02 Grade comparison

Egg white protein grades: protein floor and powder form

Technical document 02 · Reviewed 2026-11-20 · Egg White Protein

On this page
  1. Why one name covers several powders
  2. The two catalogue forms side by side
  3. What changes in the drum and on the line
  4. Dose arithmetic and the label
  5. What to write into the specification
  6. When this grade is the wrong choice

Egg white protein is sold as a spray-dried powder against a protein floor, and the grade is that floor plus the physical form. The catalogue specification is ≥80.0% protein on a dry basis, ≤8.0% moisture and ≥95% through 80 mesh, with an instantized version on request. The switch that matters is not the name on the bag but the protein per gram and the way the powder disperses.

In one line

The grade is the protein floor and the powder form behind it; instantizing changes how the powder wets and flows, not the protein the label declares.

Why one name covers several powders

Egg white protein, dried egg white and egg albumin are three names for the same family. The material is made by separating egg white from the yolk, pasteurising it, removing part of the water and spray-drying the rest. What leaves the dryer is a powder whose protein, moisture, colour and particle size all depend on the raw eggs, the heat treatment and the finishing step.

None of those names is a controlled grade. “Egg white protein” can describe a powder at 80% protein on a dry basis and one at 85%, a fine milled powder and a coarse agglomerate, a product with no carrier and one with a processing aid. “Egg white protein isolate” is a trade name rather than a regulated category, so the buyer has to read the protein basis and the ingredient list instead of trusting the noun.

The grade therefore has three parts: the protein floor, the physical form and the heat history. The first is arithmetic, the second changes the filling line, and the third changes how the proteins behave in water.

The two catalogue forms side by side

Standard milled and instantized egg white protein · catalogue limits
PointStandard 80 meshInstantized, on request
Protein, dry basis≥80.0% (N × 6.25)≥80.0% (N × 6.25)
Protein, as-is at 8.0% moisture73.6%73.6%
Moisture≤8.0%≤8.0%
Fat and ash≤1.0% and ≤5.0%≤1.0% and ≤5.0%
Particle size≥95% through 80 meshAgglomerated; profile agreed
Bulk densityHigherLower
In waterDusts, wets slowly, can lumpWets faster, less dust
Usual fitCapsules, bars, blendsStick packs, drink mixes

The table describes two forms of one specification, not two products. A tighter protein floor is a separate agreement: the catalogue says ≥80.0%, and a buyer who needs 85.0% has to put that number into the specification rather than infer it from a grade name. Whatever the floor, the factor stays 6.25 and the basis stays dry.

What changes in the drum and on the line

The standard powder is milled to pass 80 mesh. It is fine, it carries static, and it tends to float on water before it wets. On a filling line that means dust, bridging in the hopper and a risk of lumps in the sachet if the powder is packed warm or in humid air. Instantizing builds larger, porous particles that sink and disperse more quickly, which shortens the mixing step and reduces dust.

The trade is bulk density. An agglomerated powder fills a scoop with less mass, so a 25 mL scoop that held 15 g of the standard powder may hold 11 g of the instantized one. A label built on a scoop volume is wrong the moment the form changes; the fill weight should be set on a balance, and the scoop should be sized to the powder actually bought.

Heat history is the third difference. Egg white is pasteurised before drying, and the dryer temperature and the residence time affect how much of the protein stays soluble. A powder dried harder can still pass the protein floor and lose some of its dispersion and foaming behaviour. If the application depends on foam or gel, that is a functional specification, and it belongs in the trial rather than in the protein number.

Dose arithmetic and the label

Dosing uses the as-is protein, not the dry-basis floor. At 8.0% moisture, 80.0% dry-basis protein is 73.6% of the powder as weighed. To deliver 20 g of protein the formula needs 20 ÷ 0.736 = 27.2 g of powder. A 25 g scoop delivers 18.4 g; a 30 g scoop delivers 22.1 g. Those are the numbers that belong on the panel and in the weigh-up.

The grade changes the arithmetic only if the floor changes. A powder at 85.0% dry basis with 8.0% moisture carries 78.2% as-is, and 20 g of protein then needs 25.6 g rather than 27.2 g. The 1.6 g difference is the whole benefit of the tighter floor, and it has to be paid for in the specification and the certificate.

Protein claims are calculated on the finished product, not on the powder. EU rules put “source of protein” at 12% of energy and “high protein” at 20%; US rules put “good source” at 10–19% of the Daily Value and “high” at 20% or more, with the Daily Value fixed at 50 g. A 200 kcal sachet with 20 g of protein clears the high-protein threshold whichever grade supplied it.

What to write into the specification

  • “Egg white protein (dried egg white), spray-dried, standard milled 80 mesh or instantized.”
  • “Protein ≥80.0% on a dry basis by Kjeldahl, N × 6.25.”
  • “Moisture ≤8.0%; fat ≤1.0%; ash ≤5.0%.”
  • “Particle size: ≥95% through 80 mesh, or the agreed agglomerated profile.”
  • “Identification by protein profile against an egg white reference.”
  • “Allergen statement: contains egg.”
  • “Heat treatment and any processing aid named; no undeclared carrier.”

The grade name alone does not settle any of these lines. A specification that says only “egg white protein 80%” has left the form, the factor and the allergen statement open, and those are the three points where two quotations usually differ.

When this grade is the wrong choice

Egg white protein is not a vegan material and it is not suitable for a consumer with an egg allergy, whatever the grade. It is milk-free, which is the reason many formulas use it, but “milk-free” is not “allergen-free”. A brief that asks for both a dairy-free and an allergen-free protein has no answer in this family.

It is also a poor fit where the formula needs a clear, neutral-tasting drink at a high dose, because egg white brings its own flavour and foam. The comparison with whey is set out on the egg white versus whey page, and the whey protein concentrate page carries the other specification; the certificate tests are on the COA page; the catalogue specification is on the product page; the release process is described on the quality page.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation