Specialty Nutrients · Specialty
Urolithin A
C₁₃H₈O₄ · CAS 1143-70-0 · Urolithin A, powder
Urolithin A specified at 98.0–102.0% by HPLC, for markets and uses where urolithin A is lawfully permitted; the authorization status of the destination market is part of the specification.
- Assay (HPLC)
- 98.0–102.0%
- Minimum order
- 1 kg
- Indicative lead time
- 1–7 days
- Standard packing
- 1 kg foil pouch25 kg fiber drum
Specification
What the certificate will report
| Assay (HPLC) | 98.0–102.0% |
|---|---|
| Appearance | Off-white to yellow powder |
| Identification | HPLC and NMR conform |
| Loss on drying | ≤1.0% |
| Residual solvents | Methanol ≤3,000 ppm |
| Heavy metals | Pb ≤1 · As ≤1 · Cd ≤1 · Hg ≤0.1 mg/kg |
| Microbiology | APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent |
| Particle size | ≥95% through 40 mesh |
| Chemical formula | C₁₃H₈O₄ |
| CAS | 1143-70-0 |
| Marker set | Urolithin A 98.0–102.0% (HPLC) |
| Appearance | Off-white to yellow, free-flowing powder |
| Solubility | Sparingly soluble in water; soluble in dimethyl sulfoxide. |
Primary method HPLC — the method behind each figure matters as much as the figure. How the COA is built →
Technical documentation
Six documents, one standard.
Quality, procurement and regulatory pages for Urolithin A. Each card opens the full document; a sample COA and the technical data sheet are available on request.






What to confirm before ordering
- Confirm the destination market and the specific authorization before quoting; urolithin A is a novel food in some markets and not in others.
- Ask for the assay and the residual-solvent profile; the purity of the lot is the starting point, not the regulatory answer.
- Urolithin A is light-sensitive; the pack and the process exposure belong in the specification.
- Do not use the page as a label or a claim: the finished product's status is a separate legal question.
Buyer questions
Practical answers
What is Urolithin A specified to?
Assay (HPLC): 98.0–102.0%. The full specification adds Appearance, Identification, Loss on drying, Residual solvents, Heavy metals and the contaminant panel. Every figure on the batch COA is reported with the method used to produce it.
Which form of Urolithin A is this?
The catalog grade is Urolithin A, powder. Other salts, hydrates, carriers and particle sizes are separate specifications; the grade page compares the alternatives and explains what changes in the label, the assay and the fill weight.
Which dosage forms does this grade fit?
Capsules and tablets, Powder sticks and drink mixes. The grade is selected against the dosage form and the target dose: capsule fill and tablet flow depend on bulk density and particle size, while a stick pack or gummy depends on dissolution and taste.
Which documents are supplied with the batch?
A batch-specific COA, TDS, SDS, allergen and GMO statements, an origin record and a residual-solvent statement. Third-party heavy-metal or microbiological reports can be arranged, and the specification comparison is issued before the first order.
What is the minimum order and lead time?
1 kg minimum, packed in a 1 kg foil pouch from a released lot; 25 kg fiber drums are available as quantities scale. 1–7 days after specification and order confirmation. Samples are typically 100–500 g and carry the COA of the lot they were drawn from.
Documentation
Released with every lot
- Batch-specific certificate of analysis against the agreed specification
- Technical data sheet with form, CAS or species, carrier, storage and packing
- Safety data sheet in the 16-section format
- Allergen, GMO and origin statements signed for the batch
- Residual-solvent statement for the crystallisation system
- Specification comparison against the specification you sent
What this page does not claim
Urolithin A is sold as an ingredient powder. No therapeutic or disease claim is made here, and no finished dosage form is offered. In the EU, claims for the nutrient or ingredient are restricted to the authorised list; in the US, structure/function statements are the responsibility of the brand that makes them and require substantiation. We publish specification, method, form and documents — that is the boundary of what we write.
Next step
Send the spec. We will confirm the form.
A competitor COA, a label claim or a target dose is enough to start. We reply with the grade we can release, the documents behind it and the questions we still need answered.