Calcium pantothenate vs pantothenic acid: the salt, the calcium and the label
Calcium pantothenate is the calcium salt of D-pantothenic acid and the solid form used in capsules, tablets and dry blends. The free acid is a viscous, hygroscopic material that is difficult to handle as a powder, while the salt is a white crystalline powder, freely soluble in water and specified at 8.0–8.6% calcium. The nutrition label declares pantothenic acid, but the ingredient list names the salt, so the conversion factor, the calcium figure and the label wording all have to agree.
The calcium salt is the practical solid, but the label declares pantothenic acid; the salt name, the calcium figure and the conversion belong in the specification.
Two names, two identities
Calcium pantothenate and pantothenic acid are related but not interchangeable. The salt carries two pantothenate anions for each calcium ion; the free acid carries the acid protons instead. That difference gives each material its own CAS number, molecular weight, certificate and label name.
| Property | Calcium D-pantothenate | D-Pantothenic acid |
|---|---|---|
| CAS number | 137-08-6 | 79-83-4 |
| Formula | C18H32CaN2O10 | C9H17NO5 |
| Molecular weight | 476.53 | 219.23 |
| Calcium | 8.0–8.6% (catalog) | None |
| Form | White powder | Viscous oil |
| Solubility | Freely soluble in water | Water-soluble, handled as a liquid |
| Label name | Calcium D-pantothenate | Pantothenic acid |
The molecular weights are the key to the arithmetic. The salt contains two pantothenic acid units, so 476.53 g of salt carries 438.46 g of pantothenic acid, or about 92.0% by mass. The free acid is the reference molecule, but it is not the practical solid for a capsule, a tablet or a dry blend.
The conversion between the two
At 100% assay, 100 mg calcium pantothenate delivers 92.0 mg pantothenic acid. The reverse factor is 1.087: 10 mg pantothenic acid needs 10.87 mg calcium pantothenate before any assay or moisture correction. A label that declares 10 mg calcium pantothenate is declaring 9.20 mg pantothenic acid, not 10 mg.
The assay basis is a second correction. A lot at 99.0% on the dried basis with 3.0% loss on drying is about 96.0% of the powder as weighed, so the weigh-up for 10.87 mg of pure salt becomes 11.32 mg of powder. The two corrections are separate: the salt factor changes the molecule, the moisture factor changes the mass on the balance.
A common label error is to apply one correction and not the other. Write the basis on the specification and show the conversion in the batch record, so that the label, the weigh-up and the certificate use the same number.
Why the calcium figure matters
Calcium is not a filler in this material; it is the counter-ion that makes the salt. At 100% assay the salt contains 8.41% calcium, and the catalog range of 8.0–8.6% is set around that figure. The calcium result is therefore a direct check on the form, and it should be read against the assay rather than on its own.
The ratio is the useful number. Divide the calcium percentage by the assay percentage on the same basis: a pure salt sits near 0.084. A high ratio points to a calcium-rich diluent or a different calcium salt; a low ratio points to sodium pantothenate, the free acid or a dilution. Each window can be met on its own while the ratio fails.
The calcium also reaches the label. A 500 mg pantothenic acid serving carries about 46 mg calcium from the salt. That is small against a daily calcium reference, but it is not zero, and a high-dose B-complex with several servings can make the calcium line worth checking.
What the label has to say
The nutrition panel declares pantothenic acid, not calcium pantothenate. In the EU, Regulation (EU) No 1169/2011 sets the reference intake at 6 mg and the declaration uses the name “pantothenic acid”; in the US, the Supplement Facts panel uses “Pantothenic Acid” with a daily value of 5 mg. “Vitamin B5” is a synonym, not the nutrient name on the panel.
The ingredient list is where the salt appears. It should say “calcium D-pantothenate” or “calcium pantothenate”, not only “vitamin B5”, because the salt is what was weighed. If the formula uses the free acid, the ingredient list and the nutrition panel no longer describe the same material in the same way, and the market file has to be checked.
The EU food-supplement directive, 2002/46/EC, lists the pantothenic acid forms in its Annex I; as of this review it names the calcium and sodium D-pantothenates, dexpanthenol and pantethine, and the free acid does not appear as a separate entry. That list is the reference the buyer checks, and the buyer's regulatory team confirms what it means for the destination and checks the current text.
What to write into the specification
- “Calcium D-pantothenate, CAS 137-08-6, C18H32CaN2O10.”
- “Assay 98.0–101.0% on the dried basis by HPLC; loss on drying ≤5.0%.”
- “Calcium 8.0–8.6% by complexometric titration; state the basis.”
- “Specific rotation +25.0° to +28.5° on the dried basis.”
- “Label basis: pantothenic acid, with the salt factor 0.920 and the assay basis stated.”
- “Destination market and the form named in the market file confirmed before the order.”
A specification that stops at “vitamin B5 99%” has not named the form, the calcium or the label basis. The product hub carries the catalog values; the COA page shows where the calcium and rotation sit on the certificate; the compliance page sets out the market documents.
When the salt is the practical choice
Choose calcium pantothenate for capsules, tablets, powder sticks and dry blends. It is a solid, it dissolves freely, it has a defined calcium figure and a rotation that can be checked, and it is the form the catalog and the certificate describe. For a liquid format, the formulator may prefer a liquid panthenol, but that is a different ingredient and a different label.
Choose the free acid only when the formula or the label calls for it and the market file covers it. It is not a drop-in: the mass changes, the handling changes, the stability changes and the label citation changes. A switch in either direction needs a written change control, a new specification and a label review.
The grades page places this comparison in the wider range; the identity page gives the tests that separate the forms; the choline page shows how another vitamin in the same category handles its salt and label; the quality page describes the release file behind the certificate.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation