02 Grade comparison

Powder, fine powder or oil dispersion: choosing an ascorbyl palmitate grade

Technical document 02 · Reviewed 2026-11-20 · Ascorbyl Palmitate

On this page
  1. Why this ester has grades at all
  2. The forms side by side
  3. Particle size, flow and the melt
  4. Dose arithmetic by format
  5. What to write into the specification
  6. When another form is the wrong choice

Ascorbyl palmitate is one chemical entity, CAS 137-66-6, so its grades are physical rather than chemical: the standard 80 mesh powder, a finer cut, an oil dispersion or a diluted blend. The catalogue form is the 80 mesh powder; the others are made to order and each changes the particle line, the assay per gram or the carrier. Ascorbyl stearate is not a grade at all — it is the C18 ester, a different product with its own CAS number.

In one line

The chemistry is fixed by CAS 137-66-6; the grade question is the physical form, the particle size and whether the powder is dispersed in oil before it reaches the formula.

Why this ester has grades at all

The ester melts at 107–117 °C and does not dissolve in water. In a capsule or a tablet it has to flow and fill; in an oil blend or a softgel fill it has to dissolve without a long heat step; in a dry mix it has to stay evenly distributed. Those are three different physical jobs, and one 80 mesh powder does not do all three equally well.

A second reason is the dose. A formula that uses the ester as a small antioxidant addition and a formula that uses it as the vitamin C source need very different amounts per gram of finished product. A diluted blend can help the first; the pure powder suits the second. The grade is a handling decision before it is a commercial one.

The forms side by side

Physical forms of ascorbyl palmitate and the neighbouring ester
FormWhat it isTypical useWhat changes
Standard powder≥95% through 80 meshCapsules, tablets, oil blendsThe catalogue form; lot code on pouch and drum
Fine powderA finer cut, agreed on requestFaster dispersion in oilParticle profile and flow
Oil dispersionEster dispersed in a carrier oilSoftgel fill, oil-based blendsAssay per gram follows the carrier
Diluted blendEster on a carrier, agreed on requestLow-dose antioxidant useCarrier must be declared
Ascorbyl stearateC18 ester, CAS 25395-66-8Not a substituteDifferent melting point and label name

The first four rows are formats of the same material. The last row is a different substance: ascorbyl stearate is E 304 (ii), C24H42O7, molecular weight 442.6, and it melts around 116 °C. A supplier who ships stearate against a palmitate order has changed the ingredient, not the grade.

Particle size, flow and the melt

The catalogue cut is ≥95% through 80 mesh. That is a finishing specification: it says how the powder passes a sieve, not how it behaves in a blender. Flow, dust and segregation depend on the particle-size distribution and on the bulk density, and a change of mill can move all three while the certificate still reads 95% through 80 mesh.

The melting range matters in the plant as well as on the certificate. A formulator who melts the ester to dose it as a liquid puts the material at 107–117 °C; that is a heat load the powder would not otherwise see, and the oil phase then has to be cooled. Dissolving the ester in warm oil at the process temperature is the gentler route, but the solubility at that temperature has to be measured, not assumed.

The ester is insoluble in water and soluble in fats and in organic solvents such as ethanol. That property decides the dosage form: an aqueous stick pack would carry the powder as a suspension, not a solution, and a clear drink is not a format for this material.

Dose arithmetic by format

The vitamin C equivalent is 42.5% of the ester mass: 176.12 ÷ 414.53 = 0.4249. A label that declares 100 mg of vitamin C from ascorbyl palmitate therefore needs about 235 mg of the ester, and a 500 mg dose of the ester supplies about 212 mg of vitamin C equivalent.

Those figures decide the format. A 100 mg vitamin C dose needs 235 mg of ester, a fill that a two-piece capsule can meet; a 500 mg vitamin C dose needs 1,177 mg of ester, which no single capsule holds, so the dose moves to a softgel fill or to a divided serving. A tablet is possible, but the dose per tablet is small and the powder is hydrophobic, so the granulation has to wet it.

When the ester is used as an antioxidant rather than as the vitamin source, the amount is a fraction of the oil or fat mass, set by the recipe and by the destination text for the additive. That is a different scale from the nutrient dose, and the two uses should not be mixed in one declaration.

What to write into the specification

  • “L-Ascorbyl palmitate, CAS 137-66-6, C22H38O7, molecular weight 414.53.”
  • “Assay ≥95.0% by HPLC, on the dried basis; loss on drying ≤1.0%.”
  • “Identification by HPLC retention and IR; melting range 107–117 °C.”
  • “Particle size ≥95% through 80 mesh; heavy metals and microbiology as listed.”
  • “Physical form: powder, fine powder, oil dispersion or diluted blend, as agreed.”
  • “Carrier and assay per gram stated for any dispersion or blend.”

We supply the standard powder. A finer cut, an oil dispersion or a diluted blend is a separate specification with its own particle line and, for the blend, its own carrier declaration.

When another form is the wrong choice

If the formula is aqueous and clear, this material is the wrong choice at any grade: it does not dissolve in water, and no particle size changes that. If the label names the ester as the vitamin C source, a diluted blend makes the label arithmetic harder, because the declared vitamin C has to be calculated from the assay per gram of the blend. If the dose needs a large amount of vitamin C in a small capsule, the 42.5% conversion is the constraint, and no grade removes it.

A switch between formats needs a new specification, a stability check in the new matrix and a label review. The product hub carries the catalogue specification; the level-four comparison sets the ester against ascorbic acid; the stability page covers the heat and light load; the COA page shows how the form is reported; the methods library explains the assays; the vitamin C hub covers the acid.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation