03 Stability

Urolithin A is light-sensitive; the pack and the matrix decide the shelf life

Technical document 03 · Reviewed 2026-11-19 · Urolithin A

On this page
  1. The powder in its pack
  2. Suspensions and drink mixes
  3. What shortens the shelf life
  4. A stability protocol
  5. The matrix decides more than the molecule
  6. Assigning the shelf life

Urolithin A is a light-sensitive phenolic lactone, and its shelf life is set by the pack and the matrix as much as by the molecule. A sealed 1 kg foil pouch or 25 kg fiber drum keeps the powder dry and dark; a stick pack, a suspension, a tablet or a gummy exposes it to light, oxygen, moisture and pH. The catalog specification does not carry a shelf life. The stability file for the pack and the matrix does.

In one line

The molecule is stable enough in a sealed, dark pack; the shelf life is lost at the interfaces — light, moisture, oxygen and matrix pH.

The powder in its pack

In the dry state, low water activity and a dark pack are the two protections. The catalog limits — loss on drying ≤1.0%, off-white to yellow powder, ≥95% through 40 mesh — describe the starting point, not the storage condition. A foil pouch with a heat seal keeps moisture and light out; a fiber drum with a liner does the same at 25 kg scale. The closure is part of the barrier: a drum that is opened and resealed in a humid room is no longer the pack that was qualified.

Storage belongs in the specification as a sentence, not a footnote: keep the pack sealed, cool, dry and protected from light. A clear container on a sunlit shelf is the opposite of that condition, even if the powder inside still passes assay at the start. The pack and the storage statement are the first two lines of the stability file.

Suspensions and drink mixes

Urolithin A is sparingly soluble in water; a drink mix is usually a dispersion, not a true solution. That changes the failure modes. A dispersion can settle, re-disperse unevenly and expose a large surface to dissolved oxygen. In a clear bottle, light reaches the particles directly. The pH of the drink, the temperature of the process and the time between mixing and drinking all belong in the test plan.

The lactone ring is the pH-sensitive part of the molecule. At high pH the ring can open, and the open form has different solubility and different chromatographic behaviour. That is a risk to test in the intended matrix, not a reason to avoid every beverage. Test the finished drink at its real pH, in its real pack, for assay and appearance over the intended shelf life. A result from the powder alone does not answer the question.

What shortens the shelf life

Stability factors · what to test in the pack and in the matrix
FactorWhat it can changeTest
LightColour shift, assay lossPhotostability in the proposed pack
HeatAssay loss, colour, related substancesAccelerated temperature condition
OxygenOxidation of the phenolic groupsSealed versus open pack; headspace
MoistureCaking, loss on drying, hydrolysisHumidity challenge; water activity
pHLactone ring, solubility, dispersionAssay across the matrix pH range
MatrixWater activity, carrier, other ingredientsFinished-product stability

Light and moisture are the two factors the pack can control directly. Heat and oxygen are controlled by the process and the headspace. pH and matrix are formulation decisions. A stability failure usually belongs to one of these six lines, and the first step is to identify which one moved.

A stability protocol

A workable protocol is modelled on ICH Q1A(R2): long-term storage at 25 °C and 60% relative humidity, an intermediate condition at 30 °C and 65% relative humidity, and an accelerated condition at 40 °C and 75% relative humidity. Photostability follows the option in ICH Q1B that exposes the sample in the proposed pack. These are drug-substance conventions borrowed for an ingredient; they are a sensible starting grid, not a legal requirement for a food ingredient.

Test at 0, 3, 6, 9, 12, 24 and 36 months, and at the accelerated timepoints the protocol defines. The panel should include assay, related substances, loss on drying, appearance, particle size where flow matters, and microbiology at the end of the period. Use the proposed pack, filled to the proposed net weight, because a 20 g sample in a 1 kg pouch tests a different headspace-to-product ratio.

One production batch is a start; three batches give a trend. Bracketing by pack size is acceptable when the smaller and larger packs share the same materials and the same seal. A protocol is a plan, not a result: it does not become a shelf life until the timepoints have been read and the trend has been evaluated against the specification.

The matrix decides more than the molecule

A capsule is a low-water-activity environment, but the shell can donate or pick up moisture, and a two-piece capsule is not a hermetic pack. A tablet adds compression heat, a lubricant and a binder; a granulated pure grade may run better than a fine powder, but the granulation aid becomes part of the matrix. A stick pack has a large surface-to-volume ratio and a foil laminate that must be chosen for light and moisture, not only for print.

A gummy is the hardest matrix: water activity, pH, heat and the sugar system all interact, and the dosage form itself may limit how much powder can be carried. A suspension adds settling, preservative and a clear or translucent pack. In each case the question is the same: what does the assay read after the matrix has been through its own process, and what does it read at the end of the intended shelf life?

Assigning the shelf life

A shelf life is a conclusion from data, not a property of the molecule. It belongs to a pack, a matrix and a storage condition. The catalog does not state one, and a supplier should not print a number that its stability file does not back. If the file covers 24 months in the 1 kg pouch, that figure does not automatically transfer to a 25 kg drum, a stick pack or a gummy.

Decide between a retest period and an expiry date. A retest period suits a raw material that is assayed before use; an expiry date suits a finished product that cannot be re-tested. Write the storage statement on the label, and keep the transport excursion in the file: a container left on a dock in summer is a stability event even if the certificate was issued in winter.

The packaging options are on the MOQ page; the parameters that move during storage are on the COA page; the destination-market label rules are on the compliance page. The quality page shows how the stability file joins the lot file, and the product hub carries the catalog specification.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation