The regulatory file for citicoline
Citicoline appears on the market as the free acid (CAS 987-78-0) or the sodium salt (CAS 33818-15-4), so the regulatory file has to begin with the form that will be placed on the market. The buyer's regulatory team owns the route for the destination; this page maps the documents and checks the supplier can support, and it is not a substitute for the current legal text.
The form on the certificate and the form in the market file have to be the same molecule, or the label and the route stop matching.
What the file contains
Think of the file in two layers. The material layer holds the specification, the certificate and the analytical data for the lot. The market layer holds the regulatory route, the contaminant ceilings and the label wording. The supplier owns the first; the buyer's regulatory team owns the second, and neither layer can be completed by the other.
The material layer starts with the form. Citicoline free acid, CAS 987-78-0, and citicoline sodium, CAS 33818-15-4, are different ingredients for labelling and for the file. One form, one CAS number and one name should run through the specification, the certificate and the label. A folder that mixes the two is not a file for either.
European Union
EU review usually opens with three files: the purchase specification, the contaminant panel and the draft label. General food law, labelling and contaminant rules sit around any product-specific route. Some markets have an entry for a citicoline form; read the current text for the form it names, the source conditions and any maximum level. The free acid and the sodium salt may fall under different texts.
This page takes no position on whether either form is authorised in the EU. The buyer's team checks the member state route and confirms that the specification describes the material on the market. GB and Northern Ireland are separate checks: GB has its own register and labelling rules, while Northern Ireland follows the EU framework.
United States
US review asks a narrower question first: does this exact dietary ingredient, used as intended, have a lawful route? The supplier can explain the basis and supply the supporting document; the buyer decides whether that basis reaches the finished product and the statement. “Citicoline” and “citicoline sodium” are not interchangeable names on a panel.
The label and the claim sit outside the certificate. The brand's reviewer signs off both, and a supplier letter does not replace that review. Federal and state requirements current on the day of review decide, not a summary on this page.
Contaminants and the finished-product calculation
Contaminant limits are written for the supplement as sold. A raw-material result has to be read against the daily dose and the ingredient's share of the formula. The figures below are a reference point, not a universal ceiling.
| Parameter | Typical supplement reference | What the file should show |
|---|---|---|
| Lead (Pb) | 3.0 mg/kg in the supplement | Lot result, method, limit and the finished-product calculation |
| Cadmium (Cd) | 1.0 mg/kg in the supplement | Lot result and any category exception that applies |
| Mercury (Hg) | 0.10 mg/kg in the supplement | Lot result and method |
| Arsenic (As) | Customer or market limit | The agreed limit and the method, stated on the certificate |
Water ≤5.0% is a quality limit, not a contaminant ceiling. The sodium salt adds sodium to the finished product, and that figure belongs in the label review even though it is not a contaminant. The conversion uses the daily dose and the formula share, not the drum result alone.
Label and claims
Label review has two separate jobs. The first is to describe the material: name, form and quantity. If the panel declares choline, the conversion belongs there too: citicoline free acid is about 21.3% choline by mass and the sodium salt about 20.4%, so the ingredient mass and the choline mass are different numbers. If the panel declares the ingredient, the form and the quantity are the declaration.
The second job is the claim. The brand's reviewer signs off the wording for the product, form and market; a certificate cannot approve a claim, and a claim cannot amend a specification. This page is technical, not promotional, and makes no disease-related statement.
The document pack
The supplier can usually provide:
- A lot COA with appearance, identity, assay, water, pH, heavy metals and microbiology.
- A technical data sheet and a purchase specification that name the form and the CAS number.
- A safety data sheet in the 16-section format.
- Allergen, GMO, origin and residual-solvent statements.
- The specification version, the pack and the retest period.
- An independent COA where the buyer asks for one.
Every document should carry a version or a lot reference. A data sheet without a version and a certificate without a lot number do not make a pair.
Checklist before the first order
Before the purchase order:
- The specification, COA and label use one form name, one CAS number and one ingredient name.
- The assay basis and water result are printed; the sodium figure appears where the salt is claimed.
- Contaminant results are worked back through the daily dose.
- The label and claim have been reviewed for the destination, including any choline declaration.
- Any change to source, process or pack runs through change control, and the route is confirmed.
- Quotation, specification and certificate are on the same version.
The citicoline product page carries the catalog specification. For the lot document, see the COA page; for the analytical checks, the identity page; for the supplier release sequence, the quality page; for the EU framework, the EU regulatory note.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation