NAG grades: source, particle form and the specification
N-Acetyl glucosamine is sold at one catalog assay range, 98.0–102.0% by HPLC, and the choices that matter around it are the source and the particle form. The source is shellfish or fermentation, and it sets the allergen statement and some of the documentation; the particle form is a 40 mesh powder or a granulate, and it decides flow, fill weight and dust. Neither choice changes the molecule, the CAS number or the assay range.
Source and particle form are the real NAG grade decisions: the catalog assay stays at 98.0–102.0%, while the allergen statement, the flow and the documents change.
Why one molecule still has grade choices
The molecule is fixed: N-acetyl-D-glucosamine, CAS 7512-17-6, C8H15NO6, molecular weight 221.21. What varies is where the material comes from and how it is finished. Shellfish-derived NAG starts from chitin in shrimp or crab shell; the fermentation route builds the same molecule from a microbial process. Both routes end at the same certificate lines, but they do not end at the same paperwork.
The second choice is physical. The catalog form is a powder with ≥95% through 40 mesh, and a granulated form is available on request. A granulate flows faster on a tableting press and generates less dust in a stick-pack line, while a 40 mesh powder disperses and dissolves more quickly in water. The chemistry is unchanged, but the fill weight, the blend time and the dust-control measures are not.
Shellfish-derived against fermentation-derived
| Property | Shellfish-derived | Fermentation-derived |
|---|---|---|
| Starting material | Chitin from shrimp or crab shell | Microbial fermentation |
| CAS number | 7512-17-6 | 7512-17-6 |
| Assay (HPLC) | 98.0–102.0% | 98.0–102.0% |
| Appearance | White to off-white powder | White to off-white powder |
| Allergen statement | A crustacean shellfish declaration may apply | Non-shellfish source; statement supplied per lot |
| Source record | Species, origin and allergen statement | Process, origin and statement on process aids |
| Typical buyer need | Labels and markets that accept a shellfish source | Labels that need a non-shellfish source |
The two sources are not interchangeable at the label level. A brand that has built a shellfish-free position cannot move to the shellfish route without a new allergen review, and a brand that already declares crustacean shellfish still has to confirm that the statement covers this ingredient and this lot. The source is a specification line, not a purchasing detail that can be swapped when stock is short.
Source also affects the paperwork a buyer should expect: a species and origin record for the shellfish route, and a statement on the fermentation organism and process aids for the fermentation route. Neither route removes the need for the allergen assessment of the finished formula, because the excipients, the capsule shell and the processing aids have their own declarations.
Solubility, pH and the granulate
NAG is soluble in water and the solution is slightly acidic: the catalog pH for a 5% solution is 3.5–5.0. That acidity is part of the material, not an impurity, and it matters twice. It sets the taste and the buffer load in a drink mix, and it is the condition under which the acetyl group can hydrolyse if the solution is also held warm. A formulator who adjusts the pH should recheck both the appearance and the free-glucosamine level.
The powder is hygroscopic. The loss on drying limit is ≤1.0%, which is tight enough that an open pouch in a humid room will show it. A granulate can improve flow without changing the molecule, but a granulate made with a binder or a carrier is a different specification: the assay per gram, the label and the particle-size line all move. Ask for the composition of the granulate, not only its mesh.
Bulk density and particle size are finishing properties. A 40 mesh powder and a granulate can meet the same assay, rotation and moisture limits and behave differently in a hopper. The specification should state the form and the mesh, because a certificate that reports only “powder” has not described what will arrive.
Use level and the label
NAG is declared as N-acetyl glucosamine, and its label line states the NAG mass. There is no glucosamine-base conversion to apply: the hydrochloride is 83.1% glucosamine base, while NAG carries an acetyl group and is a different molecule. A formulation that switches from glucosamine hydrochloride to NAG at the same milligram weight has changed the declared ingredient, not the dose.
The use level is set by the brand's label, the destination's rules and the finished-product testing. It is not derived from a glucosamine figure and it cannot be increased to reach one. If a label must declare glucosamine, NAG is the wrong input; if the label declares N-acetyl glucosamine, the weigh-up uses the NAG assay and the NAG mass. The level-four comparison works through the arithmetic.
The dosage form follows the physical grade. A capsule or tablet takes the 40 mesh powder or a granulate; for a stick pack or drink mix, the powder is the practical form because it dissolves; a wet-granulation step adds water and heat, which is the hydrolysis risk described on the stability page. The choice of form belongs to the process, and it should be made before the specification is frozen.
What to write into the specification
- “N-Acetyl-D-glucosamine, CAS 7512-17-6, C8H15NO6, molecular weight 221.21.”
- “Origin: shellfish or fermentation, declared on the certificate, with the allergen declaration.”
- “HPLC assay 98.0–102.0%; the certificate states the basis it used.”
- “Rotation +40.0° to +43.0° after drying; moisture ≤1.0%.”
- “pH 3.5–5.0 for a 5% solution; identity confirmed by IR and HPLC.”
- “Particle size: 95% or more passes a 40 mesh sieve; a granulate is specified separately.”
- “Metals and microbiology as listed; a free-glucosamine limit only if agreed.”
- “Before ordering, the buyer confirms where the material may be sold and by which route.”
When NAG is the wrong ingredient
NAG is the wrong ingredient when the label, the buyer's specification or the destination file calls for glucosamine. Glucosamine hydrochloride and glucosamine sulfate are separate substances with their own CAS numbers, assay bases and dose arithmetic, and they are covered on the glucosamine product page. Substituting one for the other is a change of ingredient, not a change of grade.
It is also the wrong choice when the process cannot keep the powder dry or the solution cool. NAG hydrolyses to glucosamine at low pH or high temperature, so a wet process with a long warm hold is a poor fit unless the free-glucosamine level is measured and controlled. The catalog specification is on the NAG product page; the COA page lists what is tested at release; the compliance page covers source and allergen paperwork.
In this document
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation