02 Grade comparison

Calcium pantothenate grades: powder, granulation and dilution

Technical document 02 · Reviewed 2026-11-19 · Vitamin B5

On this page
  1. Why one name covers several grades
  2. The grade families side by side
  3. Particle size, flow and dust
  4. The dose decides the grade
  5. What to write into the specification
  6. When a different grade is the wrong choice

Vitamin B5 is bought as calcium D-pantothenate powder, normally specified at 40 mesh, with granulation available on request. The grade choices that matter in a supplement line are physical — particle size, granulation and dilution — plus the salt form itself. The chemistry is fixed by the monograph; the grade changes flow, dust, blend uniformity and the label.

In one line

The grade decision is mostly physical: mesh, granulation and dilution change the flow, the blend uniformity and the label, not the chemistry.

Why one name covers several grades

“Vitamin B5” is a label name, not a specification. The commercial material is calcium D-pantothenate, a white powder with a defined assay, calcium figure and rotation. A buyer can meet the same name on a 40 mesh powder, a granulated powder, a diluted premix, the sodium salt or a liquid panthenol, and those are not interchangeable. The form and the physical grade both belong in the purchase order.

This range supplies the standard 40 mesh powder and a granulated powder on request. The other lines below are forms a buyer may meet in the market; they are listed so that a quotation can be read, not because they can be substituted without a new specification.

The grade families side by side

Calcium pantothenate grade families and what changes
GradeFormTypical useWhat changes
Standard powderWhite powder, ≥95% through 40 meshCapsules, tablets, dry blendsBaseline flow and dust
GranulatedAgglomerated powder, on requestHigh-speed tableting, stick packsFlow, bulk density, dispersion
Diluted premixCalcium pantothenate on a carrierLow-dose blendsAssay per gram, carrier, label
Sodium pantothenateSodium salt, powderWhere calcium is not wantedCounter-ion, label, hygroscopicity
D-panthenolLiquid alcoholLiquid formatsNot a powder; different label name
Free acidViscous oilSpecial handlingNot a drop-in; stability

The first two rows are the grades in this range. The last four are different materials or different specifications, and each one moves a line on the certificate. A granulated powder still has to meet the same assay, calcium and rotation; a diluted premix does not, because the carrier changes the assay per gram and the label.

Particle size, flow and dust

40 mesh is a finishing specification: at least 95% of the powder passes a 40 mesh sieve. The number tells the buyer about the coarse fraction, not the whole particle-size distribution. A powder that passes 40 mesh can still contain a lot of fines, and fines are what segregate, dust and stick to a capsule shell.

Granulation binds the fines into larger particles. The result is usually better flow, less dust and a more stable bulk density, but it can slow dispersion in a stick pack and it adds a different particle-size line on the certificate. Bulk density and flow are not on the catalog specification; they can be agreed as additional lines when the dosage form needs them.

The test method matters. A sieve result depends on the sieve, the shaking time and the sample size; a laser diffraction result gives a distribution that a sieve result does not. Ask which method produced the number before comparing two suppliers; the methods library describes both approaches.

The dose decides the grade

A capsule or tablet that carries 5–10 mg of pantothenic acid takes a small amount of powder in a large fill. Straight calcium pantothenate at that dose is a minor fraction of the blend, and a minor fraction is where segregation and uneven mixing show up. A diluted premix can improve uniformity, but it adds a carrier, lowers the assay per gram and changes the label.

A high-dose tablet or stick pack takes the straight powder. The fill weight is dominated by the ingredient, the flow and the dust matter more than the dilution, and the calcium from the salt becomes a visible part of the calcium figure. At 500 mg pantothenic acid, the salt contributes about 46 mg calcium, which is no longer a rounding error on a label.

The dosage form also sets the particle size. A direct-compression tablet wants flow and a coarse fraction; a hard capsule can take a finer powder; a stick pack wants a powder that disperses without lumps. Decide the form before the grade, not after the quotation.

What to write into the specification

  • “Calcium D-pantothenate, CAS 137-08-6, C18H32CaN2O10.”
  • “Assay 98.0–101.0% on the dried basis by HPLC; loss on drying ≤5.0%.”
  • “Calcium 8.0–8.6% by complexometric titration; specific rotation +25.0° to +28.5° on the dried basis.”
  • “Identification by IR and HPLC; particle size ≥95% through 40 mesh.”
  • “Granulation, bulk density or flow only if agreed in writing.”
  • “Pack, retest period and destination market stated on the order.”

A specification that names only “vitamin B5” has not named the form, the grade or the basis. The product page carries the catalog values; the level-four comparison covers the salt and the label; the choline page shows how a different vitamin handles its own salt form and label; the quality page describes how the grade is released.

When a different grade is the wrong choice

If the formula is a ready-to-use liquid, the calcium salt is not the only option, and a liquid panthenol may be the market form; that is a different ingredient with a different label. If the label names pantothenic acid as the ingredient rather than the salt, the calcium salt is not a drop-in without a conversion and a label review. If the process needs a very fine powder for a coating or a suspension, a 40 mesh powder may be too coarse, and the mill has to be part of the agreement.

The reverse is also true: a granulated grade is not a substitute for the standard powder in every process. It is a different physical specification, and it should be chosen because the process needs flow or dust control, not because it sounds more finished.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation