Porcine chondroitin sulfate: choosing the source and the grade
The catalog grade is porcine chondroitin sulfate: assay 90.0–105.0% by CPC titration on the dried basis, sulfate 15.0–20.0%, protein ≤5.0%, loss on drying ≤10.0% and ≥95% through 80 mesh. Bovine and shark material can meet the same assay window, so the certificate does not choose the source for the buyer. The species, the tissue and the documents that travel with the lot are the grade decision, and they come before the specification lines.
The species, not the assay, separates this grade from bovine and shark material: porcine carries its own declaration, its own label name and a religious-use position before any specification line is agreed.
Why the source is the grade
Chondroitin sulfate is a family of sulfated glycosaminoglycan chains rather than one molecule with a fixed formula. The chains are extracted from cartilage, and the species and tissue shape the mix of chain lengths and sulfation patterns that reach the powder. Two suppliers can report 96% against the same standard while their powders differ in chain length, residual protein and colour.
The species is not visible in the assay. CAS 9007-28-7 covers the family, so a passing CPC result says nothing about whether the cartilage came from a pig, a cow or a shark. The species and tissue have to be written into the specification, the COA review and the source declaration before the lot is approved.
The label is the other reason. A brand that names a porcine source cannot move to bovine material without changing the artwork and the customer approval, and in some markets without reopening the religious-use position. The source is a commercial and documentary decision as much as a chemical one.
Porcine, bovine and shark side by side
| Attribute | Porcine (this grade) | Bovine | Shark |
|---|---|---|---|
| Starting tissue | Trachea or nasal septum | Tracheal or nasal cartilage | Cartilage from fin or back |
| Assay window | 90.0–105.0% dried basis | 90.0–105.0% dried basis | 90.0–105.0% dried basis |
| Protein limit | ≤5.0% | ≤6.0% | ≤5.0% |
| Animal-source file | Species and tissue declaration; pigs are not a TSE-relevant species | BSE/TSE declaration with origin and SRM-free statement | Species statement; CITES check where the species is listed |
| Religious use | Not halal and not kosher | Halal or kosher only with a certificate that covers the chain | Fish-derived; the certifier confirms the position |
| Label name | Porcine chondroitin sulfate | Bovine chondroitin sulfate sodium | Shark chondroitin sulfate |
The table reports the limits and names carried by the three catalog specifications, not a universal rule. The molecular-weight profile is the line that is easiest to over-read: reported ranges for bovine tracheal material sit around 20–25 kDa and for shark material around 50–80 kDa, while porcine material overlaps the bovine range. A molecular-weight claim should come with the method and the lot value.
The salt name needs a check too. The catalog sheet for this grade does not print a sodium line, so the exact label name follows the salt form and the brand's wording and should be agreed in the specification, where the certificate can support it.
What the powder handles like
This grade is a white to off-white, free-flowing powder, ≥95% through 80 mesh. It dissolves in water to a viscous solution, and the viscosity is a handling property rather than a release line. Bulk density and flow vary with milling and moisture, so one source can behave quite differently from another depending on the drying and sieving route.
The powder is hygroscopic. A drum opened in a humid room picks up moisture at the surface first, and the loss on drying rises before the assay moves. Colour and odour are useful purification signals: a lot that is noticeably darker or carries a smell usually points to residual protein or a hot drying step, not to a different grade.
Granulation is available on request. It changes the particle profile and the flow, so it is a separate specification line rather than a packing choice, and it should be agreed before the capsule or tablet trial.
Capsules, tablets and powder blends
Chondroitin is dosed in grams, so the dosage form sets the fill weight and the number of units per serving. A capsule line needs a free-flowing 80 mesh powder of steady bulk density; a tablet line needs a powder that compacts without picking or sticking, which may call for granulation rather than a finer cut. A powder blend needs a particle size and density close enough to the other components that the blend does not segregate in the hopper.
The hygroscopic behaviour belongs in the formula review. A capsule shell and the excipients can move moisture into the fill, and a blend that sits in a hopper picks up moisture from the room. The specification should state the loss-on-drying limit and the storage condition, and the trial should check the powder after storage rather than only at release.
A stick pack or a drink mix adds a viscosity constraint: the powder disperses but the mix thickens, so the serving size and the mixing instructions have to be tested together. This grade's catalog applications are capsules, tablets and powder blends; a beverage is a separate development question.
Writing the source into the specification
- “Porcine chondroitin sulfate, CAS 9007-28-7, from porcine cartilage (trachea or nasal septum), country of origin stated.”
- “Assay 90.0–105.0%, dried basis, by CPC titration against a declared standard; state the standard and the titration mode.”
- “Identification by CPC reaction and HPLC against a reference; keep the chromatogram with the lot file.”
- “Sulfate 15.0–20.0%; protein ≤5.0%; loss on drying ≤10.0%.”
- “≥95% through 80 mesh; heavy metals and microbiology to the listed limits.”
- “Species and tissue declaration, religious-use statement and allergen statement on file for every lot.”
When porcine is the wrong source
Porcine material is not halal and not kosher. A product that has to carry either mark cannot use it, and no certificate converts the source. That is the first exclusion, and it is decided by the market and the customer rather than by the assay.
Other exclusions are commercial and documentary. Do not choose porcine when the label or the notified formula names another species, when the customer's supplier approval is built around a bovine or shark file, or when the brand's positioning is animal-free. Even with the same CAS number and assay window, changing source creates a new ingredient file.
The product page carries the catalog specification. The porcine versus bovine comparison takes the religious-use and label questions further; the bovine hub carries the other source; the compliance page sets out the file; the quality page describes the release workflow.
In this document
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation