The regulatory file for D-chiro-inositol
D-chiro-inositol is a defined isomer, so its file cannot borrow the status of myo-inositol or of “inositol” in general. The specification and the certificate describe the material; the regulatory file records whether that material can be sold where it is going, at what limit and under which name. The buyer's regulatory team confirms that route, and this page sets out the framework and the evidence to keep.
The file stands on the named isomer, not on the inositol family: D-chiro-inositol, its specification and its destination route are checked together.
What the file has to hold
A workable file has four parts: the current specification, with the isomer, CAS number and source; the certificate that released the lot; the destination's limits and label requirements for the finished product; and a change-control record covering source, process and pack. The technical data sheet states the specification and the safety data sheet covers handling, but neither decides the market route.
Around those four sit the supporting statements: source and origin, allergens, GMO status, residual solvents, and any market-specific declaration the importer asks for. Keep an index with version numbers so a reviewer can see which documents belong to which specification. A missing statement is easier to close at quotation than after the goods have shipped.
European Union
A food supplement reaches the EU market under Directive 2002/46/EC, is labelled under Regulation (EU) No 1169/2011 and is claimed under Regulation (EC) No 1924/2006. D-chiro-inositol is a specific substance rather than a synonym for inositol, so the first question is its position under the novel-food Regulation (EU) 2015/2283. Where a documented history of significant consumption before 15 May 1997 is absent, authorisation is needed and the permitted form and conditions appear on the Union list in Regulation (EU) 2017/2470.
As of this review, the status of the exact D-chiro-inositol material has to be checked in the novel-food status catalogue and the Union list, and the buyer's regulatory team confirms the member-state route and the finished product. This page does not state that the ingredient is authorised, notified or listed in any market. Save the entry that covers the material, with its specification and conditions, in the file.
Contaminants fall under Commission Regulation (EU) 2023/915, and the limits apply to the product as sold, which means the calculation starts from the finished daily dose rather than from the drum.
United States
In the US, the file has to show how D-chiro-inositol is positioned as a dietary ingredient and why the intended use fits that position. A dietary ingredient with a marketing history before 15 October 1994 can rest on that history; without it, a new dietary ingredient notification under 21 CFR 190.6 is the route, and the supplier names the basis it relies on. The buyer then checks that the basis covers the finished product, the dose and the label.
Manufacture sits under the dietary supplement cGMP in 21 CFR 111, the Supplement Facts panel under 21 CFR 101.36, and structure/function statements under 21 CFR 101.93 with the disclaimer. None of these is settled by the certificate or the specification.
Contaminants and the finished dose
A drum result is not yet a compliance answer. The market limit applies to what is sold, so the metal figures have to be carried through the serving size and expressed as an intake. The table gives the reference values normally used for a supplement file; the text in force in the destination, read with the daily dose, sets the figure.
| Parameter | Reference value | Evidence to attach |
|---|---|---|
| Lead | 3.0 mg/kg in the supplement | Lot figure, method, limit and dose calculation |
| Cadmium | 1.0 mg/kg in the supplement | Lot figure and any category exception |
| Mercury | 0.10 mg/kg in the supplement | Lot figure and method |
| Arsenic | Agreed market limit | Agreed limit and the method that produced it |
Carry each result through the dose: a mg/kg figure becomes a daily intake in micrograms once the serving is applied, and that is what the limit is checked against. A plant-derived lot also deserves a look at the elements its extraction route can concentrate.
The label and the claim
Name the isomer on the label. “Inositol” does not declare D-chiro-inositol, and a 40:1 product needs both names and both quantities. In the EU, inositol has no reference intake, so no percentage NRV appears; in the US, the panel carries “Daily Value not established”.
Claims are reviewed separately from the certificate. An EU health claim needs authorisation under Regulation (EC) No 1924/2006, and a US structure/function statement needs substantiation and the DSHEA disclaimer. Wording about a metabolic or hormonal effect belongs to a health area, not to a permitted food claim, and this site makes no such statement. A front-of-pack “40:1” is a ratio statement, not a claim, and it does not replace the ingredient list. No disease-related claim is open in either market.
Documents for the D-chiro file
The certificate should carry the D-chiro assay and its method, the myo-inositol result from a resolving run, moisture, optical rotation, the metal panel, the microbial count and the particle size. The specification should name D-chiro-inositol, CAS 643-12-9 and the source. Add the technical data sheet, the safety data sheet, the source and process description, allergen and GMO statements, the residual-solvent statement and the origin record.
For a plant-derived material, add the plant part and the extraction solvent, and name any other cyclitol the route can carry. The COA page shows where each result belongs; the identity page covers the isomer evidence; the EU regulatory notes hold the framework references.
Checks before the first order
- The specification version, CAS number and isomer are named.
- The novel-food or dietary-ingredient route is confirmed for the destination and recorded.
- COA, TDS, SDS, source, allergen, GMO, origin and residual-solvent statements are in the file.
- The metal results have been converted to the finished daily dose.
- The label names the isomer and the quantity, and the claim wording has been reviewed.
- Source, process and pack sit under change control.
The product page carries the catalog specification, and the quality page describes the release file.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation