05 Compliance

The regulatory file for sodium caseinate

Technical document 05 · Reviewed 2026-11-20 · Sodium Caseinate

On this page
  1. The four checks in the file
  2. European Union
  3. United States
  4. Contaminants and the finished-product calculation
  5. The label: the salt name, milk and sodium
  6. Claims and wording
  7. Documents for the file
  8. Checklist before the first order

Sodium caseinate is a milk protein with a long history of food use, so the permission to sell it is rarely the hard part. The file has to carry the milk allergen declaration, the sodium figure on the nutrition panel, the contaminant results for the product as sold, and the wording of any protein claim. The destination route and the finished-product status are confirmed by the buyer's regulatory team.

In one line

The permission is rarely the question for sodium caseinate; the milk allergen, the sodium declaration, the contaminant limits and the claim wording are what the file has to carry.

The four checks in the file

First, the material must be a permitted food ingredient in the destination. Second, any caseinate is a milk protein and triggers an allergen declaration. Third, the contaminant result is converted from powder to finished product. Fourth, the label and claim wording must match the form, dose and market.

Ownership is split as well. Ingredient status sits with the supplier and importer, the allergen with the recipe and label, the limit with the food category, and the claim with the brand. Three answers out of four leave a hole, usually the allergen because the powder is “just protein”. The specification revision, COA, allergen statement and label artwork should also be dated and cross-referenced.

European Union

Caseinates have a long history of food use in the EU and are not, as far as this review can establish, a novel food; the current novel food catalogue should still be checked before a new source is launched. Sodium caseinate is a food ingredient rather than a food additive, and it carries no E number.

Regulation (EU) No 1169/2011 governs allergen labelling. Milk and products thereof, including lactose, are on Annex II, so “milk” has to appear in the ingredient list and be emphasised. The nutrition declaration is mandatory and includes salt, calculated as sodium × 2.5; a sodium figure of 1.0–1.5% becomes 2.5–3.75% salt on a powder basis.

Directive 2002/46/EC harmonises the vitamin and mineral lists for food supplements but leaves other ingredients, proteins included, to national rules. Contaminant limits sit in Regulation (EU) 2023/915, and claims in Regulation (EC) No 1924/2006. Framework references are collected in the EU regulatory notes.

United States

Sodium caseinate is generally recognised as safe as a multiple-purpose food substance under 21 CFR 182.1748, used in accordance with good manufacturing practice. A dietary supplement facility has to meet 21 CFR 111, and the label has to meet the supplement labelling rules. The supplier states the basis for the intended use; the buyer files it.

Milk is a major food allergen under FALCPA, so the product must declare it in the ingredient list, in a “Contains” statement, or both. The declaration follows the protein, not the lactose figure, so a low-lactose caseinate is still a milk-containing ingredient.

The sodium line appears in the Nutrition Facts or Supplement Facts panel, in mg and as a percentage of the 2,300 mg Daily Value. A protein claim is a nutrient content claim: 21 CFR 101.54 sets “good source” at 10% or more of the Daily Value per serving and “excellent source” at 20% or more, against a 50 g protein Daily Value. Lead may also bring California Proposition 65 into play on a daily-intake basis.

Contaminants and the finished-product calculation

Contaminants are a finished-product calculation, not only a drum result; the destination text and daily dose decide the final limit.

Contaminant limits to confirm for a sodium caseinate supplement
ElementEU supplement referenceUS positionUK position
Lead (Pb)3.0 mg/kgNo federal supplement limit; state rules applyRetained GB limit; check the current text
Cadmium (Cd)1.0 mg/kgNo federal supplement limitRetained GB limit; check the current text
Mercury (Hg)0.10 mg/kgNo federal supplement limitRetained GB limit; check the current text
Arsenic (As)Not harmonised; member-state rules may applyNo federal supplement limitCheck the current GB text

Those EU values are set by Regulation (EU) 2023/915 for supplements as sold, as of this review. A caseinate sold as an ingredient is assessed against the limit for the food category it enters. Arsenic is not harmonised at EU level, so the specification states the limit it is tested against; the catalogue sets it as a customer limit.

The label: the salt name, milk and sodium

The ingredient name has to be the salt in the drum. “Sodium caseinate” is this product; “caseinate” or “casein” does not identify the cation. Milk must be emphasised as the allergen in the EU and the UK and declared as a major allergen in the US.

The sodium follows the powder into the serving. At 1.0–1.5% sodium, a 20 g serving carries 200–300 mg of sodium, which is 500–750 mg of salt in the EU calculation and 9–13% of the US Daily Value; a 30 g serving carries 300–450 mg. Calculate from the measured lot, not from the catalogue midpoint.

“Dairy-free” and “lactose-free” are separate claims with their own basis; neither is available automatically for a milk protein. The finished product's wording belongs to the brand and the market.

Claims and wording

A disease claim is not available in any market this site supplies. Protein claims are a separate regime: the EU requires 12% of energy from protein for “source of protein” and 20% for “high protein”; the US uses 10% and 20% of the Daily Value; the UK applies the retained EU conditions. Confirm whether the destination assesses a supplement per daily portion or per 100 g before the label is set.

Sodium claims are a separate review. A “low sodium” claim has its own threshold in each market, and a protein powder at 1.0–1.5% sodium is unlikely to meet it at a normal serving, though the finished product decides.

Documents for the file

  • Specification with the revision, the salt form, the protein factor and the dry basis.
  • Batch COA with results and methods, including sodium by ICP-OES and the allergen statement.
  • SDS, TDS and the animal-origin and BSE/TSE statement.
  • Site certificates — GMP, HACCP or ISO — for the plant that made the lot.
  • Origin declaration, non-GMO statement and halal or kosher certificates where the market asks.
  • Label artwork and claim substantiation for the finished product.

The COA structure is set out on the COA page; the mineral tests are described in the ICP-OES method note; the catalogue specification is on the sodium caseinate product page; and the quality page describes how the release file is kept.

Checklist before the first order

  1. Is the salt named on the specification and on the ingredient list?
  2. Is milk declared, with no dairy-free wording on the pack?
  3. Is sodium converted to salt for the EU and to mg and %DV for the US?
  4. Are the contaminant results inside the destination limit for the product as sold?
  5. Does the protein claim use the protein as consumed, with the factor and basis declared?
  6. Do the COA, specification and label artwork carry one revision?

The US and UK market notes sit beside the EU summary; the other salt is on the calcium caseinate page.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation