?Infrared, HPLC retention, LC-MS at m/z 120.1Infrared, HPLC retention, LC-MS at m/z 106.1
Is it the L enantiomer?Specific rotation and chiral HPLCSpecific rotation and chiral HPLC
Is the allo form absent?Achiral HPLC and NMRNot applicable; serine has no allo form
Is the assay specific?HPLC with derivatisation; nitrogen alone is not specificHPLC with derivatisation; nitrogen alone is not specific

Infrared distinguishes the two molecules in the fingerprint region, and it can distinguish L-threonine from L-allo-threonine because diastereomers have different spectra. It cannot distinguish L-threonine from D-threonine. HPLC retention separates threonine from serine if the method is designed for it; a method that integrates one peak and calls it threonine has not shown the separation. LC-MS confirms the molecular weight: the protonated threonine ion is at m/z 120.1 and the serine ion at m/z 106.1.

A titration or a Kjeldahl nitrogen result cannot tell them apart, because both have one carboxyl group and one amino group. The nitrogen figure differs, but a nitrogen result is a screen, not an identity test.

Assay methods and the detection mode

Neither amino acid has a strong ultraviolet chromophore, so an HPLC assay usually starts with derivatisation. Ortho-phthalaldehyde, FMOC or AQC chemistry with ultraviolet or fluorescence detection is the common route; LC-MS/MS is the alternative. An ion-exchange amino acid analyser with ninhydrin is another valid method. The certificate should name the reagent and the detector, not only the word “HPLC”.

The assay basis matters as much as the method. A 98.5–101.5% result on the dried basis is not 98.5–101.5% as-is; the loss on drying, ≤0.5%, is the difference. The serine specification has its own range and basis, and the threonine range should not be carried across to it.

A method that separates threonine from serine is also the method that can reveal a substitution. Ask for the chromatogram and the peak purity, not only the percentage. That is the evidence a buyer needs when a lot is disputed, and it is the reason the method belongs in the specification rather than in a side note.

Two names, two ingredients

L-threonine and L-serine are separate ingredients. A label that names one cannot be satisfied by the other, and a blend that contains both must declare both amounts. In the EU, the ingredient list names each amino acid; in the US, the Supplement Facts panel lists each dietary ingredient and its amount per serving. The exact format depends on the market and the product.

The stereochemistry is part of the name. “L-threonine” is the ingredient; a DL-threonine lot is not a substitute, and L-allo-threonine is not a grade of either. For serine, “L-serine” is the commercial form. A specification that says only “threonine” leaves the configuration open.

The dose arithmetic follows the form. If a formula uses both, the sum is not a single “hydroxyl amino acid” figure; each is weighed and declared on its own. If a claim names one, the evidence has to be for that ingredient, not for the pair.

When to choose which

Choose L-threonine when the label names threonine, the formula is built on the essential amino acid, or the specification calls for the (2S,3R) form. Choose L-serine when the label names serine and the formula is built on it. The two are not interchangeable by weight, by assay or by label.

If the formula uses both, write both into the specification, test both and declare both. A supplier who offers “hydroxyl amino acids” as a category has not specified either ingredient.

The decision is a label and specification decision, not a purity comparison. The certificate, the specification and the label should use the same name, the same CAS number and the same stereochemistry. The catalog specification is on the L-threonine product page; the forms are compared on the grade page; the identity tests are on the identity page; the analytical methods are indexed under methods; the release workflow is on the quality page.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation