Specialty Nutrients · Core range
Hyaluronic Acid Low MW
— · CAS 9004-61-9 · Low-molecular-weight hyaluronic acid, powder
Low-molecular-weight hyaluronic acid specified at ≥95.0% by HPLC with a 20–80 kDa molecular weight window; the molecular weight and the source are the specification.
- Assay (HPLC)
- ≥95.0%
- Minimum order
- 1 kg
- Indicative lead time
- 1–7 days
- Standard packing
- 1 kg foil pouch25 kg fiber drum
Specification
What the certificate will report
| Assay (HPLC) | ≥95.0% |
|---|---|
| Molecular weight | 20–80 kDa (SEC-MALS) |
| Appearance | White to off-white powder |
| Identification | HPLC and IR conform |
| Loss on drying | ≤10.0% |
| Protein | ≤0.1% |
| Heavy metals | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg |
| Microbiology | APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent |
| Particle size | ≥95% through 80 mesh |
| Chemical formula | — |
| CAS | 9004-61-9 |
| Marker set | Hyaluronic acid ≥95.0%; MW 20–80 kDa |
| Appearance | White to off-white, free-flowing powder |
| Solubility | Soluble in water; the solution is clear and viscous. |
Primary method HPLC and SEC-MALS molecular weight — the method behind each figure matters as much as the figure. How the COA is built →
Technical documentation
Six documents, one standard.
Quality, procurement and regulatory pages for Hyaluronic Acid Low MW. Each card opens the full document; a sample COA and the technical data sheet are available on request.






What to confirm before ordering
- Name the grade: low-MW and high-MW hyaluronic acid are different products with different viscosity and use levels.
- Ask for the molecular weight, the assay and the protein; the three are not interchangeable.
- The material is hygroscopic; the pack and the storage condition belong in the specification.
- Do not use the page as a label or a claim: the finished product's status is a separate legal question.
Buyer questions
Practical answers
What is Hyaluronic Acid Low MW specified to?
Assay (HPLC): ≥95.0%. The full specification adds Molecular weight, Appearance, Identification, Loss on drying, Protein and the contaminant panel. Every figure on the batch COA is reported with the method used to produce it.
Which form of Hyaluronic Acid Low MW is this?
The catalog grade is Low-molecular-weight hyaluronic acid, powder. Other salts, hydrates, carriers and particle sizes are separate specifications; the grade page compares the alternatives and explains what changes in the label, the assay and the fill weight.
Which dosage forms does this grade fit?
Capsules and tablets, Powder sticks and drink mixes. The grade is selected against the dosage form and the target dose: capsule fill and tablet flow depend on bulk density and particle size, while a stick pack or gummy depends on dissolution and taste.
Which documents are supplied with the batch?
A batch-specific COA, TDS, SDS, allergen and GMO statements, an origin record and a residual-solvent statement. Third-party heavy-metal or microbiological reports can be arranged, and the specification comparison is issued before the first order.
What is the minimum order and lead time?
1 kg minimum, packed in a 1 kg foil pouch from a released lot; 25 kg fiber drums are available as quantities scale. 1–7 days after specification and order confirmation. Samples are typically 100–500 g and carry the COA of the lot they were drawn from.
Documentation
Released with every lot
- Batch-specific certificate of analysis against the agreed specification
- Technical data sheet with form, CAS or species, carrier, storage and packing
- Safety data sheet in the 16-section format
- Allergen, GMO and origin statements signed for the batch
- Residual-solvent statement for the crystallisation system
- Specification comparison against the specification you sent
What this page does not claim
Hyaluronic Acid Low MW is sold as an ingredient powder. No therapeutic or disease claim is made here, and no finished dosage form is offered. In the EU, claims for the nutrient or ingredient are restricted to the authorised list; in the US, structure/function statements are the responsibility of the brand that makes them and require substantiation. We publish specification, method, form and documents — that is the boundary of what we write.
Next step
Send the spec. We will confirm the form.
A competitor COA, a label claim or a target dose is enough to start. We reply with the grade we can release, the documents behind it and the questions we still need answered.