02.1 MK-7 vs MK-4

MK-7 vs MK-4: what the menaquinone difference means for the label

Technical document 02.1 · Reviewed 2026-11-18 · Vitamin K2 MK-7

On this page
  1. Two members of one series
  2. Source and specification
  3. Dose, mass and the label arithmetic
  4. The regulatory file is form-specific
  5. What the label must say
  6. When to choose which

MK-7 and MK-4 are both menaquinones, but they are different molecules. MK-4 has the formula C31H40O2 and a molecular weight of about 444.6 g/mol; MK-7 has C46H64O2 and about 649.0 g/mol. The difference reaches the label: the ingredient name, the amount, the regulatory basis and the analytical method all refer to the specific form. A microgram of MK-4 and a microgram of MK-7 are the same mass, but they are not the same substance.

In one line

MK-4 and MK-7 are both vitamin K2, but the same microgram figure on a label describes two different molecules.

Two members of one series

The menaquinones share a methylnaphthoquinone ring and differ in the length of the polyisoprene side chain. MK-4 carries a shorter chain; MK-7 carries a longer one. The longer chain makes MK-7 the larger molecule, more lipophilic and less water-soluble, and it changes the retention time on a reversed-phase column. The shared ring is why both are described as vitamin K2; the side chain is why they are not interchangeable.

MK-4 and MK-7 side by side
PropertyMK-4MK-7
FormulaC31H40O2C46H64O2
Molecular weightAbout 444.6 g/molAbout 649.0 g/mol
Side chainShorter polyisoprene chainLonger polyisoprene chain
EU novel-food entryNot the MK-7 entry; separate basis neededVitamin K2 (menaquinone) entry
Common commercial formIsolated materialIsolated, 1% powder or oil suspension

The table is a chemistry comparison, not a ranking. The formula and the molecular weight are fixed; the commercial form is not. A supplier can offer MK-7 as a 1% spray-dried powder on a carrier, while MK-4 is usually supplied as an isolated material that is formulated by the buyer.

Source and specification

The EU entry for vitamin K2 (menaquinone) is written around MK-7. The synthetic specification is 97–102% menaquinone-7, at least 92% all-trans, no more than 6.0% cis isomers and no more than 2.0% other impurities; the microbiological route names a Bacillus source, including Bacillus subtilis ssp. natto, and carries its own specification. That entry is the reference for an MK-7 ingredient, not for MK-4.

MK-4 is generally supplied as a synthetic ingredient. Its specification has to be written for MK-4: identity, assay, related substances and the form. The source and the specification have to match, because a certificate for MK-7 cannot support an MK-4 label, and a certificate that says only "vitamin K2" does not say which homologue was measured.

Dose, mass and the label arithmetic

Both forms are declared on the label as vitamin K in micrograms. The number is a mass of the declared menaquinone, not a form-neutral "K2" unit. There is no official conversion factor that turns a microgram of MK-4 into a microgram of MK-7. The two figures describe the same mass of two different molecules, with different molecular weights and different molar amounts.

This matters when a formula is transferred. A label that declares 100 µg of MK-7 cannot be matched by 100 µg of MK-4 and called equivalent, because the ingredient named on the label has changed. If the label is mass-based, the mass has to be the mass of the named form. The vitamin K nutrient reference value is used to calculate the percentage contribution, but it does not make the two forms interchangeable.

What a label declaration refers to
Label lineWhat it namesWhat it does not say
Vitamin K (as menaquinone-7) 100 µg100 µg of MK-7Anything about MK-4
Vitamin K (as menaquinone-4) 100 µg100 µg of MK-4Anything about MK-7
Vitamin K2 100 µgA form that still has to be namedWhich menaquinone is present

The regulatory file is form-specific

In the EU, the Union list entry in Regulation (EU) 2017/2470 is the reference for the MK-7 ingredient, and the labelling designation it sets is "Menaquinone" or "Vitamin K2". The entry does not make MK-4 a synonym. An MK-4 ingredient needs its own basis in the vitamin and food-supplement rules, and the current Annex II and novel-food position for that specific material should be checked before the label is written.

In the US, both forms can be sold as dietary ingredients, but the basis is ingredient-specific: the supplier should state whether the material was marketed before 15 October 1994 or is supported by a new dietary ingredient notification. In the UK, the retained novel-food list and the food-supplement rules have to be checked for the form being sold. A market file for MK-7 is not a market file for MK-4.

What the label must say

The ingredient list has to name the form that is actually in the product. "Vitamin K2" alone is not enough when the source is declared elsewhere, and "MK-7" is not a synonym for every menaquinone. In the EU, the permitted designation for the MK-7 novel food is "Menaquinone" or "Vitamin K2"; the brand still has to make the ingredient list consistent with the form. In the US, the Supplement Facts panel names the source in parentheses, for example "Vitamin K (as menaquinone-7)" or "Vitamin K (as menaquinone-4)".

The carrier and the concentration belong on the specification and the certificate, not in the ingredient name. A 1% MK-7 powder is declared by the vitamin K it delivers, not by the powder weight. A label that says "MK-7" while the certificate reports MK-4 is a labelling defect before it is a quality defect.

When to choose which

Choose on the dosage form, the label, the market file and the analytical method, not on the generic phrase "vitamin K2". MK-7 is the form this catalog supplies as a 1% spray-dried powder, with an oil suspension on request; it fits a label that names menaquinone-7 and a market file built on the MK-7 entry. MK-4 is a separate ingredient with its own specification, its own certificate and its own label wording; it is the right choice only when the label and the market file already specify MK-4.

A substitution in either direction changes the label, the specification and the regulatory file. If a brand wants to switch forms, the change should be handled as a new product, not as a supplier swap. The product page gives the MK-7 specification; the grade page compares the MK-7 forms; the compliance page sets out the market checks; the identity page shows how the form is proved. The EU entry is summarised in the EU regulatory note.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation