02 Grade comparison

NMN purity and salt form: choosing a grade

Technical document 02 · Reviewed 2026-11-19 · NMN

On this page
  1. Why a grade is more than a percentage
  2. The presentations side by side
  3. What changes in the powder
  4. What changes in the dosage form
  5. What the specification has to pin down
  6. When a grade change is the wrong move

The catalog grade is β-NMN free acid at ≥98.0% by HPLC, 40 mesh, with water ≤5.0% and pH 2.0–4.0 in 5% solution. The choices that actually change are the assay basis, the anomer control, the water limit, the particle size and the presentation — powder, granulated or diluted. A higher percentage on a quotation does not make a grade fit the dosage form or the label.

In one line

A grade is a form, a moisture level and an anomer ratio, not a single HPLC number; the label and the dosage form decide which combination fits.

Why a grade is more than a percentage

A grade is a combination of form, assay basis and physical presentation, not a single number. “98%” can mean 98.0% by HPLC area, 98.0% by mass against a standard, or 98.0% of a diluted blend. “β-NMN” is an identity claim about the anomer, not a synonym for NMN. “Free acid” says there is no sodium or potassium counter-ion. “Anhydrous” says the material is not a hydrate. Two quotations that agree on 98% can disagree on all four.

NMN is usually supplied as the free acid, which behaves as a zwitterion: the pyridinium ring carries a positive charge and the phosphate a negative one. The catalog material is that free acid, not a salt. If a supplier offers a sodium salt, the mass basis changes and the label has to say so. The same arithmetic applies to a hydrate: water adds mass without adding NMN, so the assay per gram falls.

The presentations side by side

NMN presentations · what changes when the powder is granulated or diluted
PresentationWhat it isWhat changesFits
40 mesh powderβ-NMN free acid, ≥98.0% by HPLCBaseline flow, dust and solubilityCapsules, sticks, dry blends
GranulatedPowder built into larger particlesFlow, dust and dispersion; the granulation aid must be declaredTablets, high-speed filling
DilutedNMN on a named carrierContent per gram, homogeneity and labelLow-dose capsules, premixes

The table is about presentation, not a hierarchy. A granulated grade is not more pure than the powder; it is easier to run on a tablet press. A diluted grade is not a lower grade; it is a different material with a carrier, and the carrier has to be named on the specification and the label.

What changes in the powder

Particle size is a release line: ≥95% through 40 mesh, which is about 425 µm. That is coarse enough to flow and fine enough to disperse. Granulation changes the size distribution and usually lowers dust; it can also change dispersion and dissolution, so the tablet or capsule process has to be rechecked rather than assumed.

Water is the physical line that matters most. NMN is hygroscopic, and a powder near the top of the water limit has less headroom in a humid dose room. The certificate should state whether the material is the anhydrous free acid or a hydrate; the water result is the practical check. pH 2.0–4.0 is a solution property; it does not describe the dry powder. A granulated or diluted grade can have a different pH if the process adds an acidic or alkaline component.

What changes in the dosage form

Dosage form and the grade to start with
Dosage formGrade to start withWhy
Capsules40 mesh powder or granulateFlow and fill-weight control
TabletsGranulatedFlow, compaction and low dust
Powder sticks40 mesh powder or granulateDispersion and low water
Drink mixes40 mesh powderSolubility; the 5% solution is acidic

The dosage form also sets the water limit and the metal panel. A stick pack has a small headspace and a single serving; a 25 kg drum is opened repeatedly. The same grade can be right for both, but the pack and the opening cycle are part of the choice.

The label follows the grade. If the label says β-NMN 98%, a diluted grade does not support that line without recalculating the content. If the label says “NMN” and the specification says β-NMN, the label is less specific than the file; that is a decision for the brand, not a default.

What the specification has to pin down

Catalog lines and the lines that change with the grade
LineCatalog specificationIf the grade changes
Identityβ-NMN by HPLC and 1H NMRSame identity, new spectrum
Purity≥98.0% by HPLCState area % or mass basis
Anomerβ/α ratio by NMR, reportedAgree a limit and a method
Water≤5.0% by Karl FischerTighter for stick packs
pH2.0–4.0 at 5%Re-test if the process adds acid or alkali
Particle size≥95% through 40 meshNew sieve result for a granulate
PresentationPowderGranulate or dilution named

An order that names only “NMN 98%” still leaves the anomer, the water and the presentation unresolved. The line that matters for a β claim is the anomer ratio. The line that matters for a diluted grade is the carrier and the content per gram.

When a grade change is the wrong move

Do not change to a diluted grade while the label says 98% β-NMN; the label needs a new content calculation and a new ingredient declaration. Do not change to a granulated grade without naming the granulation aid and checking the tablet or capsule process. Do not switch from the free acid to a salt without re-basing the assay and the label. And no grade change replaces the regulatory file: the specification and the route are separate.

The catalog specification is on the NMN product page. The certificate lines are explained on the COA page; the storage limits are on the stability page; the comparison with the other nicotinamide nucleoside is on the NMN versus NR page. The lot-release process is set out on the quality page, and the published specifications are in the specification index.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation