02 Grade comparison

Crystalline powder, oil or dilution: choosing a vitamin D2 grade

Technical document 02 · Reviewed 2026-11-19 · Vitamin D2

On this page
  1. Why vitamin D2 is sold in more than one presentation
  2. The catalog formats side by side
  3. What the powder and the oil are like to handle
  4. Dose arithmetic and the label
  5. What to write into the specification
  6. When the other format is the wrong choice

Vitamin D2 is supplied as a white crystalline powder at 97.0–103.0% by HPLC, and the catalog also offers an oil-based format on request. The choice is set by the dose weight and the dosage form, because the pure material is far too concentrated to weigh into a single capsule. A diluted or triturated grade is a new specification, not a packing option.

In one line

The grade is chosen by the dose weight and the dosage form; the 99% crystal is a bulk material, not a capsule fill.

Why vitamin D2 is sold in more than one presentation

Ergocalciferol is a crystalline sterol. It is practically insoluble in water and soluble in oils and organic solvents, so the same molecule can be presented as a dry crystal or carried in an oil. Those are not two purities of the same grade; they are two ways of putting a very small amount of a very potent material into a dosage form.

The arithmetic explains the dilution. A 1,000 IU dose is 25 µg, or 0.025 mg, of ergocalciferol. A capsule that weighs 300 mg cannot carry 0.025 mg evenly without a premix. A 100,000 IU/g trituration puts the same 1,000 IU into 10 mg of powder. The catalog crystal is the concentrate from which such a trituration is made.

The catalog formats side by side

Crystalline vitamin D2 and the oil-based format
PropertyCrystalline powderOil-based blend
Assay basis97.0–103.0% ergocalciferol by HPLCDeclared IU or µg per gram in the oil
AppearanceWhite crystalline powderClear to pale yellow oil
SolubilitySoluble in oils and organic solvents; insoluble in waterMiscible with oils; needs an emulsifier in water
Dose handlingNeeds a premix or a diluted gradeCan be weighed and filled at low IU per gram
Usual dosage formCapsules, tablets, dry blendsSoftgels, oil drops, emulsions
Standard pack1 kg foil pouch; 25 kg fiber drumOn request
Main analytical riskIsomer profile and melting rangeOil quality and extraction recovery

The last row is the one that differs most in practice. A dry certificate is read for assay, melting range and related substances. An oil certificate also has to describe the carrier, the antioxidant and the peroxide value, because the oil is most of the product and it can fail before the vitamin does.

What the powder and the oil are like to handle

The crystal is white, free-flowing at 40 mesh and specified at loss on drying ≤0.5%. It melts at 115–118 °C, which is an identity line rather than a processing temperature. It is light-sensitive, so the bench work belongs under yellow or subdued light and the remainder goes back into the foil pouch, not into a clear jar.

The oil format is a carrier decision. Medium-chain triglycerides, sunflower oil and olive oil behave differently in softgels and in emulsions, and each has its own oxidation profile. The vitamin is protected from moisture in oil, but it is exposed to dissolved oxygen and to the carrier's peroxides. An antioxidant may be part of the formulation; it is not part of the ergocalciferol identity.

Neither format is water-soluble. An aqueous drink needs an emulsion or a water-dispersible powder, and that is a third specification with its own carrier and its own stability work.

Dose arithmetic and the label

The IU conversion is fixed: 1 µg of vitamin D2 is 40 IU. A 10 µg dose is 400 IU, 25 µg is 1,000 IU, 50 µg is 2,000 IU and 100 µg is 4,000 IU. The same figures apply to vitamin D3, which is why the IU alone does not say which molecule is in the pack.

In the US the label declares vitamin D in micrograms and may add the IU in parentheses; in the EU and the UK the declaration is in micrograms and as a percentage of the reference value. The ingredient list names ergocalciferol. A label that says only “vitamin D” leaves the form to the ingredient list, and a label that says “vitamin D3” cannot be satisfied by this material.

The pack arithmetic is worth doing once. One kilogram of the 99.0% crystal contains about 39.6 billion IU. A formulator therefore buys the crystal to make a premix, not to fill capsules from the drum. A diluted grade is specified by its IU per gram and its carrier, and the certificate reports the dilution as well as the assay.

What to write into the specification

  • “Ergocalciferol, CAS 50-14-6, C28H44O, vitamin D2.”
  • “Assay 97.0–103.0% by HPLC on the stated basis, against an ergocalciferol reference standard.”
  • “Identification by HPLC retention and UV spectrum; melting range 115–118 °C.”
  • “Loss on drying ≤0.5%; particle size ≥95% through 40 mesh.”
  • “Heavy metals and microbiology as listed; cholecalciferol screened and reported.”
  • “For a diluted grade: IU or µg per gram, carrier, and the assay of the blend.”

A specification for the crystal does not transfer to an oil blend or a trituration. Each format has its own assay basis, its own carrier and its own stability file.

When the other format is the wrong choice

The crystal is the wrong choice when the formula needs a direct oil fill or a low-dose aqueous system and the plant has no premix step. An oil blend is the wrong choice when the label declares a powder, when the capsule fill must stay dry, or when the customer's specification is written around the pure substance.

A diluted grade is the wrong choice when the label declares 99% or when the market file describes the concentrate. The dilution is a new material with a new carrier, a new assay and a new stability question, and it should be ordered as such rather than produced informally at the bench.

The product page carries the catalog specification. The D2 versus D3 comparison covers the molecule and the label; the vitamin D3 page covers the other form; the COA page shows how each figure is reported; the MOQ page covers packs and lead time; the quality page covers release.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation