02.1 Hemp vs pea

Hemp protein vs pea protein: amino acids, fibre and the label

Technical document 02.1 · Reviewed 2026-11-20 · Hemp Protein

On this page
  1. Protein density and what comes with it
  2. Amino acids: two different limiting points
  3. Fibre and the carbohydrate panel
  4. Allergens and the source statement
  5. Label wording for either source
  6. Which one fits

Hemp protein and pea protein are both plant proteins, but the catalogue materials sit at different densities: hemp is a 50% concentrate with up to 10% fat and 10% fibre, while pea is an 80% isolate with most fibre and fat removed. Hemp is high in arginine and low in lysine; pea is the reverse. The label has to state the source and the fibre, the specification has to state the protein factor, and the two are not interchangeable gram for gram.

In one line

Hemp and pea protein are both plant proteins, but they sit at different protein densities, carry different fibre loads and use different nitrogen factors, and those three facts decide the label.

Protein density and what comes with it

The catalogue materials are not the same grade. Hemp is a 50% concentrate at ≥50.0% protein on a dry basis, N × 5.7, fat ≤10.0% and fibre ≤10.0%. Pea is an 80% isolate at ≥80.0%, N × 6.25, fat ≤2.0% and ash ≤5.0%, with most of the fibre and starch removed. The comparison is a concentrate against an isolate, which is how the two appear on a specification.

Hemp protein and pea protein isolate · catalogue limits side by side
PointHemp proteinPea protein isolate
Protein, dry basis≥50.0% (N × 5.7)≥80.0% (N × 6.25)
Protein, as-is at the moisture limit46.5% at 7.0%73.6% at 8.0%
Powder for 20 g protein43.0 g27.2 g
Fat≤10.0%≤2.0%
Fibre≤10.0%Largely removed; no fibre line in the catalogue
Ash≤6.0%≤5.0%
Major allergenNo; hemp is not on the listsNo; pea is a legume but not on the lists
Hemp-specific limitTHC 3.0 mg/kg in the EU for seed-derived productsNone

The protein gap is 15.8 g of powder per 20 g of protein. In a 30 g stick, the hemp concentrate cannot deliver 20 g of protein at all; the pea isolate can. That is a serving-size fact, not a quality judgement, and it decides which grade fits the format.

Amino acids: two different limiting points

Both contain all the indispensable amino acids and both have a limiting one. Hemp is high in arginine and low in lysine; a published hemp protein isolate reports about 15 g arginine and 2.5 g lysine per 100 g protein, with tryptophan also low. Pea is high in lysine and low in methionine and cysteine. The published PDCAAS for hemp seed products is around 0.5–0.6, commonly limited by lysine; pea scores higher because its lysine is strong, though its sulfur amino acids remain limiting.

Amino acid markers · hemp against pea
Amino acid markerHempPeaConsequence
ArginineHigh, about 15 g/100 g proteinLowerHemp carries more of the arginine
LysineLow, about 2.5 g/100 g proteinHighHemp is the limiting side for lysine
Methionine + cysteineModerate, about 5.5 g/100 g proteinLowPea is the limiting side for sulfur amino acids
TryptophanLow in some isolatesModerateCheck the profile, not the headline
PDCAASAbout 0.5–0.6HigherA blend can complement the two

The profiles are complementary, which is why blends exist. A blend is a new specification: the amino acid profile, the protein factor and the ingredient statement all change. A “complete protein” claim needs a substantiated basis; the word has no defined legal meaning, and hemp alone is not the strongest basis for it.

Fibre and the carbohydrate panel

Hemp carries up to 10.0% total dietary fibre; the pea isolate has removed most of it, and its carbohydrate by difference is largely residual starch, sugar and ash. In the EU, fibre is declared separately from carbohydrate, so hemp fibre is a line of its own; in the US, fibre sits inside total carbohydrate, with dietary fibre as a sub-line. The same powder produces a different carbohydrate panel in the two markets.

Fibre is also functional: it binds water, adds body to a bar, slows dispersion and can make a drink grainy. At 43 g of hemp powder per 20 g of protein, the serving can carry up to 4.3 g of fibre; at 27.2 g of pea isolate, it is a small fraction of that. If the product wants a fibre claim, hemp contributes; if it wants a clean carbohydrate line, pea is easier.

Allergens and the source statement

Neither hemp nor pea is on the EU, US or UK major-allergen lists. That means no mandatory emphasis and no “Contains” statement, but the source cannot be left out: the ingredient list has to name the protein, and “plant protein” alone is incomplete.

Pea is a legume, and legume allergy is real; cross-reactivity with peanut and lupin has been reported, so a pea product needs a pea statement and a cross-contact record. Hemp allergy is less common but possible, and hemp pollen allergy is a different question. Hemp's regulatory marker is THC, not an allergen; pea's is the legume statement. A shared line with soy, wheat, milk, egg or peanut needs cleaning validation and, where risk remains, an advisory statement.

Label wording for either source

In the EU, the ingredient list names the source and the form: “hemp seed protein” or “pea protein isolate”. The nutrition declaration shows protein, fat, carbohydrate and salt, with fibre where a fibre claim is made; the protein figure is as-is, consistent with the factor and the moisture. The claim thresholds are 12% of energy for “source of protein” and 20% for “high protein”; fibre is 3 g/100 g for “source of fibre” and 6 g/100 g for “high fibre”.

In the US, the Supplement Facts panel declares protein and dietary fibre in grams with the Daily Value percentages; “good source” starts at 10% of the Daily Value and “excellent source” at 20%, on a protein Daily Value of 50 g and a fibre Daily Value of 28 g. The DSHEA disclaimer and supporting evidence are needed for structure/function wording. In both markets the protein factor belongs in the specification: a 50% hemp figure and an 80% pea figure are not comparable without it.

Which one fits

Choose hemp protein when the formula can carry the fat and fibre, when the earthy flavour suits the matrix, when 43 g of powder per 20 g of protein fits the serving, and when the THC file is in place for the destination. Choose pea isolate when the serving needs a high protein density, when the fibre and fat have to stay low, when a neutral flavour matters, or when the hemp THC file is not available for the market.

A blend can use the amino acid complement and the fibre together, but it is a new specification with two sources and one nutrition panel. Neither choice is a health statement; it is a statement about protein density, fibre, flavour and the documents the market requires. The hemp product page and the pea product page carry the catalogue limits; the hemp compliance page covers the THC file; the pea compliance page covers the legume statement; the methods index covers the tests; the quality page describes the release workflow.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation