04 MOQ & ordering

Biotin: MOQ, packaging and ordering

Technical document 04 · Reviewed 2026-11-18 · Biotin

On this page
  1. Why the minimum is one kilogram
  2. The pack is part of the specification
  3. Lead time and what starts the clock
  4. The six details a quotation needs
  5. Samples and the retained sample
  6. Terms that belong in the offer

Biotin orders start at 1 kg, packed as a 1 kg foil pouch, with a 25 kg fiber drum for production volumes and a lead time of 1–7 days. The minimum is a qualification unit rather than a retail pack: it is enough material to run a bench trial, check the identity and the blend behaviour, and decide whether the drum is the right next step. A quotation needs six details before it can be a real offer.

In one line

One kilogram is the qualification unit: enough to run a bench trial and a small batch from a lot you can trace.

Why the minimum is one kilogram

At a 100 µg label claim, one kilogram of pure biotin covers about ten million portions, and one kilogram of a 1% dilution covers about one hundred thousand. Either pack is far larger than a bench trial needs, which is exactly why the 1 kg pouch works as a qualification unit: it carries a released lot, a certificate and a lot code, and it lets the formulator test the real material rather than a hand-made laboratory blend.

The same minimum applies to both grades, but it buys a different amount of biotin. One kilogram of the pure grade is close to a kilogram of biotin; one kilogram of a 1% dilution is about ten grams of biotin plus carrier. The order quantity is the same and the biotin units are not, so the grade has to be settled before the quantity is compared.

The pack is part of the specification

Biotin pack sizes and what each one is for
PackNet contentTypical useWhat to check
Foil pouch1 kgBench trial, sample qualification, small batchMoisture barrier, food-grade liner, lot and retest label
Fiber drum25 kgProduction batch, repeated use in a blendLiner condition, closure, net weight, drum labelling

The pouch and the drum are not interchangeable beyond their size. The pouch is the pack a formulator opens and closes during a trial, so its moisture barrier and its reseal behaviour matter. The drum is a production pack, and its liner, closure and handling matter more than its outer print. Both should carry the product name, the grade, the lot code, the net weight and the retest date, and both should have a food-contact declaration for the destination market.

Lead time and what starts the clock

The catalog lead time is 1–7 days. The lead time is counted from the point at which the grade, quantity, pack, specification and document set are settled; an enquiry on its own does not start it. A pure grade in a 1 kg pouch is a different order from a 1% dilution in a 25 kg drum with a carrier declaration, even when both are described as biotin.

Destination and documentation can move the date. A new market, a new label requirement or a customer-specific certificate format adds a review step before the pack is released. If the date is fixed, say so at the quotation stage and put the fixed date into the offer rather than assuming it will hold.

The six details a quotation needs

What to send so a biotin quotation can be complete
DetailWhy it changes the offer
Grade and carrierPure, 1%, 2% or granulated, and the carrier if diluted
Quantity and pack1 kg pouch, 25 kg drum or a multiple of either
Destination and IncotermSets the delivery point, the documents and the transit route
Document setCOA, TDS, SDS, allergen, GMO, origin and any customer format
Label and declaration needsCarrier name, grade name and the language of the pack label
Required dateSeparates a standard release from a date that has to be reserved

A quotation without these six is a starting point, not an offer. The response should come back with the specification, the pack, the lot or allocation basis, the document list, the delivery point and the validity of the quotation. If one of the six is missing, the supplier is guessing, and the guess will surface at the packing list.

Samples and the retained sample

A sample should be drawn from a released lot, carry the same lot code as the offer and be large enough for one bench trial and one repeat. It is not a separate production batch, and it does not reserve a drum. The sample is most useful when it is tested with the same methods the production lot will face: identity by IR, assay by HPLC, rotation, loss on drying and a blend trial at the intended inclusion.

Keep a portion of the sample sealed and labelled. If a later drum is disputed, the retained sample is the reference that shows what the qualification was based on. The sample and the production lot should be traceable to the same manufacturing site, even when they are different lots.

Terms that belong in the offer

The commercial terms and the quality terms should be in the same document. The offer should state its validity, the Incoterm, the payment term, the document set, the agreed specification and the window for rejecting a non-conforming pack. It should also say what happens to the retained sample and how a re-test or a return is handled.

“MOQ 1 kg” is a statement about the smallest pack, not a statement about the smallest commercially interesting order. A customer who needs 25 kg should still see the 1 kg option as the qualification step, and a customer who orders 1 kg should still receive the same certificate discipline as the drum. The minimum is there to make the first lot traceable, not to make the first order trivial.

The catalog pack sizes and lead time sit on the biotin product page. The grade decision is on the grade page, the certificate lines on the COA page, the document set on the compliance page and the release workflow on the quality page. The ordering terms are defined in the MOQ and lead-time entries.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation