How we prove a chondroitin lot came from shark
A shark chondroitin lot is identified in two directions at once. The chemical side asks whether the powder is chondroitin sulfate: a CPC assay against a declared standard, an HPLC identity against a reference, and the sulfate, protein and moisture figures that describe the chain population. The source side asks whether the cartilage came from shark. Neither question is answered by the assay percentage, and a certificate that reports only that percentage has answered neither fully.
Identity has two questions here: whether the powder is chondroitin sulfate, and whether the cartilage came from shark; the assay answers neither on its own.
The identity layers
Each layer answers a different question and needs its own evidence. An answer that stops at the source document describes a file, not a bag of powder.
| Layer | Question | Evidence | What it proves |
|---|---|---|---|
| Source document | Is the species named and traceable? | Species, tissue, origin and lot statement | Documentation only |
| Charge assay | How much sulfated material is present? | CPC titration on the dried basis | A charge equivalent, not a purity |
| Chromatography | Is the peak pattern chondroitin? | HPLC against a reference standard | The molecular family |
| Composition | Is the powder diluted or protein-rich? | Sulfate, protein and loss on drying | Consistency of the numbers |
| Species test | Did the cartilage come from shark? | DNA barcoding or species-specific PCR | The animal source |
The species test is the layer most often missing. A species statement is a declaration by the supplier; a DNA result on the retained sample is evidence about the lot. The two are complementary, and a buyer who needs the label to say shark should ask for both.
Reading the charge and composition figures together
CPC titration is a charge measurement. Cetylpyridinium chloride binds the anionic sulfate and carboxylate groups, and the amount consumed is converted to chondroitin sulfate against a standard. The response moves with the number of anionic sites on each chain and with chain length, which is why the standard and the titration mode belong on the certificate. Two laboratories can report different percentages for the same powder if the references differ.
The sulfate figure is the other half of the charge picture. At 15.0–20.0%, it sits where a sulfated chondroitin chain is expected, and it moves with the sulfation pattern of the source. A lot that passes the CPC assay while sulfate sits at the bottom of the window, or below it, deserves a second look: the assay counts charge, and the sulfate figure says how much of that charge is sulfate.
Protein is the third figure. It is capped at 5.0%, and a result near the cap with a high assay points to a powder that was concentrated on chondroitin but not fully cleaned up. A low protein result with a normal sulfate figure is the pattern of a clean lot. Taken as a set, assay, sulfate and protein are harder to fake than any one of them, because a dilution or a substitution moves at least one of the others.
What XRD can and cannot show
The polymer is hygroscopic and does not form a sharp crystalline pattern, so an X-ray diffraction scan shows a broad halo instead of reference peaks. XRD cannot tell chondroitin apart from dermatan or heparan sulfate, cannot read the sulfation pattern that the CPC assay responds to, and cannot reveal a low-molecular-weight fraction. Its only useful job here is spotting a crystalline filler such as sodium chloride, whose sharp reflections stand out from the halo; at a low level the filler can still escape detection.
Ask for the pattern and the reference before accepting a “match” statement. In a disputed lot, the useful combination is the CPC assay, the HPLC chromatogram, the sulfate and protein results and a species test, not an XRD line on its own.
Routes of substitution
| Route | What it does to the certificate | Signal and test |
|---|---|---|
| Other glycosaminoglycans | Dermatan or heparan material titrates and stains | HPLC pattern; sulfate figure; electrophoresis |
| Low-molecular-weight fraction | The response changes with chain length | Stated molecular weight; a matched standard |
| Salt or sodium chloride | Adds weight, not chondroitin | Dried-basis assay; ash; conductivity |
| Maltodextrin or sugar | Dilutes the powder; moisture rises | Assay, protein, HPLC; sugar profile |
| Protein filler | Adds bulk; the protein figure rises | Protein result; HPLC pattern |
| Undeclared species | Passing assay, wrong animal and file | Species statement; DNA barcoding or PCR |
| Unpurified shark cartilage | Lower chondroitin content per gram | Assay, protein, ash; solubility |
None of these is caught by a single measurement. Screen with the CPC assay against a declared standard, the HPLC pattern, sulfate, protein and moisture, then add a species check against the label. Colour is the weakest signal: white to off-white covers a wide range, and a powder can be the right colour and still be the wrong material.
The identity block in the specification
- “Shark-cartilage chondroitin sulfate, CAS 9007-28-7; species, tissue and origin named on the lot file.”
- “Assay target 90.0–105.0% by CPC, on the dried basis; standard and mode named.”
- “Composition targets: sulfate 15.0–20.0%, protein ≤5.0%, moisture ≤10.0%.”
- “Identification by CPC and HPLC against a reference; chromatogram and spectrum available.”
- “Species confirmed by DNA barcoding or species-specific PCR where the label names shark.”
- “No other glycosaminoglycan above the agreed limit; ash and conductivity as agreed.”
Questions to put to the supplier
- Which shark species and which tissue does this lot come from, and is the statement issued for the lot?
- What standard and titration mode did the CPC assay use, and what molecular-weight range does that standard cover?
- Please send the HPLC chromatogram with the sulfate and protein results, not just the assay figure.
- Has the lot been tested for species, and which method and reference database were used?
- If we dispute the lot, will you join a re-test on the retained sample?
Those five answers, taken together, are the identity file; a single assay figure is not. The shark hub holds the catalog data; the COA page maps each figure; the grades page compares the forms; the compliance page covers the fish allergen file; the methods index explains the assay and chromatographic methods; the bovine page is the other source; the quality page covers release.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation