Natural tocopherol grades: the concentrate, the dilution and the powder
Natural tocopherol is sold as an oil at different strengths, and this catalogue's grade is the ≥90.0% d-alpha-tocopherol concentrate: a yellow to amber oil, available as a powder on a carrier on request. The grade sets the IU per gram, the mass per dose and what the label can declare, so a percentage on its own is not a specification. The ester forms are separate products rather than stronger or weaker versions of this oil.
The grade is a concentration and a matrix decision: the same d-alpha-tocopherol at 90% and at 50% differs in the mass per dose and in the IU the label can carry.
Why concentration is a weighing question
A dose is written in IU or in milligrams of alpha-tocopherol equivalent, while the fill in a softgel or a blend is weighed in grams. The grade is what turns one unit into the other. Natural d-alpha-tocopherol carries 1.49 IU per milligram, so the concentrate at 90.0% is about 1,341 IU per gram, while a concentrate diluted to 67% reads about 1,000 IU per gram on the same arithmetic.
The industry has standardised on those IU strengths, which is why a buyer sometimes asks for “1,000 IU natural vitamin E” and receives an oil that is about two-thirds tocopherol and one-third carrier. Both are legitimate products; they are not the same grade. The catalogue grade here is the concentrate, and a lower strength is a dilution, agreed as its own specification with its own carrier.
The concentrate is produced by concentrating the alpha fraction of a vegetable-oil deodorizer distillate. That step, not the plant, is what sets the assay, the colour and the homologue profile. It also explains why the same supplier can offer 90%, 67% and 50% oils from one production line.
The grades compared
| Grade | Assay | IU per gram | Matrix | Label name |
|---|---|---|---|---|
| Concentrate, this grade | ≥90.0% d-alpha-tocopherol | ≥1,341, calculated | None; the oil itself | D-alpha-tocopherol |
| Diluted concentrate | About 67% | About 1,000, calculated | Carrier oil, declared | D-alpha-tocopherol |
| Diluted concentrate | About 50% | About 745, calculated | Carrier oil, declared | D-alpha-tocopherol |
| Powder on carrier, on request | Set by the oil load | Depends on the load | Carrier, declared | D-alpha-tocopherol, carrier named |
| Mixed tocopherols | Alpha, gamma and delta together | Not an alpha concentrate | Oil | Mixed tocopherols, homologues declared |
The IU column is calculated, not certified: assay multiplied by 1.49. Two oils can reach the same IU per gram from different assays, because one carries more carrier than the other, and the carrier is what the label has to declare. A buyer comparing percentages is comparing concentrations; a buyer comparing IU is comparing potency.
Viscosity, density and handling
The concentrate is a viscous oil with a density near 0.95 g/mL. It is insoluble in water and soluble in fats, in ethanol and in the usual organic solvents, which is why it suits a softgel fill, an oil blend and an emulsified system. At room temperature it pours slowly; a chilled warehouse can thicken it or set it, and the oil should be brought to room temperature and mixed before a sample is drawn. Warming is gentle and brief, not a hot plate left on.
Colour is the practical read-out. Yellow to amber covers a fresh concentrate, and the oil darkens as it oxidises; a darker bottle is a storage question, not automatically a grade difference. Light matters more than a clear bottle suggests, so the amber pack is part of the material.
The powder grade behaves differently: the oil sits on a carrier, the powder flows and disperses, and the carrier cuts the potency per gram by roughly half. It suits a tablet or a blend that cannot take an oil. The carrier, its source and its load belong in the specification, because the label has to name it.
Dose arithmetic and the fill weight
At 1.49 IU per milligram, a 30 IU dose is 20.1 mg of d-alpha-tocopherol, which is 22.4 mg of the 90% oil. A 400 IU dose is 268.5 mg of the alcohol, which is 298 mg of the oil before any overage. A 1,000 IU dose needs 745 mg of the oil, which is a large softgel fill and a reason to consider a different presentation rather than a larger capsule.
A softgel fill has a volume limit as well as a mass limit, and at a density near 0.95 g/mL the oil is bulky. A tablet or a two-piece capsule takes the powder on carrier, where the dose is spread over more mass; a stick pack takes an emulsified or powdered form, because the neat oil does not disperse in water. The dosage form picks the grade, and the grade fixes the fill weight.
The label declaration is a third arithmetic step. Natural d-alpha-tocopherol converts to alpha-tocopherol equivalent at a factor of 1.0, so the milligram figure is the declared figure; the IU figure on the specification is not the label unit. Keep the three numbers (assay, IU, mg α-TE) in one line of the specification so they cannot drift apart.
The specification lines to agree
- “D-alpha-tocopherol (natural), CAS 59-02-9, C29H50O2, oil.”
- “Assay ≥90.0% d-alpha-tocopherol by HPLC, as-is; specific rotation reported with conditions.”
- “Peroxide value ≤10.0 meq O₂/kg; appearance yellow to amber oil.”
- “Heavy metals Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg; microbiology as listed.”
- “IU factor 1.49 per mg for the d form; state the IU per gram calculated from the lot assay.”
- “Carrier, its source and its load, if the grade is a powder or a dilution.”
- “Pack, headspace and storage condition; source record for the feedstock.”
When this oil is the wrong grade
If the product is a dry powder that will sit in a warehouse for a year, the acetate is the more practical vitamin source: the ester protects the phenol and does not react with the matrix. If the label names the acetate, this oil is a different ingredient and not a substitution. If the formula wants gamma and delta as well as alpha, a mixed tocopherol is the product, and an alpha concentrate is the wrong one however high its assay.
A clear beverage is also a case for a different form. The neat oil separates, so it needs an emulsified system or a water-dispersible powder, and the emulsion has to be studied in its own pack. The grade table answers the potency question; the dosage form answers the physical one.
The catalog limits are on the natural tocopherol product page. The ester comparison is on the vitamin E page and, in detail, on the natural tocopherol versus tocopheryl acetate page; the certificate lines are on the COA page; the assay method is in the HPLC method note; release practice is on the quality page.
In this document
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation