04 MOQ & ordering

Ascorbyl palmitate MOQ: packs, lead time and the quotation

Technical document 04 · Reviewed 2026-11-20 · Ascorbyl Palmitate

On this page
  1. Why the floor is 1 kg
  2. Packs and formats
  3. Scheduling and handover
  4. Six details a quotation needs
  5. A sample has to be traceable
  6. What to settle before the first order

The order minimum for ascorbyl palmitate is 1 kg, and the 1 kg foil pouch is the unit that carries it; the bulk unit is a 25 kg fiber drum. Standard powder is quoted at 1–7 days from confirmation. Six details make a quotation firm: the ester and CAS number, the assay basis and physical form, the quantity and pack, the destination and Incoterm, the document set, and the intended use and market.

In one line

The minimum is 1 kg because a smaller quantity would be split from a bulk lot and lose the pack, the lot code and the retained sample that make a trial repeatable.

Why the floor is 1 kg

A kilogram is enough for a bench trial, a retained sample and an outside identity check, and it moves as a parcel without a pallet. More importantly, it is a released pack with its own lot code: material used in the trial can be traced to the same release as material used in production.

Anything smaller is usually split out of a bulk lot, repacked and given a fresh handling record. The chemistry is unchanged, but the pack identity is not, and a trial that cannot be tied to a released lot is difficult to defend. The drum lowers handling per kilogram at the cost of more inventory held. The floor is set by the pack, not by a volume target.

Packs and formats

What ascorbyl palmitate is packed in, and the formats made to order
Pack or formatNet weightTypical useNotes
Foil pouch1 kgTrials and small batchesBarrier to light and moisture; close it after opening
Fiber drum25 kgFull productionLiner inside; lot code on drum and liner
Oil dispersionAgreedSoftgel fills, oil blendsCarrier and assay per gram declared
Fine powderAgreedQuicker wetting in oilParticle distribution changes
Diluted blendAgreedLow-dose antioxidant workCarrier named in the specification

The catalogue material is an 80 mesh powder, with at least 95% passing the sieve. A finer cut, a dispersion or a blend is a new specification rather than a packing option, because each moves the particle result or the assay per gram. Tell us which one the formula needs before the quotation, since the choice can change the schedule.

Scheduling and handover

Standard powder is scheduled at 1–7 days after the order is confirmed. The window covers picking, paperwork and handover to the carrier; transit, customs and the buyer's own release sit outside it. A made-to-order dispersion or blend needs longer, and the offer should say so.

Get the dispatch date in writing, not just the window. A pouch usually moves as a parcel and a drum on a pallet; the Incoterm settles who books freight and who clears entry. Lot documents should travel with the consignment, not arrive after it.

Six details a quotation needs

  1. Product and form. The ester, CAS 137-66-6, and whether the pack is powder, dispersion or blend.
  2. Specification. Assay basis, loss on drying, melting range, particle cut, metals and microbiology.
  3. Quantity and pack. Pouch, drum, or a format made to order.
  4. Destination and Incoterm. Country, delivery point and trade term.
  5. Documents. COA, specification, TDS, SDS and any statement the importer needs.
  6. Use and market. Additive or vitamin source, and where the finished product will be sold.

Without the use and the market, a quotation cannot be checked against the destination file. The commercial terms belong on the offer, not on this page.

A sample has to be traceable

The 1 kg pouch is the pack you qualify on. Check identity, assay, moisture, melting range and microbiology before scaling up, and hold back material from that same pouch. The lot code should be the same on the sample, the certificate and the offer. A sample with no lot behind it says nothing about production.

If a bench trial needs less than a kilogram, it is a split from a bulk lot with its own handling record, not the catalogue pouch. Put the split in writing and file its lot code with the trial results.

What to settle before the first order

The offer should carry the commercial and quality terms together: Incoterm, pack, dispatch window, specification revision, a certificate per lot, the retained sample, the retest period and the change route. A quality agreement signed before the first production order is easier than the same discussion after a dispute.

When a lot fails the agreed specification, the evidence is the retained sample and a joint re-test by the named method, not a photograph of the drum. Name the referee laboratory and the party that pays for it in the agreement. A return argued from appearance alone is difficult to sustain for either party.

The product page holds the catalogue specification. Release tests are on the COA page, the destination file on the compliance page and the retest period on the stability page. The glossary entry defines MOQ, and the logistics page covers freight and documents.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation