02.1 Oil vs powder

Vitamin D3 oil vs spray-dried powder: carrier, overage and the label

Technical document 02.1 · Reviewed 2026-11-20 · Vitamin D3 Oil

On this page
  1. The carrier is the difference
  2. The same dose in two masses
  3. The overage is a formula decision
  4. What the label has to declare
  5. Handling follows the form
  6. When to choose the oil and when the powder

The oil and the spray-dried powder carry the same cholecalciferol but not the same mass, carrier or label. The oil is 1.0–1.1 MIU/g; the spray-dried powder on the D3 page is 100,000 IU/g, so the oil is about ten times the potency per gram. That difference decides the fill weight, the carrier declaration and how much overage the formula needs.

In one line

Oil and powder are the same molecule at different concentrations and in different carriers, so the switch changes the fill weight, the label and the stability risk together.

The carrier is the difference

Both forms are mostly carrier. At 1.0 MIU/g the cholecalciferol is about 2.5% of the oil, so the other 97.5% is the carrier and the antioxidant package. The 100,000 IU/g powder is 0.25% cholecalciferol; the remaining mass is carrier and a little moisture. The carrier is not an inert detail: it is what the label declares, what the process handles and what the stability file protects.

The oil carrier is a food-grade lipid, usually a triglyceride oil, named on the specification. It is the fill itself in a softgel or an oil blend, and it must be miscible with the other oils in the formula. The powder carrier is a solid, declared on the sibling specification as starch, gum arabic or maltodextrin; it makes the vitamin free-flowing and water-dispersible, which is what a tablet, a hard capsule or a stick pack needs.

The allergen question follows the carrier, not the vitamin. If the oil carrier is a soybean oil, the allergen declaration follows it in the EU and the US; a powder whose carrier is a starch or gum does not inherit that declaration, but it has its own source statement. Ask which carrier is in the lot and read the ingredient list against it.

The same dose in two masses

One microgram of cholecalciferol is 40 IU, so 400 IU is 10 µg and 10,000 IU is 250 µg. The concentrate is weighed by the milligram, while the powder is weighed by the tens of milligrams. The table shows what the same label dose costs in mass on each side.

The same dose in oil and in the 100,000 IU/g powder
Label doseMicrogramsOil at 1.0 MIU/gPowder at 100,000 IU/g
400 IU10 µg0.4 mg4 mg
1,000 IU25 µg1 mg10 mg
5,000 IU125 µg5 mg50 mg
10,000 IU250 µg10 mg100 mg

A softgel fill is much larger than one milligram, so the rest of the fill is carrier oil chosen for the shell and the process. The oil is therefore a concentrate that is diluted at the filling step, not a fill on its own. The powder needs no such dilution for a 10 mg dose, but a 1,000 IU stick pack built on it is mostly carrier too, and the carrier has to be declared in the same way.

The overage is a formula decision

The catalog range of 1.0–1.1 MIU/g gives a formulator up to 10% more IU per gram at the top of the range. That is a specification tolerance, not an overage. The overage is the extra vitamin added to the finished formula so the label claim is still met at the end of the shelf life, and it is justified by the stability curve for the pack.

Do not double count the two. If the master formula is calculated at 1.0 MIU/g and the lot assays at 1.1 MIU/g, the batch already carries 10% more than the calculation; a further 10% overage on top gives about 21% over the target at release. The release potency, the label claim and the stability loss have to be written into the same calculation.

The failure routes differ. Oil loses potency through oxidation, and the peroxide value is the early warning; powder loses potency through light exposure and moisture pickup, and the loss on drying is the early warning. An overage taken from a powder stability file does not transfer to an oil, and the reverse is also true. The overage is a finished-product decision, and it never repairs a pack that lets light or oxygen in.

What the label has to declare

The label names the vitamin, not the concentrate. In the EU, the ingredient is declared as vitamin D3 or cholecalciferol, with the amount per daily portion in micrograms and as a percentage of the 5 µg reference intake. In the US, the Supplement Facts panel declares vitamin D3 (cholecalciferol) in micrograms and as a percentage of the 20 µg Daily Value. The carrier and the antioxidant appear in the ingredients list in both markets.

Label elements for the two forms
ElementEUUS
Nutrient nameVitamin D3 or cholecalciferolVitamin D3 (cholecalciferol)
Amount and referenceµg per daily portion; % of 5 µg NRVµg per serving; % of 20 µg Daily Value
CarrierIn the ingredients list; allergen statement where requiredIn the ingredients list; allergen statement where required
Dispersion wordingOnly if the form supports itOnly if the form supports it

The oil is not water-dispersible; a “water-dispersible” claim needs the powder or an emulsified oil with its own stability data. A label written for one form does not transfer to the other, even when the IU per unit is the same.

Handling follows the form

The oil goes into an amber bottle because light and oxygen are its failure route; the powder goes into a foil pouch because moisture and light are its failure route. A softgel protects the fill with an opaque shell and a low-oxygen environment; a stick pack protects the powder with a foil barrier and a sealed seam. Neither pack can be swapped for the other without a new stability file.

At the bench, the oil is warmed gently and mixed before weighing, and the bottle is closed between uses; the powder is kept dry and resealed, and the pouch is not left open in a humid room. Both are sensitive to heat, and neither should be stored in a hot loading bay. The oil stability page carries the full protocol.

When to choose the oil and when the powder

Choose the oil for a softgel, an oil blend or a lipid-based fill, where a liquid carrier is needed and the concentrate can be diluted in the fill. Choose the powder for a tablet, a hard capsule, a stick pack or a dry blend, where a free-flowing, water-dispersible solid is needed and the carrier can be declared on the label.

A switch is a new specification, a new label and a new stability file, not a unit conversion. The oil product page carries the oil specification; the spray-dried powder page carries the powder; the grades page places the two in the wider range; the compliance page covers the market file; the methods index explains the assays; the quality page describes release.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation