06 Identity & adulteration

How we prove a gamma-oryzanol lot is the rice-bran ester

Technical document 06 · Reviewed 2026-11-19 · Gamma-Oryzanol

On this page
  1. Four checks, four different claims
  2. The profile, and the acid-to-ester ratio
  3. Melting point, DSC and diffraction
  4. What adulteration looks like
  5. Identity clauses for the specification
  6. Five questions that produce a file

Proving a γ-oryzanol lot means proving a mixture, not a single peak. Four checks do the work: the document names the material and its rice-bran origin, HPLC with UV detection exposes the ester profile, the melting point confirms the solid, and the alcohols released by saponification show which sterols and triterpene alcohols carried the ferulate. A blend can match the assay total without being the same powder, so the total is the last thing to trust rather than the first.

In one line

Identity is a chain of agreeing checks: the chromatogram shows the ester profile, the melting point shows the mixture, and the saponified alcohols show the source.

Four checks, four different claims

Each check answers a question the others cannot, and each has a limit. A supplier who supplies only the first has described a label, not a substance.

What each identity check establishes, and what it cannot
CheckWhat it establishesMethodWhat it cannot show
DocumentIdentity and origin as declaredName, CAS 11042-64-1, rice-bran statementWhether the powder matches the paper
ChromatographyA ferulate ester mixture, and its profileHPLC retention, UV spectrum, peak areasWhich alcohol carries each ferulate
Melting pointThe solid mixture, inside its rangeCapillary method or DSCPurity, or which ester is short
Saponified alcoholsThe sterol and triterpene sourceAlkali hydrolysis, then GCThe profile before hydrolysis

The profile, and the acid-to-ester ratio

The profile is the set of peak areas in the chromatogram, and it is the closest thing this material has to a fingerprint. It shifts with the rice variety, the harvest and the refining step, which is why it can be agreed as a range for a source rather than fixed for all time. A specification that names the principal ester, sets a floor for its share and caps the free acid has described the powder; one that names only 95% has described a total.

The second ratio links the ester to the acid. One ferulic acid unit sits on each ester, so the acid share of the mass depends on the alcohol attached.

Ferulic acid share of the four main esters
EsterAlcohol carriedFerulic acid share of the ester mass
Cycloartenyl ferulateCycloartenol32.2% (194.18 ÷ 602.90)
24-Methylenecycloartanyl ferulate24-Methylenecycloartanol31.5%
Campesteryl ferulateCampesterol33.7%
β-Sitosteryl ferulateβ-Sitosterol32.9%

194.18 ÷ 602.90 = 0.322 for the principal ester, and the figure moves only slightly across the family because the alcohols are of similar size. That number converts a ferulate result into an ester result and back. It is not the assay: a method that integrates every peak at the detection wavelength will count free ferulic acid alongside the esters, which is why the free-acid result belongs on the same page as the profile.

Melting point, DSC and diffraction

Of the three solid-state checks, the melting point is the one to run on every lot. The material is a mixture, so it melts across a window; 135–140 °C is the window, and the observed range is the result. A lot that starts to melt at 128 °C usually has something softer in it, and one that holds to 146 °C often has something higher-melting, which for this family points to free ferulic acid near 170 °C.

DSC sharpens the observation. Onset, peak and the width of the transition are all visible, and a single sharp event reads differently from a broad one. Neither method measures purity; both measure how the solid behaves, which is enough to catch a substitution that the assay total would hide.

X-ray diffraction is the specialist tool. It shows whether the solid is crystalline and whether the pattern matches a reference, and it can compare a new source with an old one. It does not quantify the esters or the alcohols. Read a “diffraction conforms” line as a pointer and ask for the pattern, the reference and the detection limit behind it; for routine release it is more than the specification needs.

What adulteration looks like

Substitutions in the gamma-oryzanol trade, and how each one shows
SubstitutionHow it presentsWhat gives it awayConfirmation
Maltodextrin or silicaWhite, free-flowing, lower ester contentAssay low; melting point low or broadAssay, melting point, ash
Rice-bran oil or waxA softer powder with the odour of the branMelting point below 135 °CMelting point, fat content
Added free ferulic acidA total-ferulate figure that looks strongFree-acid line high; melt high or broadFree-acid HPLC, melting point
Sterols without ferulateSterol content without the UV responseAssay low against the sterol figureHPLC/UV, GC of the alcohols
A single synthetic esterOne peak instead of a profileNo profile ratio; a sharp meltHPLC profile, GC of the alcohols

Dilution is the commonest and the quietest: the powder stays white and free-flowing, and only the assay, the ash and the melting point register it. Added free ferulic acid is the most misleading, because it lifts a total-ferulate figure while leaving the ester content untouched. Both are caught faster by the melting point and the free-acid line than by repeating the assay.

Identity clauses for the specification

  • “γ-Oryzanol, CAS 11042-64-1; mixture of ferulate esters, principal member cycloartenyl ferulate (C₄₀H₅₈O₄); rice bran as the source.”
  • “Assay ≥95.0% by HPLC, with the integrated peaks, the standard and the basis named.”
  • “Ester profile: a floor for the principal ester and a ceiling for free ferulic acid.”
  • “Melting point 135–140 °C, reported as the range observed on the lot.”
  • “Moisture ≤1.0%; heavy metals and microbiology as listed.”
  • “No added free ferulic acid and no carrier above the agreed limit.”
  • “Origin statement for the rice bran, supplied per lot.”

Five questions that produce a file

  1. Which ester peaks does the assay integrate, and which standard is the result calculated against?
  2. Can you provide the chromatogram and the full profile, not just the assay figure?
  3. What is the melting point of this lot, measured and not copied from the specification?
  4. What is the free ferulic acid result, and how was it measured?
  5. Can you provide the saponified alcohol profile by GC, and the origin of the rice bran?

Answers to those five make a file that can be checked; a percentage on its own cannot be checked, and a profile without a melting point leaves the solid unexamined. Specification values are on the product hub; the certificate layout is on the COA page; the profile as a grade choice is on the grades page; the ester-versus-acid question is on the comparison page; the separation is described in the HPLC method note.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation