What the COA for vitamin D2 oil actually contains
The certificate for a vitamin D2 oil lot reports appearance, identification by HPLC and ultraviolet spectrum, potency in IU per gram, peroxide value, the heavy-metal panel and microbiology, and it should name the carrier oil. The figures below are the catalog specification for the 1.0–1.1 MIU/g oil; the batch certificate is the document that speaks for the bottle in hand.
An oil certificate has to put IU per gram, peroxide value and HPLC/UV identity on the same page, because a potency figure alone cannot separate fresh oil from oxidized oil.
The certificate as a test report
A certificate is auditable when each row carries the measurement, the method and the limit it was judged against. The identity line and the potency line answer different questions: HPLC retention and the UV spectrum say the peak is ergocalciferol, while the IU figure says how much of it sits in the carrier. A certificate that prints only the potency has measured the second question and skipped the first.
For an oil, the carrier and the antioxidant belong on the same page as the vitamin. They are most of the mass and they decide how the oil behaves in a softgel or a blend; if the carrier is not named, the certificate does not fully describe the bottle.
| Parameter | Method | Release limit |
|---|---|---|
| Appearance | Visual | Clear, pale yellow oil |
| Identification | HPLC retention and UV spectrum | Conforms to an ergocalciferol reference |
| Potency | HPLC with UV detection | 1.0–1.1 MIU/g |
| Peroxide value | Iodometric titration | ≤10.0 meq O₂/kg |
| Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg |
| Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent |
| Carrier | Specification and batch record | Named on the specification and the certificate |
IU per gram, not a percentage
Oil potency is quoted in IU per gram, not as a percentage. The IU is fixed at 40 per microgram, so a 1.0 MIU/g oil contains 25 grams of ergocalciferol in a kilogram, which is 2.5% by mass; the 1.1 MIU/g top of the range works out at 27.5 g/kg, or 2.75%. Those conversions are fixed by the unit, not by the supplier.
The oil is measured as received. There is no anhydrous basis and no loss-on-drying line, because the carrier is a liquid and the potency is already an as-is figure. The certificate should show how the HPLC result in micrograms per gram became an IU figure, name the reference standard and state the detection wavelength. A potency number without that note is harder to audit, and a number copied from a marketing sheet is not a result.
The reference standard matters. Ergocalciferol and cholecalciferol both absorb ultraviolet light near 265 nm and both use the same 40 IU per microgram convention, so an assay reported against a generic “vitamin D” standard does not establish which molecule was measured. The certificate should name an ergocalciferol standard and say whether a cholecalciferol screen was run.
Release limit versus batch result
The limit marks where acceptance stops; the result records what this lot actually contained. Keep them in separate columns and put the method beside both. A result column filled with the specification range has copied the gate instead of reporting a measurement.
| Parameter | Release limit | Result column |
|---|---|---|
| Potency | 1.0–1.1 MIU/g | A measured IU/g figure with the conversion and the standard |
| Peroxide value | ≤10.0 meq O₂/kg | A measured figure in meq O₂/kg |
| Identification | Conforms to an ergocalciferol reference | The retention time and the spectrum statement |
| Heavy metals | Per element | A measured figure in mg/kg for each element |
| Microbiology | Counts and absence | The count and the absence statement for the lot |
| Appearance | Clear, pale yellow oil | A description of the lot as received |
Peroxide value is the line that tends to fail first. A lot can sit inside the potency range and still be unusable if the carrier has begun to oxidize. Peroxide value is a quality limit rather than a regulatory one, and it belongs beside the potency rather than in a footnote.
What moves between batches
Four things move between oil lots: the potency of the concentrate, the quality of the carrier, the antioxidant package and the colour of the oil. Potency moves with weighing, dilution and the standard. Peroxide value moves with the age of the carrier, the antioxidant and the headspace in the bottle. Colour moves with the carrier lot and with exposure.
The catalog window is 1.0–1.1 MIU/g. Two compliant lots can sit at 1.02 and 1.09 MIU/g; if the formula assumes the lower figure, the second lot supplies roughly a tenth more vitamin per unit. Record the potency actually used in the weigh-up rather than rejecting a lot that is inside the agreed range.
One result near a limit carries less information than a trend across lots. Peroxide value climbing, potency drifting down or colour darkening over several deliveries points to a change in carrier supply, antioxidant or storage. The lot code on the certificate should match the bottle, the carton and the retained sample.
When to order an outside test
Independent testing is worth its cost for a new source, a first shipment into a regulated market, a disputed potency result, a peroxide value near the ceiling or a label that names D2 while the certificate stays vague. The useful panel is HPLC with a diode-array detector against an ergocalciferol standard, the ultraviolet spectrum, peroxide value, ICP-MS for the metal panel and microbiology.
Add a cholecalciferol screen when the form is in question, a fatty-acid profile by GC when the carrier is disputed, and residual solvents if the manufacturing route uses them. Ask the laboratory to state its detection limit for each screen. A “not detected” line without a limit describes the reach of the method, not the sample.
Chain of custody belongs in the same conversation. The material sent to the laboratory should be the material in the retain room, and the report should name the lot. In a dispute, give the referee those three items and ask for tests that discriminate between forms, not a second run of the same potency method.
What to compare between suppliers
Compare six fields: form and CAS number; IU/g with the method and the reference standard; carrier oil; antioxidant package; peroxide value; pack size and lot code. Two offers that agree on potency but differ on the carrier or the antioxidant are not the same oil, even when the headline number matches.
Traceability is the second layer: the certificate should identify the manufacturing site, the carrier batch and the pack that was filled. The catalog values are listed on the product hub; the solid form is on the vitamin D2 page; the oxidation route is on the stability page; the tests are explained in the methods library; release is described on the quality page.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation