05 Compliance

Where glycine is permitted, and what the file must show

Technical document 05 · Reviewed 2026-11-18 · Glycine

On this page
  1. Three markets, three instruments
  2. EU and UK: general food law, not a positive list
  3. US: a dietary ingredient under DSHEA
  4. Metal limits in the file
  5. The claims boundary and the label
  6. The file a buyer should hold
  7. Checklist before the first order

Glycine is a food ingredient and an amino-acid ingredient in food supplements. The EU and UK route is general food law, with member-state rules to check; the US route is DSHEA. The file has to show the form, contaminants, label and claim boundary for the market where the product is sold.

In one line

The permitted-use question is answered by the market's instrument, but the file is what proves the lot: specification, certificate, contaminants, label and claims.

Three markets, three instruments

The markets do not use the same route. The EU and UK rely on general food law, with national rules for amino acids in some member states; the US regulates glycine as a dietary ingredient under DSHEA. A specification adequate for one market is not automatically adequate for another, and a “food grade” certificate is a supplier claim, not an authorisation.

The instrument behind each market
MarketMain instrumentWhat it decides
EUGeneral food law; Directive 2002/46/EC for supplements; Regulation (EU) 2023/915 for contaminantsFood use, supplement labelling, contaminant limits
UKRetained food law; Food Information Regulations 2014; retained contaminant limitsGB food use, labelling, contaminant limits; Northern Ireland follows the EU
USFD&C Act 201(ff) (DSHEA); 21 CFR 111; 21 CFR 101.36Dietary ingredient status, cGMP, Supplement Facts

This is a sourcing reference, not legal advice; check the current text.

EU and UK: general food law, not a positive list

Glycine is an amino acid, not a vitamin or a mineral. The positive list in Annex II to Directive 2002/46/EC covers vitamin and mineral substances and forms; it does not list glycine, so the supplement rules for an amino acid come from general food law plus the national rules of the member state where the product is sold. Check the destination before the label is finalised.

Contaminants are a separate check. As of this review, Regulation (EU) 2023/915 sets the limits for food supplements: lead 3.0 mg/kg, cadmium 1.0 mg/kg and mercury 0.10 mg/kg, with no harmonised arsenic limit. It applies to the finished product, so the ingredient specification should be tighter and should state the arsenic limit the buyer sets. Labelling follows Regulation (EU) No 1169/2011 and, for a supplement, the particulars in Directive 2002/46/EC.

In Great Britain, retained food law applies, including the Food Information Regulations 2014 and the retained contaminant limits, which carry the same lead, cadmium and mercury figures. The GB permitted-forms schedules cover vitamins and minerals, not glycine, so the amino-acid route is general food law. Northern Ireland applies the EU rules under the Windsor Framework, and the UK and EU texts can diverge after an amendment.

US: a dietary ingredient under DSHEA

Glycine is sold in the US as a dietary ingredient under section 201(ff) of the FD&C Act. The supplier file should state the basis; for an amino acid with a pre-1994 history, that is normally the pre-1994 marketing basis rather than a new dietary ingredient notification. The buyer's obligation is separate: 21 CFR 111 requires identity testing of each component on receipt.

The Supplement Facts panel is set by 21 CFR 101.36. It declares the amount of glycine per serving; there is no Daily Value for glycine, so no % Daily Value is shown. The ingredient name should match the specification and the certificate. A structure/function claim must be truthful, substantiated and accompanied by the DSHEA disclaimer, and the marketer must notify the FDA within 30 days of first marketing the claim. Disease claims are not permitted.

There is no federal maximum level for lead in dietary supplements. Many US buyers work to California's Proposition 65, where the maximum allowable dose level for lead is 0.5 µg/day and the no-significant-risk level is 15 µg/day; exposure is calculated from the daily dose, so a mg/kg figure alone does not answer the question.

Metal limits in the file

Metal limits used for a glycine supplement file
ParameterEU and GBUS
Lead3.0 mg/kg in the supplementNo federal limit; Proposition 65 exposure model
Cadmium1.0 mg/kg in the supplementNo federal limit; specification limit
Mercury0.10 mg/kg in the supplementNo federal limit; specification limit
ArsenicNo harmonised supplement limit; buyer sets oneNo federal limit; specification limit

The catalog specification carries its own limits: Pb ≤3, As ≤2, Cd ≤1 and Hg ≤0.1 mg/kg. Those are ingredient limits, not a substitute for the finished-product calculation. A finished product made with a compliant ingredient can still exceed a finished-product limit if the daily dose is high or other ingredients contribute metals.

The claims boundary and the label

In the EU and UK, nutrition and health claims are governed by Regulation (EC) No 1924/2006 and the retained equivalents, with authorised wording in Regulation (EU) No 432/2012 and the GB register. As of this review, no health claim for glycine is authorised in either register. The label should therefore describe the ingredient and its amount, not an outcome.

In the US, a structure/function claim is possible if it is truthful, not misleading, substantiated and accompanied by the DSHEA disclaimer; it still cannot be a disease claim. The same wording cannot simply be carried into the EU or UK, where the register decides what may be said. Keep the claim file separate from the specification file.

The file a buyer should hold

  • Specification naming glycine, CAS 56-40-6, the assay method and the dried basis.
  • Batch certificate with IR, titration, HPLC, LOD, residue on ignition, chloride, heavy metals, microbiology and particle size.
  • Contaminant report with the limits and the quantification levels, including an arsenic limit set by the buyer.
  • Allergen, GMO, irradiation and animal-derived input statements for the lot.
  • Food-grade declaration and food safety certification where required.
  • Label artwork with the ingredient name, the amount per portion and the market-specific particulars.
  • Claim file with the wording, the market register entry or the US substantiation, and the disclaimer where applicable.
  • Stability summary and the storage statement behind the shelf life.

The COA is one page of a larger file; the specification, the label and the claim file answer different questions.

Checklist before the first order

  1. Name the market and the member state or US state where the product will be sold.
  2. Confirm that the ingredient is described as glycine, not a blend or a derivative, on the specification and the label.
  3. Check the contaminant limits against the finished-product rule and set an arsenic limit.
  4. Check the label particulars for the market: food supplement, Supplement Facts or both.
  5. Check the claim wording against the EU or GB register, or the US substantiation file.
  6. Ask for the method, the basis and the quantification limit behind each certificate line.
  7. Keep the label, the specification and the certificate on the same version and the same lot code.

The product page carries the catalog specification; the COA page explains the test lines; the identity page covers the evidence; the EU note, UK note and US note give the detail.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation