02.1 HMB vs creatine

HMB vs creatine monohydrate: two ingredients, two labels

Technical document 02.1 · Reviewed 2026-11-20 · HMB

On this page
  1. Two molecules, two chemistries
  2. The specification side by side
  3. Serving arithmetic and the label dose
  4. What each label has to say
  5. Using both in one formula
  6. Substituting one for the other

HMB and creatine monohydrate are different molecules with different assays, different serving arithmetic and different label lines. Calcium HMB is the calcium salt of a leucine metabolite, specified at 98.0–102.0% by HPLC with 12.0–14.0% calcium; creatine monohydrate is specified at 99.0–101.0% by HPLC with limits on creatinine and dicyandiamide. A formula can carry both, but neither can replace the other at the balance or on the panel.

In one line

Two ingredients, two identities: the HMB assay turns on calcium and the creatine assay turns on creatinine, so neither number can stand in for the other on the label.

Two molecules, two chemistries

HMB is 3-hydroxy-3-methylbutyric acid, a small hydroxy acid produced from leucine. The commercial powder is the calcium salt, C10H18CaO6, with two acid molecules for each calcium ion and a molecular weight of 274.32. Creatine is a guanidine compound, methylguanidine acetic acid, supplied as the monohydrate C4H9N3O2·H2O at 149.15 g/mol. One is a hydroxy acid salt; the other is a nitrogen-rich organic acid hydrate.

The elemental difference is analytically useful. Calcium HMB contains no nitrogen, while creatine monohydrate is about 28% nitrogen by mass. A nitrogen determination therefore tells the two apart in a blend, and a certificate that reports nitrogen or a protein factor for an HMB lot has described something other than calcium HMB.

The specification side by side

Calcium HMB and creatine monohydrate
ParameterCalcium HMBCreatine monohydrate
CAS number135236-72-56020-87-7
FormulaC10H18CaO6C4H9N3O2·H2O
Molecular weight274.32 (anhydrous)149.15
Assay98.0–102.0% by HPLC, as the salt99.0–101.0% by HPLC
Second identity lineCalcium 12.0–14.0%Creatinine ≤100 ppm
Process impurityFree acidDicyandiamide ≤50 ppm
NitrogenNoneAbout 28% by mass
Loss on drying≤5.0%≤12.0%, by design for the hydrate
Particle size≥95% through 80 mesh80 or 200 mesh

The two assay figures look similar and mean different things. HMB's 98.0–102.0% is only complete with the calcium line beside it, because the calcium proves the salt. Creatine's 99.0–101.0% is only complete with creatinine and dicyandiamide beside it, because those are what a poor synthesis or a hot drying step leaves behind. A buyer who compares only the headline percentages has compared the least informative line on each certificate.

Serving arithmetic and the label dose

A 3 g serving of calcium HMB carries about 2.5 g of HMB, because the salt is 80.8–86.1% acid by mass depending on the hydrate. The same 3 g also carries 360–420 mg of calcium. A 5 g serving of creatine monohydrate carries about 4.4 g of creatine, because the monohydrate is 87.9% creatine by mass. Those are the quantities used in published research on each ingredient, not recommendations for a finished product.

The serving sizes do not fit the same dosage form. Three grams of HMB salt plus five grams of creatine is eight grams of powder before any excipient, which is a stick pack or a scoop, not a capsule. A capsule product usually carries one of the two, and the label then has a single ingredient to declare.

What each label has to say

The panel names differ: calcium β-hydroxy-β-methylbutyrate for the HMB powder, creatine monohydrate for the other. Writing “HMB” alone leaves the form open, and writing “creatine” alone leaves the form open in a market where hydrochloride, nitrate and other creatine forms are sold. The declared name should match the certificate, not the marketing shorthand.

The calcium line is the label consequence that buyers miss. In the US, 360–420 mg of calcium from a 3 g HMB serving is a material share of the 1,300 mg daily value and must appear in the mineral declaration. In the EU, the same calcium is roughly half of the 800 mg reference intake. Creatine monohydrate contributes no mineral, so a formula that switches between the two changes the nutrition panel even when the active grams are matched.

Claims are reviewed separately from both panels. Words such as recovery, strength and lean mass are claim language in either market, and the substantiation for one ingredient does not transfer to the other.

Using both in one formula

The two powders are physically compatible: both are white, both dissolve in water, and neither is a strong acid or base that would attack the other in a dry blend. The formulation questions sit elsewhere. Calcium HMB is hygroscopic and the calcium can haze a beverage that contains phosphate or citrate; creatine in solution converts to creatinine over time, and heat accelerates the change, so a ready-to-drink has to be validated in its own matrix rather than inferred from powder data.

A dry blend avoids most of that. Both ingredients are milled powders, and a stick pack or a scoop can carry the eight-gram combination with a flow agent if the line can handle the fill weight. Premix uniformity has to be demonstrated for each ingredient, because the two have different particle-size distributions and different bulk behaviour.

Analytically, a combined product needs both panels: HPLC for HMB with the detector named, calcium by titration, HPLC for creatine with creatinine and dicyandiamide. A laboratory set up for one of those methods may not run the other, and a certificate that reports one ingredient has said nothing about the second.

Substituting one for the other

There is no conversion between the two. HMB and creatine are separate dietary ingredients with separate specifications, separate serving sizes and separate label declarations; a formula that swaps one for the other is a new product, not a reformulation of the same one. The change needs a new specification, a new nutrition panel, a new stability study and a new claim review, and the market file for one ingredient does not cover the other.

The HMB product hub carries the calcium salt specification, and the creatine monohydrate page carries its own. The COA page explains how the HMB lines are read, the grades page compares HMB with its free acid, the methods section covers the assays, and the quality page describes release.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation