What the COA for porcine chondroitin sulfate contains
The certificate for a porcine chondroitin sulfate lot reports appearance, identification by CPC reaction and HPLC, assay by CPC titration on the dried basis, sulfate, protein, loss on drying, particle size, heavy metals and microbiology. The ranges in the tables below form the catalog specification; the batch COA is the document that confirms a particular drum. The species and tissue statement belongs to the same lot file.
The porcine source is not an assay line: the certificate has to name the tissue, report the CPC assay on the dried basis, and show the HPLC identity beside the sulfate and protein figures.
The certificate as a test report
A certificate is auditable when each row can be read three ways: what was measured, which method produced the number, and which limit released the lot. A row that says only “conforms” asks the reader to accept a conclusion without the evidence.
| Parameter | Method | Release limit |
|---|---|---|
| Appearance | Visual | White to off-white powder |
| Identification | CPC reaction and HPLC against a reference | Conforms |
| Assay, dried basis | CPC titration against a declared standard | 90.0–105.0% |
| Sulfate | Hydrolysis followed by sulfate determination | 15.0–20.0% |
| Protein | Colorimetric or nitrogen determination | ≤5.0% |
| Loss on drying | Gravimetric | ≤10.0% |
| Test | Method | Limit |
|---|---|---|
| Particle size | Sieve analysis | ≥95% through 80 mesh |
| Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg |
| Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent |
The CPC reaction binds the anionic groups of the glycosaminoglycan and shows that the material behaves as a sulfated polysaccharide; the HPLC result compares the chain profile with a reference. The assay then reports how much of that material the titration finds against the declared standard.
The dried basis, the sulfate line and the protein
The assay is reported on the dried basis. The laboratory measures the powder as received and divides by the dry matter, so a lot at 90.5% as-is with 8.0% loss on drying calculates to 98.4% on the dried basis. A certificate that omits the basis cannot be compared with another supplier's sheet.
The 90.0–105.0% window follows from the method. CPC titration converts a charge response into a chondroitin equivalent against a standard, so a lot whose sulfation pattern or chain length differs from the standard can report above 100% without containing 105% chondroitin by mass. The certificate should name the standard and the titration mode.
Sulfate and protein are composition lines, not alternative assays. The sulfate result, 15.0–20.0% for this grade, moves with the sulfation pattern of the chains. Protein, ≤5.0%, is residual cartilage protein that survived purification. Neither is chondroitin, and neither can be inferred from the assay percentage.
Release limit versus batch result
The limit is the gate the lot had to pass; the result is what the laboratory found. Both belong on the sheet, in separate columns, with the method named beside them.
| Parameter | Release limit | Result column |
|---|---|---|
| Assay | 90.0–105.0% dried basis | A measured percentage, with the basis and the standard |
| Sulfate | 15.0–20.0% | A measured percentage and the method |
| Protein | ≤5.0% | A measured percentage |
| Loss on drying | ≤10.0% | A measured percentage |
| Identification | CPC and HPLC conform | The chromatogram and the reference used |
| Heavy metals | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | A figure per element in mg/kg |
| Microbiology | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | The count and the absence statement for the lot |
“Conforms” is a conclusion, and the reader should be able to reach it from the numbers. For heavy metals that means a figure per element, not a sum; for microbiology, a count plus an absence statement. The margin matters too: a lot at 90.3% is inside the window, but three lots at 90.1–90.4% read differently from three lots at 98–101%.
What moves between batches
The starting tissue is the first variable. Cartilage from the trachea and from the nasal septum does not give an identical chain population, and the age and condition of the animals add a second layer. A supplier that buys from more than one abattoir will see the sulfate figure and the protein result move before the assay does.
Extraction decides residual protein and low-molecular-weight material; drying decides the loss on drying and can move the colour; milling decides the 80 mesh figure. A change of mill can move the particle-size result without any change in the chemistry. Colour and odour are the least quantitative lines and often the most revealing: a lot that is noticeably darker or carries an odour can point to incomplete washing while the assay still passes.
When to order an outside test
An outside test earns its place with a new source, a first shipment into a regulated market, a certificate that does not trace to a lot, or a contested result. The panel should not simply repeat the certificate: CPC assay against a declared standard, HPLC identity with the chromatogram, sulfate, protein, moisture, ICP-MS metals and the micro counts.
Add a species-specific test on the raw material when the species claim is material to the label or to a religious-use review. On a purified polysaccharide the DNA may be too fragmented for a reliable result, so the raw cartilage or the retained in-process sample is the better matrix. Ask for the detection limit with each screen; a “not detected” line without a limit describes the method, not the sample.
What to compare between suppliers
| Line | Why it changes the reading | What to ask for |
|---|---|---|
| Species and tissue | The CAS number is generic and does not name the animal | Porcine trachea or nasal septum, stated in words |
| Assay standard and mode | The CPC response depends on the reference | Method text, standard, titration mode |
| HPLC identity | A percentage does not show the chain profile | Chromatogram, column, mobile phase, reference |
| Sulfate and protein | Composition lines, not assay alternatives | Results and methods, not only limits |
| Moisture and mesh | Both move with drying and milling | Loss-on-drying result and the sieve cut |
| Source documents | The assay cannot show species or religious status | Species declaration, religious-use statement, origin |
The catalog specification sits on the porcine chondroitin sulfate product page. The bovine chondroitin sulfate page carries the other source's specification. The identity page covers the tests that separate chondroitin from other glycosaminoglycans; the market and religious-use file is on the compliance page; the panels are described in the methods index; the release workflow is on the quality page.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation