04 MOQ & ordering

Calcium ascorbate MOQ: 1 kg pouch, 25 kg drum and lead time

Technical document 04 · Reviewed 2026-11-20 · Calcium Ascorbate

On this page
  1. Why the entry pack is 1 kg
  2. Packs and formats
  3. Dispatch and transit
  4. Six details a quotation should carry
  5. The 1 kg qualification lot
  6. Terms to agree before the first order

Calcium ascorbate starts at 1 kg in a foil pouch, with a 25 kg fiber drum as the bulk pack; the standard pack is quoted at 1–7 days. A quotation that can be compared identifies the hydrate form, the assay basis, the calcium figure, the mesh or granulation, the quantity and pack, the destination and Incoterm, and the market documents. Those details decide which powder is being offered, not only how much of it.

In one line

The 1 kg pouch is the qualification unit and the 25 kg drum is the production unit; the minimum follows the pack, not a volume incentive.

Why the entry pack is 1 kg

One kilogram is enough to run a bench trial, hold a retained sample and send a portion to an outside laboratory. The pouch ships as a parcel, which helps when a formulator needs material before the production plan is settled. Every pouch carries a lot code and a certificate, so the powder on the bench can be traced to the lot that was released.

Requests below a kilogram are normally drawn from a larger lot and repacked. Handling rises, the original pack identity is lost and traceability weakens, while the chemistry is unchanged. The 25 kg drum is the bulk unit: handling per kilogram falls, but inventory and storage time rise. The entry pack is a traceability decision rather than a volume target.

Packs and formats

Calcium ascorbate packs
PackNet weightTypical useNotes
Foil pouch1 kgTrial, sample, small batchMoisture and light barrier; close it after opening
Fiber drum25 kgProductionInner liner; the same lot code on drum and liner
Granulated powderOn requestFlow and dust controlA new particle specification, not a packing note
Blend or dilutionOn requestA lower assay per gramCarrier, calcium and label all change

The catalogue grade is an 80-mesh powder: at least 95% passes the sieve. Granulation is a different particle specification and is quoted as one. A blend with another ascorbate or a carrier is a different product again: its assay, calcium figure and label move, and it needs its own specification and lot file.

Dispatch and transit

The standard pack is quoted at 1–7 days from confirmation of the order. That window covers picking, documents and dispatch, not transit, customs or the customer's release. Granulation, blending or a non-standard pack adds time, quoted separately.

Request the dispatch date itself, not only the range. The pouch usually ships as a parcel; the drum goes on a pallet. The Incoterm assigns freight booking and entry clearance, and the COA, specification and safety data sheet should travel with the pack rather than follow it.

Six details a quotation should carry

  1. Material and hydrate form. Calcium ascorbate dihydrate, CAS 5743-27-1, written out rather than abbreviated.
  2. Release specification. Assay and basis, calcium, pH, loss on drying, mesh or granulation, metals and microbiology.
  3. Quantity and pack. A pouch, a drum, or a granulated or blended variant.
  4. Destination and Incoterm. Destination country, port or address, and the trade term.
  5. Market documents. A COA, specification and SDS, plus any statement the importer needs for the destination.
  6. Intended use and market. The use, whether supplement or food, and the market of sale.

“Calcium ascorbate” on its own leaves too much open. The hydrate form moves the calcium and vitamin C figures, the mesh moves the line, and the market moves the document list. Commercial terms are quoted, not published here.

The 1 kg qualification lot

The pouch that qualifies the material is the 1 kg pack. Before scaling, test identity, assay, calcium, pH, water and microbiology; retain a sample from the same pack. Sample, COA and quotation should carry the same lot code. Untraceable material is a demonstration, not a qualification sample.

A trial below a kilogram has to be repacked; it is not the catalogue pouch. It is drawn from a bulk lot, carries its own handling record and is not the 1 kg foil pack. Have the split confirmed in writing, and record its lot code with the trial results. Bench material and production material can be different lots even when the specification matches.

Where flow is the question, ask for the granulated grade rather than the standard powder. Test the grade that will be bought: a successful run on a different particle size does not transfer to the production pack.

Terms to agree before the first order

Commercial and quality terms belong together on the quotation: Incoterm, pack, dispatch window, specification revision, one COA per lot, retained sample, retest period and the change route. Record them in a quality agreement before the first production order; after a dispute the conversation is harder.

If a lot misses the agreed specification, the evidence is the retained sample and a joint re-test by the named method, not a photograph. The quality agreement should name the referee laboratory and say who pays for it. A return based only on appearance is difficult to defend either way.

The product hub carries the catalogue specification; the COA page lists the release tests; the compliance page covers the market files; the MOQ glossary entry defines the term; the logistics page covers shipping and documents.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation