02.1 Oil vs powder

Vitamin D2 oil vs powder: carrier, overage and the label

Technical document 02.1 · Reviewed 2026-11-20 · Vitamin D2 Oil

On this page
  1. What the carrier is
  2. Two concentrations, two masses
  3. Where the overage comes from
  4. What the label has to declare
  5. Handling follows the form
  6. When to choose the oil and when the powder

Vitamin D2 oil at 1.0–1.1 MIU/g and the powder forms carry the same ergocalciferol at very different concentrations. The oil is a liquid concentrate in a food-grade carrier; the catalog powder is 97.0–103.0% crystalline ergocalciferol, and a powder on carrier is diluted to an agreed IU/g. The switch changes the mass per dose, the carrier declaration, the overage calculation and the label.

In one line

The oil and the powder carry the same ergocalciferol, but the carrier changes the fill weight, the overage arithmetic and the words on the label.

What the carrier is

Both forms are mostly carrier, but the carrier is not the same material. At 1.0 MIU/g the ergocalciferol is about 2.5% of the oil, so the other 97.5% is the carrier oil and, where used, the antioxidant. The crystalline powder has no carrier at all: it is the concentrate. A powder on carrier is mostly solid carrier, with the vitamin diluted to an agreed potency.

The oil carrier is a food-grade lipid named on the specification. It is the fill itself in a softgel or an oil blend, and it has to be miscible with the other oils in the formula. The powder carrier is a solid such as a starch, gum or maltodextrin, declared on its own specification; it makes the vitamin free-flowing and water-dispersible, which is what a tablet, a hard capsule or a stick pack needs.

Allergens travel with the carrier rather than the vitamin. A soy-derived oil carrier brings its own declaration; a starch- or gum-based powder does not inherit that one, though it may carry a different source statement. Confirm the carrier for the lot and match the ingredient list to it.

Two concentrations, two masses

The IU convention is shared: one microgram of either form is 40 IU. The oil at 1.0 MIU/g carries 1,000 IU per milligram. The crystalline powder at 97.0–103.0% carries about 38.8–41.2 MIU/g, or roughly 40,000 IU per milligram. A carrier powder is diluted to the IU/g agreed for the order, so its mass per dose depends on that agreement.

The same dose in oil and in the powder forms
FormPotency1,000 IU weighsCarrier
Oil, this product1.0–1.1 MIU/gAbout 1 mgFood-grade oil, named
Crystalline powder97.0–103.0% (about 40 MIU/g)About 0.025 mgNone
Powder on carrierAgreed IU/gDepends on the agreed potencySolid carrier, declared

The oil is roughly forty times less potent per gram than the pure crystal and about ten times more potent than a 100,000 IU/g carrier powder. The smaller the weighed mass, the more the balance, the dilution step and the mixing time contribute to the error. The oil is a practical concentrate because a milligram can be weighed and dispersed; the crystal is a premix material, not a capsule fill.

Where the overage comes from

The 1.0–1.1 MIU/g window is a release tolerance, not an overage. A formulator adds extra vitamin so that the label claim survives to the end of shelf life, and the size of that addition comes from the stability curve for the chosen pack. The two numbers are often confused because both are expressed as a percentage.

The tolerance and the overage can compound. Suppose the master formula assumes 1.0 MIU/g and the released lot assays at 1.1; the batch already contains a tenth more than the calculation. Add another tenth as overage and release sits about 21% above target. Put release potency, label claim and stability loss into one calculation.

Oil and powder do not fail the same way. In oil, oxidation shows up first in the peroxide value and potency follows; in powder, light exposure and moisture pickup lead, with loss on drying as the early indicator. An overage derived from one stability file cannot be transplanted to the other, and no overage compensates for a pack that admits light or oxygen.

What the label has to declare

The label names the vitamin, not the concentrate. In the EU and the UK, the ingredient is declared as vitamin D2 or ergocalciferol, with the amount per daily portion in micrograms and as a percentage of the 5 µg reference intake. In the US, the Supplement Facts panel declares vitamin D2 (ergocalciferol) in micrograms and as a percentage of the 20 µg Daily Value; the IU may follow in parentheses. The carrier and the antioxidant appear in the ingredients list in both markets.

Label elements for the two forms
ElementEU and UKUS
Nutrient nameVitamin D2 or ergocalciferolVitamin D2 (ergocalciferol)
Amount and referenceµg per daily portion; % of 5 µg NRVµg per serving; % of 20 µg Daily Value
CarrierIn the ingredients list; allergen statement where requiredIn the ingredients list; allergen statement where required
Dispersion wordingOnly if the form supports itOnly if the form supports it

The oil does not mix with water on its own. A water-dispersible claim requires the powder, or an emulsion backed by its own stability work. Labels do not transfer between forms just because the IU per unit matches.

Handling follows the form

Packaging follows the failure route. Oil needs an amber bottle against light and oxygen; powder needs a foil pouch against moisture and light. A softgel gives the fill an opaque shell and a low-oxygen interior, while a stick pack gives the powder a foil barrier and a sealed seam. Changing pack means generating new stability data.

At the bench, the oil is warmed gently and mixed before weighing, and the bottle is closed between uses. The powder is kept dry and resealed, and the pouch is not left open in a humid room. Both are sensitive to heat, and neither belongs in a hot loading bay. The oil stability page carries the full protocol.

When to choose the oil and when the powder

Pick the oil for softgels, oil blends and lipid fills where a liquid carrier is wanted and the concentrate can be diluted into the batch. Pick the powder for tablets, hard capsules, stick packs and dry blends where a free-flowing solid is needed. Pick the crystal when the plant makes its own premix. A switch is a new specification, label and stability file, not a conversion factor.

A switch is a new specification, a new label and a new stability file, not a unit conversion. The oil product page carries the oil specification; the vitamin D2 page carries the crystalline powder; the grades page places the forms in the catalog range; the compliance page covers the market file; the methods index explains the assays; release is described on the quality page.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation