Vitamins & Cofactors · Core range

Vitamin C

C₆H₈O₆ · CAS 50-81-7 · L-ascorbic acid, crystalline

L-ascorbic acid specified at 99.0–100.5% by iodometric titration, for capsules, tablets, powder sticks and beverages where the label needs a defined vitamin C form.

Assay (as C₆H₈O₆)
99.0–100.5%
Minimum order
1 kg
Indicative lead time
1–7 days
Standard packing
1 kg foil pouch25 kg fiber drum

Specification

What the certificate will report

Assay (as C₆H₈O₆)99.0–100.5% (iodometric titration)
AppearanceWhite to off-white crystals or crystalline powder
IdentificationIR and UV conform
Specific rotation+20.5° to +21.5° (10% solution)
pH (5% solution)2.1–2.6
Loss on drying≤0.5%
Residue on ignition≤0.1%
Oxalic acid≤0.2%
Iron / copperFe ≤2 ppm · Cu ≤5 ppm
Heavy metalsPb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg
MicrobiologyAPC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent
Chemical formulaC₆H₈O₆
CAS50-81-7
Marker setL-ascorbic acid (99.0–100.5%), E300
AppearanceWhite to off-white crystals or crystalline powder
SolubilityFreely soluble in water; the 5% solution is acidic (pH 2.1–2.6).

Primary method Iodometric titration and HPLC — the method behind each figure matters as much as the figure. How the COA is built →

What to confirm before ordering

  • Confirm the form: ascorbic acid, sodium ascorbate and coated ascorbic acid are different label ingredients with different pH behaviour.
  • Ask for the assay method and the oxalic acid figure; iodometric titration is standard, but the impurity panel separates grades.
  • Light, heat, moisture and trace metals drive oxidation; the pack and the blend matter as much as the assay.
  • E300 is a food-additive identity; a supplement label may use the vitamin name instead. Confirm the market's labelling rule.

Buyer questions

Practical answers

What is Vitamin C specified to?

Assay (as C₆H₈O₆): 99.0–100.5% (iodometric titration). The full specification adds Appearance, Identification, Specific rotation, pH (5% solution), Loss on drying and the contaminant panel. Every figure on the batch COA is reported with the method used to produce it.

Is this ascorbic acid or a salt?

The catalog grade is L-ascorbic acid, not sodium ascorbate or calcium ascorbate. The form decides the pH, the taste and the label name; the grade comparison page sets out the alternatives and what changes when you switch.

Which dosage forms does this grade fit?

Capsules and tablets, Powder sticks and drink mixes, Functional beverages, Gummies and chews. The grade is selected against the dosage form and the target dose: capsule fill and tablet flow depend on bulk density and particle size, while a stick pack or gummy depends on dissolution and taste.

Which documents are supplied with the batch?

A batch-specific COA, TDS, SDS, allergen and GMO statements, an origin record and a residual-solvent statement. Third-party heavy-metal or microbiological reports can be arranged, and the specification comparison is issued before the first order.

What is the minimum order and lead time?

1 kg minimum, packed in a 1 kg foil pouch from a released lot; 25 kg fiber drums are available as quantities scale. 1–7 days after specification and order confirmation. Samples are typically 100–500 g and carry the COA of the lot they were drawn from.

Documentation

Released with every lot

  • Batch-specific certificate of analysis against the agreed specification
  • Technical data sheet with form, CAS or species, carrier, storage and packing
  • Safety data sheet in the 16-section format
  • Allergen, GMO and origin statements signed for the batch
  • Residual-solvent statement for the crystallisation system
  • Specification comparison against the specification you sent

What this page does not claim

Vitamin C is sold as an ingredient powder. No therapeutic or disease claim is made here, and no finished dosage form is offered. In the EU, claims for the nutrient or ingredient are restricted to the authorised list; in the US, structure/function statements are the responsibility of the brand that makes them and require substantiation. We publish specification, method, form and documents — that is the boundary of what we write.

Next step

Send the spec. We will confirm the form.

A competitor COA, a label claim or a target dose is enough to start. We reply with the grade we can release, the documents behind it and the questions we still need answered.