02 Grade comparison

Vitamin D2 oil grades: potency, carrier and dosage form

Technical document 02 · Reviewed 2026-11-20 · Vitamin D2 Oil

On this page
  1. Why the oil grade exists
  2. The formats side by side
  3. What the oil is like to handle
  4. Dose arithmetic and the label
  5. What to write into the specification
  6. When the oil is the wrong choice

Vitamin D2 oil is supplied at 1.0–1.1 MIU/g in a food-grade carrier oil, packed in 1 kg and 5 kg amber bottles. That is one grade in the catalog, not a range of purities: the carrier and the potency are the grade. The crystalline powder and the powder-on-carrier format are separate specifications with their own assay, pack and stability file.

In one line

The grade is the carrier plus the IU per gram: change either one and the fill weight, the label and the stability file move with it.

Why the oil grade exists

Ergocalciferol is a crystalline sterol that dissolves in oil. The oil grade exists because a 1,000 IU dose is only 25 µg of the vitamin. At 1.0 MIU/g, one gram of oil carries one million IU, so 1,000 IU is one milligram of oil. That is small enough to weigh but far too small to fill a softgel on its own; the concentrate is diluted into the rest of the fill.

The powder side works at a different scale. Crystalline ergocalciferol is specified at 97.0–103.0% and is about 40 MIU/g, so it is bought to make a premix or a trituration rather than to fill a capsule directly. A powder on a solid carrier is diluted to an agreed IU/g and declared as its own product. Three concentrations, three carriers, three specifications.

The formats side by side

Vitamin D2 formats and what one gram carries
FormatPotencyCarrierTypical use
Oil, this product1.0–1.1 MIU/g (1,000–1,100 IU/mg)Food-grade oil, named on the specificationSoftgels, oil blends
Crystalline powder97.0–103.0% (about 38.8–41.2 MIU/g)NonePremix, capsules and tablets after dilution
Powder on carrierAgreed IU/gSolid carrier, declaredDry blends, stick packs

The oil is roughly forty times less potent per gram than the pure crystal. That does not make it a lower grade. It makes the weighed amount larger, so the balance and the mixing step carry less of the total error. The crystal is the concentrate from which the other formats are built.

What the oil is like to handle

Appearance is a clear, pale yellow liquid. The oil does not dissolve in water; it mixes with fats and organic solvents and with other triglyceride oils, which is why it suits an oil blend or a softgel fill. Without an emulsifier it will not disperse in water, so a drink mix is not its natural home.

Thickness depends on the carrier and on temperature. Chilling makes the oil viscous and sometimes cloudy; warm it gently and stir before weighing, and read cloudiness as a handling effect rather than a potency result. Amber glass blocks light but does not measure, and the air space above the oil feeds oxidation after opening.

The crystalline powder has the opposite profile: white, free-flowing and specified at 40 mesh, with a melting range of 115–118 °C and a loss on drying limit of ≤0.5%. It is light-sensitive, so bench work belongs under subdued light and the remainder goes back into the foil pouch. The oil keeps the vitamin away from moisture but exposes it to dissolved oxygen and to the carrier's own peroxides.

Dose arithmetic and the label

The conversion is fixed: one microgram of vitamin D2 is 40 IU. With the 1.0 MIU/g oil, 400 IU is 10 µg and 0.4 mg of oil; 1,000 IU is 25 µg and 1 mg; 5,000 IU is 125 µg and 5 mg; 10,000 IU is 250 µg and 10 mg. The same doses in 99.0% crystalline ergocalciferol weigh about 0.010, 0.025, 0.126 and 0.253 mg.

The same label dose in oil and in crystalline ergocalciferol
Label doseMicrogramsOil at 1.0 MIU/gCrystal at 99.0%
400 IU10 µg0.4 mg0.010 mg
1,000 IU25 µg1 mg0.025 mg
5,000 IU125 µg5 mg0.126 mg
10,000 IU250 µg10 mg0.253 mg

A softgel holds far more than the milligram of concentrate, so the balance of the fill is carrier oil selected for the shell and the process. The label declares vitamin activity, not the weight of concentrate. Keep the concentrate's IU/g in the batch record so release can check the weigh-up.

Each milligram of a 1.1 MIU/g lot contains 1,100 IU. If the formula is built on 1.0 MIU/g, a unit made from that lot is 10% above the calculated activity unless the weigh-up is changed. Decide whether batches are weighed on the certificate result or on a fixed 1.0 MIU/g assumption, and write the rule into the specification.

In the EU and the UK the label declares vitamin D in micrograms per daily portion and as a percentage of the 5 µg reference intake. In the US the Supplement Facts panel uses micrograms and the 20 µg Daily Value, with the IU optional in parentheses. The ingredient list names ergocalciferol; “vitamin D” alone does not say which form is in the bottle.

What to write into the specification

  • “Ergocalciferol oil, CAS 50-14-6, C28H44O, 1.0–1.1 MIU/g by HPLC.”
  • “Carrier oil named; antioxidant package named where used; peroxide value ≤10.0 meq O₂/kg.”
  • “Identification by HPLC retention and UV spectrum against an ergocalciferol standard; state the wavelength.”
  • “Appearance clear, pale yellow oil; heavy metals and microbiology as listed.”
  • “Pack 1 kg or 5 kg amber bottle; storage condition and retest period stated.”
  • “Destination market and label units agreed before the first order.”

When the oil is the wrong choice

The oil is the wrong choice for a tablet, a hard capsule, a stick pack or a dry blend, where a liquid fill would need a carrier and an extra process step. It is also the wrong choice when the label declares a powder or when the plant has no way to weigh and dilute a milligram-scale concentrate accurately.

The crystal is the wrong choice when the formula needs a direct oil fill, and a powder on carrier is the wrong choice when the label declares the oil. A switch in either direction is a new specification, a new carrier declaration and a new stability file, not a unit conversion.

The catalog values are on the product hub; the level-four comparison takes the oil and powder forms further; the solid grade is on the vitamin D2 page; the oxidation route is on the stability page; the market file is on the compliance page; the assays are in the methods library; release is described on the quality page.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation