04 MOQ & ordering

Corn zein: MOQ, packaging and ordering

Technical document 04 · Reviewed 2026-11-20 · Corn Zein

On this page
  1. Why the minimum is 1 kg
  2. Packs and formats
  3. Lead time and dispatch
  4. What a quotation needs
  5. Qualifying a sample
  6. Terms to agree before ordering

The MOQ for corn zein is 1 kg, supplied as a 1 kg foil pouch; the standard bulk pack is a 25 kg fiber drum. Standard powder is quoted at 1–7 days from order confirmation. A firm quotation needs the material and CAS number, the protein basis and fat ceiling, the pack, the destination and Incoterm, the documents and the intended use.

In one line

One kilogram is the order unit because it is the smallest pack that can be sampled, tested and traced as a single lot.

Why the minimum is 1 kg

A 1 kg pack can cover a bench trial, a retained sample and an independent identity test. It is also small enough to ship as a parcel, which matters when a formulator needs material before the production plan is fixed. The pack carries a lot code and a certificate, so the trial is tied to a traceable unit rather than to a scoop from a drum.

Below 1 kg, the material is usually split from a larger lot and repacked. That is a repack: it adds handling, loses the original pack identity and makes the lot chain harder to follow, without changing the chemistry. The 25 kg drum lowers the handling per kilogram and ties up more inventory for longer. The minimum is a pack decision, not a volume incentive.

Zein is hygroscopic, so every opening is an exposure. A 1 kg pack that is opened for a trial and then closed is a smaller exposure than a 25 kg drum opened for the same trial. That is one reason the small pack is the qualification unit and the drum is the production unit.

Packs and formats

Standard corn zein packs
PackNet weightTypical useNotes
Foil pouch1 kgTrial, sample, small batchMoisture barrier; reseal after opening
Fiber drum25 kgProductionInner liner; lot code on drum and liner
Granulated powderOn requestFlow and dust controlParticle profile changes; separate specification

The catalog powder is milled to 80 mesh, with ≥95% passing. Granulation is a separate specification: it changes the particle-size line and the flow, and it should be quoted as a change, not slipped into the same pack code. The foil pouch is the moisture barrier for a 1 kg order; the drum relies on its inner liner, so the liner has to be closed after sampling. Neither pack makes the powder non-hygroscopic.

Lead time and dispatch

Standard powder is quoted at 1–7 days from confirmation. Picking, document preparation and dispatch sit inside that window; transit, customs clearance and the customer's own quality release do not. A granulated or otherwise custom pack needs its own date, and the quotation should state it separately.

Ask for the dispatch date, not only the range. The Incoterm decides who books freight and who clears entry, and the documents should travel with the same lot as the powder. A certificate that arrives after the drum has been sampled is a certificate for a lot the customer cannot identify.

What a quotation needs

Six details make a quotation comparable:

  1. The material and its identity. Corn zein, CAS 9010-66-6, with the corn fraction and extraction route named.
  2. The specification. Protein factor and basis, fat ceiling, ash, moisture and mesh.
  3. The pack. 1 kg pouch, 25 kg drum or a granulated variant.
  4. The destination and Incoterm. The delivery point and the trade term.
  5. The document set. COA, specification, SDS, allergen statement, GMO statement and any residual-solvent or mycotoxin statement.
  6. The intended use and market. Coating, capsule, film or another use, and where the finished product will be sold.

Without the protein basis, the fat ceiling and the market, a quotation is only a weight and a pack. Commercial terms are stated on the quotation, not on this page.

Qualifying a sample

The 1 kg pouch is the qualification unit. Test identity, protein with the factor and basis, fat, moisture and microbiology, and keep part of the same pack as the retained sample. If the material is bought for a film, cast a film from the sample and test its appearance and flexibility. The lot code should appear on the sample, the COA and the quotation; a sample without a lot code cannot support a specification decision.

A bench-scale split is a repack, not the catalog pack. Ask for it explicitly and record it. The trial lot and the production drum are not guaranteed to be the same lot, even when the specification is identical.

Terms to agree before ordering

The quotation carries the commercial terms; the quality agreement carries the rest. Write down the specification revision, one COA per lot, the retained sample, the retest period and the route for approving a change to the source, the solvent or the pack. Those five lines prevent most disputes.

If a lot fails, use the retained sample and a joint re-test against the named method. A photograph is not evidence. Agree the referee laboratory and who pays for it before the dispute, not after. The product hub holds the catalog data; the COA page lists the release tests; the compliance page covers market files; the MOQ glossary entry defines the term; the quality page describes release.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation