02.1 High vs low MW

High vs low molecular weight hyaluronic acid: viscosity, dose and the label

Technical document 02.1 · Reviewed 2026-11-19 · Hyaluronic Acid

On this page
  1. What “high” and “low” actually measure
  2. Viscosity: the same concentration is not the same solution
  3. Dose: the amount that fits the format
  4. The label: ingredient name and the grade claim
  5. Does the grade change the regulatory file?
  6. When to choose which

High and low molecular weight sodium hyaluronate share the same CAS number 9067-32-7 and the same repeat unit, but they are different specifications. At equal solids the high grade is more viscous; the low grade allows more solids at a workable thickness. The choice is settled by the dosage form and the label, not by a general preference.

In one line

High and low molecular weight sodium hyaluronate share a CAS number but not a viscosity, a formulation or a label rationale; the grade is a specification decision.

What “high” and “low” actually measure

Molecular weight describes the length of the polysaccharide chain, and a batch is always a distribution rather than one chain length. The catalog grade on this page is 1.0–1.5 MDa, which is a high-molecular-weight band. A low-molecular-weight grade is typically below 0.1 MDa, with a medium band between the two. Those bands are working descriptions, not a legal classification: a supplier’s “high” may start at a different point, and the figure is only comparable when the method is named.

The assay does not measure the band. A high and a low grade can both report sodium hyaluronate ≥91.0% and glucuronic acid ≥44.0% while behaving differently in water, because the assay counts the polysaccharide mass and the chain length sets the hydrodynamic volume. That is why the certificate needs a molecular-weight result and method beside the assay, not instead of it.

High and low molecular weight sodium hyaluronate at a glance
AttributeHigh molecular weightLow molecular weight
Working band≥1.0 MDa; catalog 1.0–1.5 MDa<0.1 MDa
Viscosity at equal solidsHigherLower
Solids at a workable viscosityLowerHigher
DissolutionSlower; prone to lumpsFaster; easier to clear
Usual formatCapsules, tablets, low-solids sticksHigher-solids drinks and sachets

Viscosity: the same concentration is not the same solution

At the same concentration, the high-molecular-weight chain occupies more hydrodynamic volume and gives a thicker solution. The low-molecular-weight chain occupies less volume, so more of it can be dissolved before the solution becomes difficult to mix, fill or drink. This is the practical trade: the high grade gives thickness with less powder, and the low grade gives a higher solids load without thickness.

Viscosity is not a fixed property of the grade. It depends on concentration, temperature, shear rate and the measurement system. A figure quoted without those conditions cannot be compared with another supplier’s figure or with a previous lot. If viscosity is a release parameter, write it into the specification with the concentration, temperature and spindle or shear rate, and measure it on the same equipment each time.

Dissolution follows the same physics. A high-molecular-weight powder wets slowly and can form a gel layer around a lump, which slows water penetration further. A low-molecular-weight powder wets and dissolves faster, which is why it is easier to use in a small sachet or a clear drink. The 80 mesh particle size helps dispersion, but it does not change the chain length or the final viscosity.

Dose: the amount that fits the format

In this document, dose means the amount of sodium hyaluronate declared per serving, not a therapeutic recommendation. The amount is a formulation choice, and the grade decides how much room the formula has. A high-molecular-weight grade can build a thick solution at a low amount, which suits a small stick; a low-molecular-weight grade can carry a higher amount in the same volume without becoming unpourable.

The capsule and the stick have different constraints. A capsule is a fixed volume of powder, so the grade affects flow and fill weight more than viscosity; a stick is a dry blend that becomes a solution in the consumer’s glass, so the grade affects how quickly it disperses and how thick the drink becomes. A beverage adds clarity and solids to the same decision: a high-molecular-weight grade at a low amount can give a light body, while a low-molecular-weight grade at a higher amount keeps the drink workable.

None of this is a health claim. The dose question is about how much material fits in the unit the customer will use, and how the powder behaves when water is added.

The label: ingredient name and the grade claim

The ingredient name is sodium hyaluronate. “High molecular weight” and “low molecular weight” are specification terms or claims, not a required part of the ingredient name in the EU, the US or the UK. If the artwork carries a grade claim, the batch COA has to support it with a number and a method, and the claim has to be true for the lot on the shelf, not only for the development sample.

The label rules differ by market. In the EU and the UK, the ingredient list and the amount per portion are the core particulars, and a grade claim is a commercial claim that must not mislead. In the US, a grade statement can sit alongside a structure/function claim only if it is truthful and substantiated; it cannot turn into a disease claim. The regulatory team should approve the exact wording before the artwork is ordered. The compliance page sets out the market checks.

Does the grade change the regulatory file?

The CAS number does not change, but the file can. A molecular-weight grade made by a different hydrolysis step is a different production process, and a novel-food determination or authorisation is tied to the process it assessed. The EU fermentation conclusion and the rooster comb extract authorisation are both route-specific; a new process step should be checked against the file rather than assumed to be covered. The UK has its own novel-food register, and Northern Ireland follows the EU route.

Contaminant and microbiology limits do not usually change with molecular weight, but the specification does, and the stability study does. A grade change is a new specification, a new COA review and a new stability set in the intended matrix. The stability page covers the study design; the COA page covers the lines that change.

When to choose which

Choosing between high and low molecular weight sodium hyaluronate
RequirementChoose highChoose low
Thickness at low solidsYesNo
High solids in a small volumeNoYes
Fast dispersion in a stickNoYes
Low-solids capsule or tabletYesPossible, but more powder
Clear, high-solids beverageDifficultYes

Choose the high grade when the formula needs thickness or a low amount of powder, and the process can wet and disperse a slow-hydrating polymer. Choose the low grade when the formula needs a higher solids load, faster dispersion or a clear drink at a workable thickness. If the format sits between the two, a medium band may be the better starting point, but it still needs its own molecular-weight range and method.

A grade switch is not a drop-in substitution. Re-check the specification, the COA, the viscosity at the intended concentration, the stability in the finished pack and the label wording. The parent grade page compares all three bands, the identity page covers the molecular-weight evidence, and the catalog specification is on the product page.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation