Gamma-oryzanol: the 1 kg pack, the drum and the quote
Gamma-oryzanol orders begin at 1 kg, which ships as a foil pouch; the bulk option is a 25 kg fiber drum. The standard pack leaves in 1–7 days. To turn an enquiry into a quotation that can be compared, six things have to be on the table: the assay and profile, the pack and quantity, the destination and Incoterm, the documents, the intended use, and the market.
A first order should arrive as a lot with its own certificate, and 1 kg is the smallest pack that supports a sample, a retained portion and a traceable code.
Why 1 kg, and not less
One kilogram is enough for a bench trial, a retained sample and an independent test, and small enough to fly without a pallet. It also carries its own lot code and certificate, so the trial material and the production material can be compared on paper. A smaller quantity is normally a repack from a larger lot: more handling, a broken pack identity and a weaker traceability chain, without changing what the powder is.
The 25 kg drum is the other end. It lowers handling per kilogram and raises the inventory commitment and the storage time. Neither pack is a volume reward; the minimum follows from what can be packed, labelled and traced as one lot.
Packs and what they hold
| Pack | Fill | Where it fits | What to watch |
|---|---|---|---|
| Foil pouch | 1 kg | Bench trial and pilot batches | Reseal after opening; light and moisture barrier |
| Fiber drum | 25 kg | Production | Liner kept closed; lot code on both |
| Granulated powder | On request | Dust control and flow | Particle profile and lead time change |
The pouch is the barrier, and its seal is the weak point. The drum's liner does the same job at bulk scale; keep it closed and keep the drum off a damp floor. Write the opening date on both.
Granulation is a change to the specification, not a packing option: it changes the particle profile and may change the lead time, so it belongs in the quotation. The assay, melting point and moisture lines stay as they are.
From confirmation to dispatch
The 1–7 day window covers picking, the documents and dispatch. Transit, customs and the customer's own release sit outside it. A granulated order or a non-standard pack needs its own estimate, stated separately on the quotation.
Ask for a dispatch date as well as a lead time. Pallet or parcel, the trade term fixes who books the freight and who handles entry clearance, and the documents should be on the same journey as the lot rather than following it.
Six items for a comparable quotation
| Item | What to state |
|---|---|
| Product and profile | γ-Oryzanol, CAS 11042-64-1, 95% powder; principal ester share and free-acid limit if a profile is agreed |
| Specification | Assay method and basis, melting point, moisture, heavy metals and microbiology |
| Quantity and pack | 1 kg pouch or 25 kg drum; granulated on request |
| Destination and Incoterm | Country, port or address, trade term |
| Documents | COA, specification, SDS, origin statement and any market declaration |
| Use and market | Supplement, food or other use; the country of sale |
Without the market, a quotation cannot be checked against the regulatory file. Commercial terms are not published on this page; they are set out in the offer.
The sample is a lot
The 1 kg pouch is the qualification sample. Run the HPLC profile and the melting point first, then assay, moisture and microbiology, and keep a retained portion from the same pack. The lot code should read the same on the sample, the certificate and the quotation; if it does not, the sample proves nothing about the drum.
A smaller bench quantity is a repack and should be documented as one. It is a reasonable request, but it is not the catalog pack, and it does not promise that the production lot will share its profile.
What to settle before the purchase order
Alongside the commercial terms, agree the quality terms: which specification revision applies, what the certificate must contain for each lot, how the retained sample is kept, the retest period and the route for a change of source or process. Putting those in a quality agreement before the first production order is easier than resolving them after a dispute.
If a lot fails the agreed specification, the retained sample and a shared re-test are the way to resolve it, not a photograph. Decide in advance who pays for the referee laboratory and which laboratory both sides accept.
Specification values are on the product hub; the release tests are listed on the COA page; market documents are on the compliance page; the term itself is defined in the MOQ glossary entry; shipping documents are covered on the logistics page.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation