The regulatory file for natural tocopherol
A natural tocopherol file has four layers: the specification and lot certificate, the destination route for a vitamin E product, the label declaration and the claim review. The material is d-alpha-tocopherol, CAS 59-02-9, supplied as an oil; the isomer and the feedstock source belong in the file because the label and the allergen statement follow them. The buyer's regulatory team confirms the destination route, and this page names the framework, the documents and the checks that go in the folder.
The isomer, the source and the dose decide the route, the label and the allergen statement, and the buyer's regulatory team confirms all three for the destination.
The four checks, and the two routes
Four questions sit behind the file: is the substance usable in this category, what contaminant ceilings apply to the product as sold, how is the vitamin declared, and is the pack wording a claim or a description? A certificate answers none of them; it describes the lot, and the route is recorded beside it.
One route question is specific to this material. A tocopherol added to an oil to slow oxidation is a food additive with its own entry and conditions; the same substance declared as vitamin E in a supplement is a nutrient, with a different instrument, label line and maximum. The two routes can meet in one product, and the file should say which role the tocopherol plays in each place.
The framework here reflects the position at the time of writing. The current text decides, and one destination's route is not another's.
European Union
A food supplement in the EU is governed by Directive 2002/46/EC: Annex I fixes the vitamin E reference value at 12 mg alpha-tocopherol equivalent, and Annex II lists the vitamin forms the category draws on. The buyer's regulatory team confirms that the form, the source and the daily dose sit inside the current text, and that the member-state route is settled. Great Britain uses retained lists of its own while Northern Ireland stays inside the EU framework, so the delivery address decides which file applies.
The antioxidant use has a separate home in Regulation (EC) No 1333/2008, which lists tocopherols with conditions on the food category and the level. A product can therefore carry a tocopherol doing antioxidant duty in one part of the formulation and declared as vitamin E in another; the two entries are checked separately.
Regulation (EU) No 1169/2011 governs the label: the vitamin appears per portion as mg alpha-tocopherol equivalent and as a share of the 12 mg reference value, with the form named in the ingredient list. The form-specific conversion factor belongs in the label file, not in a spreadsheet that predates the current guidance.
United States
In the US, vitamin E is treated as a dietary ingredient, and the tocopherol here is the nutrient rather than an isolate. 21 CFR 111 supplies the cGMPs and 21 CFR 101.36 the Supplement Facts format; vitamin E is declared in mg of alpha-tocopherol against a 15 mg Daily Value, and the source goes into the ingredient list, for example “Vitamin E (as d-alpha-tocopherol)”. The buyer's regulatory team confirms the basis; no premarket notification is claimed by this page.
No federal lead maximum applies to dietary supplements, yet lead still travels: Proposition 65 in California has its own threshold and can require a warning, so a product that sits inside an EU limit may sit outside a Californian one. State and dose are read together, and arsenic follows the same logic.
Contaminant ceilings and the material limit
Contaminant limits apply to the finished product, so the bottle result is an input rather than an answer. The table is the usual starting point; the destination text, the daily dose and the inclusion rate decide the final figure.
| Parameter | Usual supplement limit | Evidence the file needs |
|---|---|---|
| Lead (Pb) | 3.0 mg/kg in the EU supplement | Lot result, method, limit and the finished-product calculation |
| Cadmium (Cd) | 1.0 mg/kg in the EU supplement | Lot result and any category exception that applies |
| Mercury (Hg) | 0.10 mg/kg in the EU supplement | Lot result and method |
| Arsenic (As) | Customer or market limit | The agreed limit and the method, stated on the certificate |
| Peroxide value | Not a legal limit in either market | The material limit, ≤10.0 meq O₂/kg, and the trend across lots |
The peroxide value row is worth separating from the rest. It is a quality limit agreed in the specification, and it is the number that warns of an off-odour in a softgel months before any legal ceiling is reached. No destination limit protects a brand from a stale oil; the specification has to do that work.
What the pack may say
The EU claims register carries vitamin E entries, each with conditions on the wording and on how much the product must contain. They are not reproduced here, and none is recommended. The brand checks the register and the daily dose before any wording goes on the pack.
A US structure/function statement carries the DSHEA disclaimer and needs substantiation; a disease claim is not open. “Vitamin E” and “d-alpha-tocopherol” are ingredient declarations, not claims; “natural” describes the configuration of the molecule, and whether the pack may use it depends on the source record and the destination's rules, which the brand's reviewer confirms. We publish the specification and make no health claim.
The document pack
The folder needs the lot COA with the HPLC assay, the UV identity, the peroxide value, the rotation, the metal panel and the microbiology; a specification naming the isomer, the CAS number, the IU factor and the pack; an SDS in the 16-section format; and the feedstock source record, usually a vegetable-oil deodorizer distillate.
The allergen statement follows that source. Whether a soy, sunflower or rapeseed feedstock requires a statement on the pack is the brand's decision on the source and the market rules; this page does not declare the material free of any allergen. Add the GMO, origin and residual-solvent statements, any antioxidant declaration, and the retest period with its pack and condition.
Checks before the first order
- Specification version, isomer name and CAS 59-02-9 are on the file.
- COA, TDS, SDS, source, allergen, GMO and residual-solvent statements are present.
- The contaminant results are converted to the finished-product dose.
- The pack names the form and gives the vitamin in mg alpha-tocopherol equivalent.
- The claim and the natural designation have been reviewed for the destination.
- The pack, the storage condition and the retest period are agreed in writing.
The natural tocopherol product page carries the catalog specification; the COA page explains the lot certificate; the identity page covers the analytical evidence; the EU regulatory notes collect the framework references; the quality page describes the release file.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation