02.1 Food vs technical

Food-grade vs technical-grade glycine: what the label cannot see

Technical document 02.1 · Reviewed 2026-11-18 · Glycine

On this page
  1. What the two grade names claim
  2. Two supply chains behind one molecule
  3. The documents that separate them
  4. The same assay, a different meaning
  5. Where the profiles diverge
  6. Five questions for a sourcing file
  7. What to write into the purchase order

Food-grade and technical-grade glycine can carry the same 98.5–101.5% assay and still be different materials for a supplement file. The difference is the supply chain, the test panel and the documents behind the lot, not the headline purity. A label that says glycine cannot show which chain the drum came from; the specification and the certificate have to.

In one line

The assay can be identical while the impurity profile, the microbiology and the traceability file are not; that gap is what the grade label hides.

What the two grade names claim

Food grade and technical grade are commercial descriptions, not one harmonised legal status. Food grade claims that the material is made and tested for food use and is supported by a food-safety file. Technical grade claims that the material meets an industrial specification; it says nothing about food-contact suitability, microbiology or the statements a supplement buyer needs. The same production line can supply both, with different finishing, testing and documentation.

The grade name is therefore a starting point for the file, not a conclusion. A technical-grade certificate that reports a tight assay is not evidence of food suitability, and a food-grade label without the panel behind it is a word on a quotation.

Two supply chains behind one molecule

The food chain usually runs through a producer or distributor that holds a food-safety system, issues a food-grade specification and certificate, and can supply allergen, GMO and irradiation statements. The technical chain runs through industrial distribution, where the certificate may cover assay, particle size and moisture and stop there. The two chains can meet at the same crystallisation plant, which is why the lot code and the manufacturer name matter more than the brand on the drum.

Packaging differs as well. A food-grade lot is packed in a food-contact liner and a closed unit that can be traced; a technical lot may be packed for industrial handling with less attention to the liner and the storage statement. Neither pack is automatically wrong for its own use; only one is designed for a food or supplement file.

The documents that separate them

Document set by grade
DocumentFood gradeTechnical grade
Specification with methodsExpectedMay be assay and physical only
Batch COA with lot codeExpectedExpected, but panel may be shorter
Heavy-metal panelExpectedMay be absent
MicrobiologyExpectedMay be absent
Allergen, GMO, irradiation statementsExpectedUsually absent
Food-contact packaging declarationExpectedMay be absent
Traceability from manufacturer to drumExpectedMay stop at the distributor

“May be absent” is the point of the table. It is not a statement that every technical lot is contaminated; it is a statement that the file does not answer the question. A buyer who needs the line cannot substitute a conversation for the document.

The same assay, a different meaning

The assay is a titration of the amino group on the dried basis. It measures acid–base equivalents, not the full composition. A technical lot and a food lot can both sit inside the same assay range and still differ in chloride, residue on ignition, heavy metals and microbiology. The assay is a necessary line; it is not a grade marker.

This is why a comparison that stops at the assay is misleading. Two quotations can show the same percentage and describe different materials, different test panels and different supply chains. The next lines on the certificate are the ones that decide whether the material can enter a supplement.

Where the profiles diverge

Impurity lines that can differ at the same assay
LineWhy it matters in a supplementWhat it catches
ChlorideSalt load or acid residue; dilutes active massHydrochloride, chloride salts
Residue on ignitionInorganic mass that is not glycineSodium, potassium and other salts
Heavy metalsContaminant exposure from the daily doseProcess and raw-material metals
MicrobiologyRisk in a ready-to-mix powderPoor hygiene or wet processing
Colour and odourSignals a hot dry or a reactionProcess deviation, Maillard onset

The same assay with a higher chloride or ash figure means more of the weighed powder is not glycine. The same assay with a missing micro panel means the buyer has no evidence for a line that matters in a powder stick. The same assay with a colour difference can point to a drying step that the certificate does not describe.

Five questions for a sourcing file

  1. Which grade is this lot, and which specification version and test panel apply to it?
  2. Can you send the full COA with methods, not only the assay percentage?
  3. What are the chloride, residue-on-ignition, heavy-metal and microbiology results for this lot?
  4. Is the material food-contact compliant, and are allergen, GMO and irradiation statements available?
  5. Can you trace the lot from the manufacturer to the drum and the retained sample?

Ask for the answers in writing and compare them with the certificate. A supplier who can answer the five questions has a file; a supplier who answers only the assay has a number.

What to write into the purchase order

Name the grade and the specification version, and attach the panel: assay and basis, chloride, residue on ignition, heavy metals, microbiology, particle size and the statements required. State that the certificate must carry the same lot code as the drum and that the pack must be food-contact. If the answer to any of the five questions is missing, the order is not specified yet.

Do not accept a technical grade for a food or supplement product because the assay matches. Do not accept a food-grade word without the panel. The product page carries the catalog specification; the grade page compares the physical forms; the COA page explains the test lines; the compliance page lists the market file; the quality page covers release and traceability.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation