01 COA & batch testing

What the COA for shark chondroitin sulfate actually contains

Technical document 01 · Reviewed 2026-11-20 · Chondroitin Sulfate Shark

On this page
  1. What each certificate row should show
  2. The dried basis, the CPC standard and the composition figures
  3. The limit and the measured result
  4. Batch-to-batch variation
  5. Bringing in an outside laboratory
  6. Comparing two suppliers

On a shark chondroitin sulfate lot, the certificate covers appearance, identification by CPC and HPLC, assay by CPC titration on the dried basis, sulfate and protein, loss on drying, heavy metals, microbiology, particle size and the species behind the cartilage. Each line should name its method and release limit, with the measured result in a separate column. The ranges are the catalog specification; the lot COA confirms the drum.

In one line

A shark chondroitin certificate is a source document as much as an assay document: the CPC standard, the dried basis, the sulfate and protein figures and the species name have to agree before the percentage means anything.

What each certificate row should show

A certificate can be audited only when each row states the measurement, the method and the limit. “Conforms” on its own asks for trust instead of evidence. The shark grade adds a line a terrestrial grade does not carry: the species.

Identity, assay and composition · shark chondroitin sulfate
ParameterMethodRelease limit
AppearanceVisualWhite to off-white powder
IdentificationCPC reaction against a referenceConforms
IdentificationHPLC against a referencePrincipal peak matches
Assay, dried basisCPC titration90.0–105.0%
SulfateMethod named on the certificate15.0–20.0%
ProteinColorimetric or nitrogen determination≤5.0%
Loss on dryingGravimetric≤10.0%
Particle sizeSieve analysis≥95% through 80 mesh

The two identification lines ask different questions: the CPC reaction shows a sulfated glycosaminoglycan, and the HPLC comparison shows that the peak pattern matches the chondroitin reference. “Shark” is a category, not a species, so the statement should name the animal.

The dried basis, the CPC standard and the composition figures

Chondroitin sulfate is a mixture of sulfated chains rather than a single molecule, and the assay is reported on the dried basis. The powder holds water, and an as-is figure falls as moisture rises. A lot at 88.0% as-is with 8.0% loss on drying works out at 95.7% dried.

CPC titration uses cetylpyridinium chloride, which binds the anionic sulfate and carboxylate groups. The CPC consumed is converted to chondroitin sulfate against a standard, so the number is a charge equivalent, not a mass purity; the standard and titration mode belong beside it. The 90.0–105.0% window is wide because a charge assay responds to sulfation pattern and chain length, and a lot can read above 100% without containing more than 100% chondroitin by mass.

Sulfate is specified at 15.0–20.0%, the range expected for a sulfated chondroitin chain, and protein is capped at 5.0% as residual cartilage protein. The protein cap is also not an allergen limit: a low protein result does not settle the fish allergen question, which is a separate assessment.

The HPLC line belongs with a chromatogram. A peak at the reference retention time is a start; the spectrum or full peak pattern is the second dimension. If the certificate says only “HPLC conforms”, ask for the column, mobile phase, detection wavelength and standard. A disaccharide-composition run after enzymatic digestion is the stronger test, because it reports the sulfation pattern rather than one retention time.

The limit and the measured result

The limit is the line the lot had to meet; the batch result is the number the laboratory obtained. The two sit in separate columns with the method named. When the result column repeats the specification range, it records the gate rather than the measurement.

What the result column should carry · shark chondroitin sulfate
ParameterRelease limitResult column
Assay90.0–105.0% dried basisThe measured value, basis and standard
Sulfate15.0–20.0%The measured figure and the method
Protein≤5.0%The measured figure and the method
Loss on drying≤10.0%The measured value
Heavy metalsPer elementA figure per element in mg/kg
MicrobiologyCounts and absenceThe count and the absence line

Microbiology needs a count and an absence statement, and metals need a figure per element; one combined metals total conceals which element was high. An assay of 90.3% passes, but five lots at 90.2% tell a different story from five lots at 99%. Read the margin, not only the verdict.

Batch-to-batch variation

Species and tissue come first. Cartilage from the fin and from the back need not give the same chain population, and a multi-species supply will show a wider spread in molecular weight, colour and odour. Extraction, purification and drying then move protein, moisture and colour; milling and sieving move particle size without touching the chemistry.

Colour and odour are the least quantitative lines and often the most revealing. White to off-white is a wide window, and a lot that arrives grey or yellow, or smells strongly of fish, usually points to residual protein, a warm drying step or a long hold. None is an identity failure alone, but each is a reason to open the batch record before accepting the drum.

Watch the direction of travel across lots, not just one value near a limit: assay easing down, sulfate easing down, protein rising, or moisture stuck at the top. The certificate, the pouch, the drum and the retained sample should all show one lot code, and the species statement should be specific to that lot.

Bringing in an outside laboratory

An outside test is worth ordering for a new supplier, an initial shipment, a disputed result or a certificate with no traceable lot. The useful panel is CPC assay against a declared standard, HPLC identity with the chromatogram, sulfate and protein, loss on drying, ICP-MS for the metal panel and the micro absence tests. Add a species test when the paper file does not convince you; DNA barcoding or species-specific PCR answers a question the chemical panel cannot.

The report should state the detection limit and the reference standard behind each number. A “not detected” without a limit, or a species call without a reference, tells you about the method rather than the powder. The methods index explains what the contaminant and microbiology panels do and do not prove.

Comparing two suppliers

A like-for-like comparison needs six lines to agree. Assay alone is not enough: a passing percentage can hide a different species, standard, moisture or mesh.

Six lines that decide whether two shark chondroitin certificates describe the same powder
LineWhat it changesWhat to request
Species and tissueChain length and sulfation track the speciesSpecies, tissue, origin, lot statement
CPC methodThe reference sets the responseMethod text, standard, mode of titration
Moisture basisAs-is and dried figures are different numbersThe basis printed on the COA
HPLC identityShows whether the pattern is chondroitinChromatogram, column, standard
Sulfate and proteinDescribe the chain and the cleanupResults and methods, not limits alone
Species and fisheries fileThe assay cannot show species or listing statusSpecies statement, allergen assessment, permit where listed

Put the species line first, because no chemical test on the certificate proves it. Catalog data are on the shark hub; the identity page sets out the species evidence; the compliance page covers the fish allergen and fisheries paperwork; the bovine grade page is the comparison; the quality page explains the release file.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation