The regulatory file for PQQ free acid
PQQ free acid is the material with CAS 72909-34-3, and every document in the file should say so. The EU novel-food entry, as of this review, describes the disodium salt rather than the free acid, so the disodium citation should not be assumed to cover the free acid. The destination route for the free acid is for the buyer's regulatory team to confirm.
The disodium entry does not travel with the free acid: the file names the form, the destination and the basis for the finished product.
What the file has to hold
The folder has four parts: the specification version that applies to the free acid, the lot certificate, the destination requirements for limits and labelling, and the change-control record for source, process and pack. The certificate speaks for one lot, the TDS defines the specification and the SDS is about handling; none of the three establishes the market route.
The importer will also want statements on allergens, GMO status, origin, residual solvents where relevant and sodium. A missing statement is easier to obtain before the order than after the container arrives. Put a dated contents list at the front of the folder so a reviewer can see what is present and which version is current.
European Union
In the EU, the PQQ novel-food entry names the disodium salt, limits its use to adult food supplements and attaches a specification and a daily maximum. The free acid is a different form, and a higher assay or a similar colour does not bring it inside that entry. Whether any route is available for the free acid is a question for the buyer's regulatory team, and the current consolidated text should be read before the label is set.
Labelling, general food law and contaminant rules apply in addition to the novel-food route. The EU notes gather the reference texts.
United States
In the US, the file turns on the dietary-ingredient status of the exact form and on the basis the supplier cites. A basis that was developed for the disodium salt does not automatically describe the free acid, and the buyer should check that it reaches the finished product and the intended claim. A structure/function statement needs substantiation and the DSHEA disclaimer; a disease claim is not available.
United Kingdom
Great Britain and Northern Ireland do not share one route. GB uses its own register and labelling rules; Northern Ireland remains under the EU framework, including the disodium entry. The delivery address determines which one applies, and the buyer should record the decision with the order.
Limits and contaminants
The figures below are the catalog release limits for the material. They are not automatically the finished-product limits: the destination text and the daily dose determine that, and the lot result has to be carried through the dose calculation.
| Parameter | Catalog limit | Evidence to keep |
|---|---|---|
| Lead (Pb) | ≤3 mg/kg | Result, method and the finished-product calculation |
| Arsenic (As) | ≤2 mg/kg | Result and method |
| Cadmium (Cd) | ≤1 mg/kg | Result and any category exception |
| Mercury (Hg) | ≤0.1 mg/kg | Result and method |
| Sodium | Reported, not a catalog limit | The measured figure and its method |
Each metal needs a separate result. A combined figure is not usable for a finished-product calculation, and it can hide the element closest to its limit. Sodium is not a catalog limit, but the file should carry the measured value because it is the evidence for the form.
Claims and the label name
The name on the panel is part of the compliance question. “PQQ” does not distinguish the free acid from the disodium salt, and the market file applies to a specific form. The EU entry designates the disodium salt; the US Supplement Facts box carries the dietary-ingredient declaration. Either way, the name should match the form the file covers.
No disease claim is available in either market. Mechanism language is not an authorisation, and US structure/function text needs substantiation and the DSHEA disclaimer. A sodium-free statement is a separate decision based on the measured sodium, the serving size and the local threshold; the words “free acid” do not establish it.
The document set
The folder should contain the COA with the HPLC assay and its basis, the UV identity, moisture, metals and micro, plus sodium by ICP-OES where the form is in question. Add the specification, TDS, SDS, allergen and GMO statements, origin and residual-solvent statements. The product page publishes the catalog specification; the disodium page is a different material with a different file.
Pre-order checklist
- The specification, CAS number and form agree across the file.
- The certificate gives the assay basis and a sodium result.
- COA, TDS, SDS, allergen, GMO, origin and solvent statements are present.
- Label wording and claims have a destination review on file.
- Metal results are expressed against the finished-product dose.
- Source, process and pack are covered by change control.
- Quotation, specification and certificate are the same revision.
The quality page describes the release file, the EU notes provide the framework references, and the identity page covers the analytical evidence.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation