02.1 Citicoline vs Alpha-GPC

Citicoline vs Alpha-GPC: two choline forms, two labels

Technical document 02.1 · Reviewed 2026-11-19 · Citicoline

On this page
  1. Two molecules, one shared group
  2. The choline figure and its denominator
  3. Hygroscopic powders, different failure modes
  4. Dose arithmetic for the same choline figure
  5. What the label has to name
  6. When to choose which

Citicoline and Alpha-GPC are both choline-containing ingredients, but they are not interchangeable. Citicoline is a cytidine diphosphate choline molecule of 488.32 g/mol as the free acid, or 510.31 g/mol as the sodium salt, carrying about 21% choline by mass as the free acid. Alpha-GPC is a glycerol phosphate choline molecule of 257.22 g/mol, carrying about 40%. The difference changes the mass that delivers a given choline figure, the way the powder behaves in storage and the name that has to appear on the label.

In one line

Citicoline and Alpha-GPC both carry choline, but the molecule around it sets the choline figure, the dose and the label.

Two molecules, one shared group

The shared part is choline. In citicoline it is attached through a diphosphate bridge to cytidine; in Alpha-GPC it is attached through a phosphate ester to glycerol. The rest of the molecule is not a detail: it sets the molecular weight, the assay reference, the counter-ion and the label name.

Citicoline forms and Alpha-GPC compared
PropertyCiticoline free acidCiticoline sodiumAlpha-GPC
CAS number987-78-033818-15-428319-77-9
FormulaC14H26N4O11P2C14H25N4NaO11P2C8H20NO6P
Molecular weight488.32510.31257.22
Choline in the moleculeAbout 21.3%About 20.4%About 40.5%
SodiumNoneAbout 4.5%None in the catalog grade
Catalog assay98.0–102.0%Own specification85.0–90.0%
Water≤5.0%Own specification≤3.0%
Label nameCiticoline or CDP-cholineCiticoline sodiumAlpha-GPC or L-alpha-glycerylphosphorylcholine

The sodium salt is a separate grade with its own CAS number and certificate. The Alpha-GPC catalog grade is an 85% powder, and the grade number belongs in the specification because the 50% and 85% grades are different fill weights.

The choline figure and its denominator

The choline fraction is the mass of the choline group divided by the molecular weight: about 104.17 ÷ 488.32 = 21.3% for citicoline free acid, 104.17 ÷ 510.31 = 20.4% for the sodium salt, and 104.17 ÷ 257.22 = 40.5% for Alpha-GPC. These are molecule figures. The powder figure is the assay multiplied by the fraction.

The denominator matters most for Alpha-GPC. Its catalog choline figure is calculated on the Alpha-GPC content, not on the powder. At the 85% grade, the powder carries about 34.4% choline; at the 50% grade, about 20.2%. A choline number quoted without its denominator is not comparable with another ingredient's number, and the same is true of a citicoline assay quoted without its moisture basis.

Choline delivered by 500 mg of each ingredient
IngredientCholine per 500 mgWhat the figure includes
Citicoline free acidAbout 107 mg21.3% of the molecule, before moisture
Citicoline sodiumAbout 102 mg20.4% of the molecule, plus 22.5 mg sodium
Alpha-GPC 85% powderAbout 172 mg85% assay × 40.5% choline
Alpha-GPC 50% powderAbout 101 mg50% assay × 40.5% choline

The 500 mg comparison is arithmetic, not a dose recommendation: it shows why a gram-for-gram swap changes the choline declaration.

Hygroscopic powders, different failure modes

Both materials take up water, and both need a sealed, moisture-barrier pack. Citicoline is hygroscopic and cakes; the free acid gives an acidic solution at pH 2.5–4.5 in the 5% test. Alpha-GPC is deliquescent, so a pack that merely slows moisture pickup for citicoline may be insufficient for Alpha-GPC, and an opened pouch can become sticky before it cakes.

The water limits differ: ≤5.0% for the citicoline catalog grade and ≤3.0% for the Alpha-GPC 85% grade. That difference is a release gate, not a ranking of stability. Both molecules can hydrolyse, and the susceptible bond sits in a different place, so a stability result for one ingredient does not transfer to the other. The pack, the grade and the matrix decide the retest period.

The two solutions also behave differently in a drink mix, so the formulator checks the finished pH, taste and hold time in the actual matrix. Neither ingredient should be described as stable without naming the pack and the condition.

Dose arithmetic for the same choline figure

If a label declares 100 mg of choline, the mass of ingredient depends on the molecule and the grade. Citicoline free acid needs 100 ÷ 0.2133 = 469 mg; the sodium salt needs 100 ÷ 0.2041 = 490 mg. Alpha-GPC as the pure molecule needs 100 ÷ 0.405 = 247 mg, and the 85% powder needs 247 ÷ 0.85 = 291 mg. The same choline declaration therefore corresponds to very different fill weights.

If the label declares the ingredient instead, the arithmetic runs the other way. A 500 mg citicoline free-acid dose supplies about 107 mg choline; a 500 mg Alpha-GPC 85% dose supplies about 172 mg. Matching the Alpha-GPC choline figure with citicoline would need about 806 mg of the free acid. That is a fill-weight decision, not a substitution.

The sodium salt adds a second label figure. A 500 mg sodium-salt dose carries about 22.5 mg sodium, which the nutrition panel may have to declare. The free acid carries none. Neither figure is a recommended intake; both are the arithmetic that keeps the panel and the weigh-up consistent.

What the label has to name

The ingredient name follows the molecule, not the choline figure. Citicoline is labelled as citicoline, CDP-choline or citicoline sodium, depending on the form. Alpha-GPC is labelled as Alpha-GPC or L-alpha-glycerylphosphorylcholine. The buyer's regulatory team confirms which name the destination accepts; this page does not assert that either ingredient is authorised in a named market.

If the panel declares choline, the conversion from the ingredient to choline belongs in the label file, with the form and the grade stated. If the panel declares the ingredient, the form and the quantity are the declaration, and the choline figure is supporting information. A label that says “choline” without the source, or “citicoline” without the form, has left the reader to guess which powder was weighed.

The two ingredients cannot share one label sentence unless the panel names both. A formula that changes from one to the other needs a new specification, a new certificate and a new label review, even when the choline figure is held constant.

When to choose which

Choose by the label ingredient and the market file first. If the label names citicoline, Alpha-GPC is not a drop-in; if the label names Alpha-GPC, citicoline is not either. The choline figure is a useful check on the arithmetic, not a permission to substitute.

Choose citicoline when the specification and the market file are built on citicoline, and choose the free acid or the sodium salt as a separate decision. Choose Alpha-GPC when the label and the file call for it, and name the 50% or 85% grade because the fill weight changes with the grade. Changing direction means a new specification, a new certificate and a fresh label review.

The citicoline product page carries the catalog specification; the Alpha-GPC product page carries the other. The grades page compares the free acid and the sodium salt; the stability page covers the pack; the compliance page covers the documents; the identity page sets out the tests behind the form claim.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation