The regulatory file for vitamin D3 oil
Vitamin D3 oil is cholecalciferol carried in a food-grade oil, so the regulatory file has to cover the vitamin, the carrier and the label that will declare both. The framework is set by the destination market; the buyer’s regulatory team confirms the route and the maximum level for the finished product. This page lists the documents and checks that belong in that file, not a legal opinion.
The molecule is the easy part; the file has to match the carrier, the IU declaration and the label wording to the market that will sell it.
What the file contains
Four strands make up the folder: the specification version for the oil, the lot certificate, the destination’s limits and label rules, and the change-control record for source, carrier and pack. The lot is described in the COA, the specification in the TDS, and handling in the SDS. The destination route is a separate document; none of the three establishes it.
The folder also needs the carrier and antioxidant statements, allergen and GMO declarations, the origin record and any customer-specific declaration. A missing statement should be named while the order is still a quotation, because closing it at the port is expensive. Put a dated index at the front of the folder so every revision is visible.
European Union
For the EU, the route starts with Directive 2002/46/EC on food supplements and the labelling rules of Regulation (EU) No 1169/2011. Vitamin D has a reference intake of 5 µg/day in Annex XIII, and the label declares the amount per daily portion as a percentage of that reference. The member state sets the maximum level for the finished product, so the same oil can be inside the route in one market and outside it in another.
Health claims sit under Regulation (EC) No 1924/2006 and the EU register, and contaminants under Regulation (EU) 2023/915 as amended. The tolerable upper intake level for adults is 100 µg/day in EFSA’s 2012 opinion; it is a safety reference the file may cite, not a labelling limit. Check the current consolidated texts as of this review, because the annexes and the contaminant limits are amended.
United States
In the US, the first question is whether the oil qualifies as a dietary ingredient for the intended use. The Supplement Facts panel declares vitamin D in micrograms and as a percentage of the Daily Value, which is 20 µg (800 IU) for adults and children four years and older. The supplier sets out the basis it relies on; the buyer then tests that the same basis reaches the finished product and the claim.
For a food use rather than a supplement, vitamin D3 is addressed as a food additive in 21 CFR 172.380, and the carrier oil must itself be suitable for that use. Structure/function wording is examined separately, with substantiation on file and the DSHEA disclaimer on the label. Neither the label review nor the claim review is part of the certificate.
United Kingdom
Two regimes apply inside the UK. Great Britain uses the GB food information and food-supplement rules, with the same 5 µg reference intake; Northern Ireland applies the EU framework, including Regulation (EU) No 1169/2011, under the Windsor Framework. Which regime applies follows the delivery address; the buyer’s regulatory team should note it on the order so the label and the citation can be audited later.
Contaminants and limits
Contaminants have to be judged at the finished-product level, not merely from the bottle result. Those figures are only a starting point for a supplement file; the destination’s current text and the daily dose settle the final limit. The oil is used at milligrams per unit, so its contribution is small, but the file should still show the calculation rather than assume it.
| Parameter | Catalog limit | What the file should show |
|---|---|---|
| Lead (Pb) | ≤3 mg/kg | Lot result, method and the finished-product contribution |
| Arsenic (As) | ≤2 mg/kg | Lot result, method and the agreed limit |
| Cadmium (Cd) | ≤1 mg/kg | Lot result and any category exception that applies |
| Mercury (Hg) | ≤0.1 mg/kg | Lot result and method |
| Peroxide value | ≤10.0 meq O₂/kg | A quality limit, not a regulatory one; report it beside the panel |
Claims for vitamin D3
In the EU, vitamin D claims are authorised only in the wording on the register and only when the conditions are met; examples as of this review are the maintenance of normal bones, normal muscle function and the normal function of the immune system. A claim written for a different form or a different nutrient does not transfer to this oil, and the daily-portion threshold has to be checked against the formula.
A US structure/function statement requires substantiation and the DSHEA disclaimer; disease claims are outside the route. The carrier can raise a claim of its own, which is why the allergen and composition statements belong in the same review. This site publishes the specification and makes no health claim; the brand owner’s reviewer signs off the label for the destination.
Documents for the file
The buyer’s file needs the COA with the HPLC potency in IU/g, the UV identity, the peroxide value, the metal panel and the micro count. The specification must name the carrier, the antioxidant package and the IU/g; an oil certificate and a powder certificate are not interchangeable. The source and process description, TDS, SDS, allergen and GMO statements, origin record and the stability summary for the pack on order complete the set. The identity page shows how the form and the potency are proved, and the methods index explains the tests behind each line.
Checklist before the first order
- The specification names its revision, CAS 67-97-0 and the oil form.
- The lot certificate, TDS, SDS, GMO and origin statements and the stability summary are in the folder.
- Contaminant figures have been recalculated against the finished-product dose.
- The units on the label and the claim wording have passed a destination review.
- Any change of carrier, source or pack runs through change control.
- All three documents — quotation, specification and certificate — cite one revision.
The product hub carries the catalog specification; the EU regulatory notes and the US regulatory notes collect the framework references; the quality page describes the release file.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation