Folic acid, folinate or methylfolate: choosing a folate form
Folic acid, calcium folinate and the methylfolates are three different label ingredients, not three strengths of one vitamin. They differ in chemical state, in molecular weight, in the water they carry and in stability, and each has its own name on a permitted-source list. The choice is fixed by the market first, the dosage form second and the stability data third — not by which powder looks yellow in the sample bag.
Switching folate form changes the ingredient, the mass per dose, the label line and the analytical method at the same time, so it is a re-formulation rather than a substitution.
Why the form is the first question
On a nutrition panel all three read as folate. In the ingredient list they do not: folic acid is pteroylmonoglutamic acid, CAS 59-30-3, a fully oxidised molecule that is stable as a dry powder. Calcium folinate is the reduced 5-formyl derivative, supplied as a calcium salt. The methylfolates are the reduced 5-methyl derivative, supplied as a calcium salt or as a glucosamine salt. The nutrition declaration can be identical while the drum, the assay convention and the label name are not.
The assay percentage is the trap. A quotation for "folate 99%" may describe the free acid, a salt, a hydrate or a trituration, and those are not interchangeable at the milligram level. Ask for the chemical name, the salt and the hydrate before comparing two numbers.
The four forms side by side
| Form | Chemical state | How the assay is usually expressed | Ingredient-list name |
|---|---|---|---|
| Folic acid | Oxidised pteroylglutamic acid, C19H19N7O6 | 97.0–102.0% on the anhydrous basis, HPLC | Folic acid |
| Calcium folinate | Reduced 5-formyl derivative, calcium salt | On the dried or anhydrous basis; hydrate declared | Calcium folinate |
| Calcium L-methylfolate | Reduced 5-methyl derivative, calcium salt | As the salt; hydrate and isomer declared | Calcium L-methylfolate |
| 5-MTHF glucosamine salt | Reduced 5-methyl derivative, glucosamine salt | As the salt, with the glucosamine mass included | The full salt name |
The fourth column is the part buyers underestimate. In the EU the source must appear as it is named in the permitted list, and methylfolate entries are salt-specific; in the US the ingredient list names the salt while the Supplement Facts panel declares folate. A label written for one salt does not cover another, even when both are "methylfolate" in conversation.
Converting mass to folate
Folic acid has a molecular weight of 441.4 g/mol, and its assay is expressed as the acid, so a milligram of powder at 100% is a milligram of folate. A salt is not: the counter-ion and any water of hydration add mass that carries no folate, so a milligram of salt delivers less than a milligram of folate. That fraction comes from the molecular weight and the declared hydrate, and it should be confirmed against the assay basis on the certificate, not estimated from the label claim.
The second conversion is the label unit. The EU and the UK declare folate in micrograms against a nutrient reference value of 200 µg, so a 400 µg dose is 200% of the reference value. The US declares folate in micrograms of dietary folate equivalents, and the DFE convention applies a factor to folic acid taken with meals. At a factor of 1.7, a 400 µg DFE target corresponds to about 235 µg of folic acid. The factor and the meal condition sit in the labelling regulation; confirm the current text before the artwork is fixed, because the number on the panel depends on it.
At these masses the raw material is not the constraint. One kilogram of folic acid is 1,000,000 mg, which is 2.5 million doses at 400 µg before any overage. The constraint is distribution: at 400 µg in a 500 mg capsule the folate is 0.08% of the fill, and at 1 kg in a 500 kg blend it is 0.2%. Blend uniformity, not drum assay, decides whether the label claim holds in the finished unit.
Stability and handling by form
Folic acid is the most robust of the three as a dry powder, provided it is kept dark and dry. It is still light-sensitive, and the yellow to orange colour is a poor guide to how much light it has seen. The reduced forms are more reactive: the folinate and the methylfolates oxidise more readily, and heat and moisture accelerate the loss. The commercial salts exist to manage that, and the supplier's stability data should be read in the matrix you will actually use, not as a general claim.
Particle size and flow differ as well. The 80 mesh crystalline powder disperses well in a dry blend but carries static and dusts easily; a milled 100 mesh grade or a granulated grade changes flow and can reduce segregation in a low-dose blend. Whichever form is chosen, the pack has to be light-tight, and the 1 kg foil pouch is the smallest unit that keeps the certificate, the lot code and the retained sample aligned.
What changes in the specification and the label
A form switch is a new specification, a new method and a new label. The assay method validated for folic acid will not quantify a methylfolate salt without revalidation, and the related-substance profile is different because the degradants are different. The water limit changes with the hydrate. The label name changes. The overage changes if the stability curve changes.
Write the specification around the form, not around the vitamin: the chemical name with the salt and hydrate, the CAS number for that substance, the assay basis, the identity tests, the individual degradants, the water limit and the mesh. Then state the label market and the name that will appear on it, so the specification and the artwork cannot drift apart.
When to stay with folic acid
Folic acid remains the default where the label is already approved, where the permitted list for the destination market has not been checked for the salt, where the dosage form is a dry capsule or tablet and the stability data for the alternative is thin, or where the analytical method in the buyer's laboratory covers only the acid. None of those are reasons of principle; they are reasons of file readiness.
Switch when the market permits the salt by name, when the label arithmetic has been rebuilt around the salt's folate fraction, and when there is matrix-specific stability data for the finished pack. A switch made on the strength of a sample bag, without the file, is the harder version of the same decision.
The forms are compared in the folic acid versus methylfolate note, and the catalog specification is on the folic acid product page. The certificate lines are set out on the COA page, the storage question is on the stability page, and the market rules are on the compliance page. The reference values are defined in the NRV entry and the daily-value entry.
In this document
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation