06 Identity & adulteration

How we prove a lot is N-acetyl glucosamine

Technical document 06 · Reviewed 2026-11-19 · N-Acetyl Glucosamine

On this page
  1. The identity layers
  2. The rotation and the peak ratio
  3. X-ray diffraction and the solid state
  4. What adulteration looks like
  5. Identity clauses for the specification
  6. Five requests for the supplier

An N-acetyl glucosamine lot is confirmed when the IR and HPLC identity match the reference, the specific rotation is +40.0° to +43.0° on the dried basis, the assay is 98.0–102.0% by HPLC, and the loss on drying closes the mass balance. The rotation is the line that separates NAG from glucosamine hydrochloride, which rotates at +70.0° to +73.0°. An assay percentage on its own does not prove which amino sugar is in the pack.

In one line

No single number identifies NAG: the IR and HPLC results name the molecule, the rotation excludes glucosamine, and the moisture figure accounts for the rest of the powder.

The identity layers

A correct name on a certificate is a claim, not a measurement. Each of the five checks below answers a different question and needs its own evidence; the first line alone only shows that the paperwork exists.

Five checks behind an N-acetyl glucosamine identity
CheckQuestionMethodEvidence supplied
DocumentDoes the certificate give the CAS number and the source?Certificate and specificationThat the paperwork exists
InfraredDoes the spectrum show the amide and hydroxyl pattern of NAG?IR against a reference spectrumThe functional groups
ChromatographyIs the main peak NAG, and how pure is it?HPLC retention and peak purityThe molecule and its related substances
PolarimetryIs it the D-form, and is it NAG rather than glucosamine?Specific rotation on the dried substanceOptical form and structural family
Mass balanceHas the powder been diluted?Assay, loss on drying, impuritiesWhether the numbers agree

The rotation and the peak ratio

The specific rotation is a dried-basis figure, and it is the most useful single check against a glucosamine substitution. NAG rotates at +40.0° to +43.0°; glucosamine hydrochloride rotates at +70.0° to +73.0°. A lot that is mostly glucosamine cannot sit inside the NAG range, and a blend of the two lands between them in proportion to the mixture. The sample must be dried and the basis stated, because residual water pulls the angle down.

Two amino sugars on the identity lines
PropertyN-Acetyl glucosamineGlucosamine hydrochloride
CAS number7512-17-666-84-2
Molecular weight221.21215.63
Specific rotation (dried basis)+40.0° to +43.0°+70.0° to +73.0°
Acetyl groupOne N-acetyl group, about 19.5% of the molecular massNone
Assay98.0–102.0% by HPLC as NAG98.0–102.0% on the dried basis as glucosamine

The formula supports the same conclusion. NAG has one nitrogen in a molecule of 221.21, which is 6.33% nitrogen by mass; the acetyl group accounts for about 19.5% of the mass. Those figures are not routine certificate lines, but they explain why an IR spectrum shows an amide band that glucosamine does not have, and why the two molecules behave differently on a reversed-phase column.

Where the HPLC method resolves NAG and glucosamine, the ratio between the two peak areas is the hydrolysis check: a fresh lot should show one dominant NAG peak, and a lot that was held warm or acidic shows a glucosamine peak alongside it. If the method does not resolve them, the ratio cannot be read from that chromatogram and a separate method is needed. The pH of a 5% solution, 3.5–5.0, is a supporting check on the material, not an identity test on its own.

X-ray diffraction and the solid state

X-ray diffraction asks whether the solid is crystalline and whether the pattern matches a reference. A crystalline NAG gives sharp reflections; an amorphous diluent gives a broad halo, so the technique is a useful check against a blended or spray-dried powder. It says nothing about the acetyl group, and it is not a purity assay. Before accepting a match, request the reference diffractogram and the method's detection limit.

For a contested lot, diffraction is strongest when it is read with rotation, IR and HPLC. It is not a routine release test here, and a certificate that says only “XRD conforms” gives the reader no pattern to compare. The method earns its place when the question is solid form or dilution, not when the question is assay. The XRD note describes sample preparation.

What adulteration looks like

Common substitutions and their tell-tale results
SubstituteEffect on the lotTell-tale resultConfirm by
Glucosamine hydrochlorideA white powder with the same sugar backboneRotation above the window; no amide bandPolarimetry, IR, HPLC
Glucosamine sulfateBrings sulfate and a counter-ion into the powderHigh rotation; sulfate or ash foundPolarimetry, ion analysis, HPLC
Maltodextrin or dextroseReduces the NAG content per gramLow assay, low rotation, mass balance adriftAssay, rotation, loss on drying
WaterWater content climbs, so the as-received assay dropsLoss on drying above 1.0%Loss on drying
N-Acetyl galactosamineAn epimer: identical formula and mass, one carbon invertedA shoulder or co-elution; IR nearly identicalHPLC on a resolving column, NMR

Colour is the weakest signal. A dilution can be made white to off-white, so colour proves little. The rotation, the amide band, the chromatographic purity and the mass balance carry the argument. Appearance and assay alone would miss a glucosamine substitution; without a rotation result, the most probable adulterant goes untested.

Identity clauses for the specification

  • Name: N-acetyl-D-glucosamine; CAS 7512-17-6; C8H15NO6; molecular weight 221.21.
  • IR spectrum and HPLC retention both match the reference.
  • Optical rotation: +40.0° to +43.0° after drying.
  • Assay by HPLC: 98.0–102.0%, basis declared.
  • Loss on drying ≤1.0%; pH 3.5–5.0 in 5% solution.
  • Origin: shellfish or fermentation, declared on the certificate, with the allergen declaration.
  • Free glucosamine: a limit and method only where the file requires them.
  • Mesh: at least 95% passing 40 mesh, unless a granulate is agreed.

Five requests for the supplier

  1. State the source of this lot, with the species record or the fermentation description.
  2. The IR spectrum and the HPLC chromatogram should be attached to the certificate; the assay number alone is not enough.
  3. Give the rotation result with its temperature and the basis on which it was measured.
  4. State whether the assay is on a dry or as-received basis, and supply the matching moisture result.
  5. Provide a free-glucosamine figure if hydrolysis is a concern, and agree a joint re-test on the retained sample in advance.

Five answers of that kind make an identity file; one assay figure does not. Catalog ranges are on the NAG product page; the COA page shows where each result sits; the grades page compares sources; the level-four page explains the label consequences; the HPLC note covers the separation; the quality page describes the release file.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation