02.1 HCl vs P5P

Pyridoxine HCl vs P5P: potency, solubility and the label

Technical document 02.1 · Reviewed 2026-11-18 · Vitamin B6

On this page
  1. What is actually in the drum
  2. What a milligram actually delivers
  3. Solubility and stability decide the process
  4. What the label can carry
  5. When each one is the right choice
  6. What to write when you switch

Pyridoxine hydrochloride and pyridoxal 5'-phosphate both declare vitamin B6, but they are separate substances with separate molecular weights, label names and stability profiles. The hydrochloride is 82.3% pyridoxine by mass and dissolves freely; P5P is 68.5% pyridoxine as the free acid, less soluble and more labile. A formula built on one cannot be switched to the other by changing a number on the panel.

In one line

The two forms are not interchangeable milligram for milligram: P5P carries less pyridoxine per milligram, dissolves differently and appears under a different name on the label.

What is actually in the drum

Pyridoxine hydrochloride and P5P compared as label ingredients
PropertyPyridoxine hydrochloridePyridoxal 5'-phosphate
IdentityPyridoxine hydrochloride, CAS 58-56-0Pyridoxal 5'-phosphate, CAS 54-47-7; monohydrate 41468-25-1
Formula and molecular weightC8H11NO3·HCl, 205.64 g/molC8H10NO6P, 247.14 g/mol; monohydrate 265.16 g/mol
Counter-ionChloride, 16.9–17.6%Phosphate; no chloride
Pyridoxine fraction82.3% of the salt mass68.5% of the free acid; 63.8% of the monohydrate
Assay convention99.0–101.0% on the dried basis, titrationExpressed as the phosphate form; water declared
Label namePyridoxine hydrochloridePyridoxine 5'-phosphate (EU/UK entry name); pyridoxal 5'-phosphate (US)

The pyridoxine fraction is the row that matters for the panel; the counter-ion row is the one that matters for identity. A certificate that reports “99%” without the form and the basis has not said which of these powders is in the drum.

What a milligram actually delivers

The label declares vitamin B6, not the salt. At the hydrochloride's 82.3% fraction, a 10 mg vitamin B6 claim needs 10 ÷ 0.823, or about 12.2 mg of the salt. For P5P the same 10 mg is about 14.6 mg of the free acid, or about 15.7 mg of the monohydrate. A form switch at the same milligram weight therefore changes the label claim, and a switch at the same claim changes the weigh-out.

The assay percentage does not remove that difference. A 99% hydrochloride assay is about 81.5% pyridoxine by mass, while a 99% P5P free-acid assay is about 67.8% pyridoxine. The two numbers are both “99%” and they describe different amounts of the vitamin. That is why a quotation, a specification and a label should all name the form and the basis before any percentage is compared.

The reference values sit behind the panel percentage. In the EU and the UK the nutrient reference value for vitamin B6 is 1.4 mg; in the US the daily value is 1.7 mg. Those are label references, not a dose recommendation. The overage is a separate decision, set from the loss curve of the specific form in the specific pack; an overage carried over from the hydrochloride is not evidence for P5P.

Solubility and stability decide the process

Pyridoxine hydrochloride is freely soluble in water and the 5% solution is pH 2.4–3.0. That makes it the easier form for a liquid, a stick or a gummy, where the acidity has to be balanced against the rest of the formula. In a dry capsule or tablet the solubility is irrelevant, and the 40 mesh crystalline powder is the straightforward choice; an 80 mesh or granulated grade changes flow and dust.

P5P is only sparingly soluble as the free acid; the commercial monohydrate or a salt is the usual form, and a salt brings its own counter-ion and water into the specification. The solubility gain comes with an alkaline solution that is not automatically kinder to the molecule. Both forms are light-sensitive and need an opaque pack; P5P is the more labile of the two, particularly in solution, where light, heat and water work together.

The matrix therefore decides more than the raw material. A dry blend or a direct-compression tablet keeps either form in the environment it tolerates most readily. A wet granulation, a gummy cook or a drink puts the material into water and heat, and the stability data has to belong to that matrix. A process validated for the hydrochloride does not automatically cover P5P.

What the label can carry

In the EU, Directive 2002/46/EC Annex II lists pyridoxine hydrochloride at 9(a) and pyridoxine 5'-phosphate at 9(b). They are separate entries, so the label source name has to match the entry for the form in the drum. The UK schedule mirrors the two entries. The phosphate entry is worded pyridoxine 5'-phosphate, not pyridoxal 5'-phosphate, so a P5P product has to confirm that the commercial form matches the entry before the label is fixed; the US ingredient list commonly uses pyridoxal 5'-phosphate. A label written for the hydrochloride does not cover P5P, even when the nutrition declaration says vitamin B6 in both cases.

In the US the Supplement Facts panel declares vitamin B6 while the ingredient list names the form, and a product that contains both forms has to declare both. A blend sold as one form is a labelling problem even when the total vitamin B6 is correct. The claim boundary is unchanged by the form: no disease claim is available for a supplement, and any structure/function wording needs its disclaimer.

When each one is the right choice

The hydrochloride is the default when the artwork is already approved, when the dosage form is dry, when several markets have to be covered from one file, and when the buyer's method is validated for the salt. It is also the simpler file: one counter-ion, one assay convention and a well-established supply chain.

P5P becomes the choice when the destination list has an entry that matches the drum, when the pack and formula have been studied with it, and when the method covers the phosphate. Those are file conditions, not preferences. A switch attempted before the file exists is a formula change with no label behind it.

What to write when you switch

Write the specification around the substance: chemical name with salt and hydrate, CAS number, assay basis and method, counter-ion, water limit, particle size and the label name for each market. Add the statement that the material is a single form, with no other B6 source blended in, unless a blend is what the order asks for.

Then test the switch against four numbers: pyridoxine mass per unit, label percentage, overage and end-of-shelf-life claim. If any of the four cannot be supported by data in the new matrix, the form is not ready to change.

The wider comparison is on the grade page; the catalog specification is on the vitamin B6 product page; the certificate lines are on the COA page; the storage question is on the stability page; the source lists and label rules are on the compliance page. The NRV entry and the daily-value entry define the reference values.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation